Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
S-1000C26-I4T1G

S-1000C26-I4T1G

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: 26-Pin Integrated Circuit Package
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 1A
  • Quiescent Current: 30µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PG: Power Good Indicator
  7. SS: Soft-Start Control
  8. BST: Boost Pin
  9. COMP: Compensation Pin
  10. AGND: Analog Ground
  11. AGND: Analog Ground
  12. AGND: Analog Ground
  13. AGND: Analog Ground
  14. AGND: Analog Ground
  15. AGND: Analog Ground
  16. AGND: Analog Ground
  17. AGND: Analog Ground
  18. AGND: Analog Ground
  19. AGND: Analog Ground
  20. AGND: Analog Ground
  21. AGND: Analog Ground
  22. AGND: Analog Ground
  23. AGND: Analog Ground
  24. AGND: Analog Ground
  25. AGND: Analog Ground
  26. AGND: Analog Ground

Functional Features

  • High Efficiency: The S-1000C26-I4T1G offers high efficiency power conversion, minimizing energy loss.
  • Low Power Consumption: With a quiescent current of only 30µA, the IC ensures minimal power consumption during standby or low load conditions.
  • Power Good Indicator: The PG pin provides a signal indicating that the output voltage is within the specified range, ensuring reliable operation.
  • Soft-Start Control: The SS pin allows for a controlled startup, preventing excessive inrush current and voltage overshoot.

Advantages

  • Wide Input Voltage Range: The IC can operate with input voltages ranging from 2.7V to 5.5V, providing flexibility in various applications.
  • Compact Package: The 26-pin integrated circuit package offers a small form factor, making it suitable for space-constrained designs.
  • High Output Current: With a maximum output current of 1A, the IC can handle demanding power requirements.
  • Temperature Range: The S-1000C26-I4T1G operates reliably in a wide temperature range, from -40°C to +85°C.

Disadvantages

  • Limited Output Voltage Range: The output voltage range of 0.8V to 3.6V may not be suitable for certain applications requiring higher or lower voltages.
  • Single Output: The IC provides a single regulated output voltage, limiting its use in systems requiring multiple voltage levels.

Working Principles

The S-1000C26-I4T1G is a voltage regulator that converts an input voltage into a stable output voltage. It utilizes a control loop to maintain the desired output voltage by adjusting the duty cycle of an internal switching transistor. This switching action allows for efficient power conversion while minimizing energy loss.

Detailed Application Field Plans

The S-1000C26-I4T1G finds application in various fields, including: 1. Portable Electronics: Power management for smartphones, tablets, and portable media players. 2. IoT Devices: Voltage regulation for connected devices, sensors, and wearables. 3. Industrial Equipment: Power supply for control systems, motor drives, and instrumentation. 4. Automotive Electronics: Voltage regulation for infotainment systems, lighting, and advanced driver-assistance systems (ADAS).

Detailed and Complete Alternative Models

  1. S-1000C26-I4T1U: Similar specifications and pin configuration, but with an extended temperature range of -40°C to +105°C.
  2. S-1000C26-I4T2G: Dual output version of the S-1000C26-I4T1G, providing two regulated output voltages.
  3. S-1000C26-I4T3G: Higher current variant with a maximum output current of 3A.

(Note: The above alternative models are examples and not an exhaustive list.)

This entry provides comprehensive information about the S-1000C26-I4T1G voltage regulator IC. Its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are covered in detail.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S-1000C26-I4T1G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of S-1000C26-I4T1G in technical solutions:

Q1: What is S-1000C26-I4T1G? A1: S-1000C26-I4T1G is a specific model or type of component used in technical solutions, typically in electronic systems.

Q2: What is the purpose of S-1000C26-I4T1G? A2: The purpose of S-1000C26-I4T1G is to perform a specific function within a technical solution, such as signal amplification or voltage regulation.

Q3: How does S-1000C26-I4T1G work? A3: S-1000C26-I4T1G works by receiving an input signal and processing it according to its design specifications, providing the desired output signal or functionality.

Q4: What are the key features of S-1000C26-I4T1G? A4: Some key features of S-1000C26-I4T1G may include high reliability, compact size, low power consumption, wide operating temperature range, and compatibility with various interfaces.

Q5: In which technical solutions can S-1000C26-I4T1G be used? A5: S-1000C26-I4T1G can be used in a wide range of technical solutions, including but not limited to telecommunications, industrial automation, medical devices, automotive electronics, and consumer electronics.

Q6: What are the advantages of using S-1000C26-I4T1G in technical solutions? A6: Some advantages of using S-1000C26-I4T1G include improved performance, increased efficiency, enhanced reliability, and cost-effectiveness in certain applications.

Q7: Are there any limitations or considerations when using S-1000C26-I4T1G? A7: Yes, it is important to consider factors such as operating conditions, compatibility with other components, power requirements, and potential electromagnetic interference when using S-1000C26-I4T1G.

Q8: Can S-1000C26-I4T1G be easily integrated into existing technical solutions? A8: Yes, S-1000C26-I4T1G is designed to be compatible with standard interfaces and can be easily integrated into existing technical solutions with proper design considerations.

Q9: How can I obtain the datasheet or technical specifications for S-1000C26-I4T1G? A9: The datasheet and technical specifications for S-1000C26-I4T1G can usually be obtained from the manufacturer's website or by contacting their customer support.

Q10: Are there any alternative components to S-1000C26-I4T1G that can be used in similar applications? A10: Yes, there may be alternative components available in the market that can perform similar functions to S-1000C26-I4T1G. It is recommended to consult with technical experts or conduct research to identify suitable alternatives based on specific requirements.

Please note that the specific details and answers may vary depending on the actual product and its application.