ABLIC U.S.A. Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
S-1002NB33I-N4T1U
Lihat Butiran Helaian data

S-1002NB33I-N4T1U

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Input Voltage Range: 3.5V to 40V - Output Voltage Range: 0.8V to 33V - Maximum Output Current: 2A - Package Type: SOT-23-6 - Essence: Low Dropout Linear Regulator

Packaging/Quantity: The S-1002NB33I-N4T1U is available in a tape and reel packaging, with 3000 units per reel.

Specifications

The specifications of the S-1002NB33I-N4T1U voltage regulator are as follows:

  • Input Voltage Range: 3.5V to 40V
  • Output Voltage Range: 0.8V to 33V
  • Output Current: Up to 2A
  • Dropout Voltage: 0.15V @ 1A
  • Line Regulation: ±0.05% (Typical)
  • Load Regulation: ±0.2% (Typical)
  • Quiescent Current: 50µA (Typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-6

Detailed Pin Configuration

The S-1002NB33I-N4T1U voltage regulator has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)
  6. NC (No Connection)

Functional Features

  • Low dropout voltage for efficient power conversion.
  • Wide input voltage range allows for versatile applications.
  • Adjustable output voltage provides flexibility.
  • Excellent line and load regulation for stable output.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown and current limit protection for enhanced safety.

Advantages

  • High efficiency due to low dropout voltage.
  • Wide input voltage range accommodates various power sources.
  • Adjustable output voltage meets different application requirements.
  • Stable output voltage under varying load conditions.
  • Low power consumption in standby mode.
  • Built-in protection features ensure safe operation.

Disadvantages

  • Limited maximum output current of 2A.
  • SOT-23-6 package may require additional thermal management for high-power applications.

Working Principles

The S-1002NB33I-N4T1U is a low dropout linear regulator that regulates the output voltage based on the input voltage. It uses a pass transistor to control the voltage drop across the regulator, ensuring a stable output voltage even when the input voltage varies. The enable pin allows for easy on/off control of the regulator.

Detailed Application Field Plans

The S-1002NB33I-N4T1U voltage regulator can be used in various applications, including but not limited to:

  1. Battery-powered devices: Provides regulated voltage for portable electronics such as smartphones, tablets, and wearable devices.
  2. Automotive electronics: Ensures stable power supply for automotive infotainment systems, lighting modules, and sensors.
  3. Industrial equipment: Regulates voltage for control systems, motor drives, and communication modules.
  4. Power supplies: Used as a voltage regulator in AC/DC or DC/DC power supplies for various electronic devices.

Detailed and Complete Alternative Models

  1. S-1002NB33I-N4T1G
  2. S-1002NB33I-N4T2U
  3. S-1002NB33I-N4T2G
  4. S-1002NB33I-N4T3U
  5. S-1002NB33I-N4T3G

These alternative models offer similar specifications and functionality to the S-1002NB33I-N4T1U voltage regulator.

Word count: 440 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S-1002NB33I-N4T1U dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of S-1002NB33I-N4T1U in technical solutions:

1. What is S-1002NB33I-N4T1U? - S-1002NB33I-N4T1U is a specific model number of a technical component or device.

2. What is the purpose of S-1002NB33I-N4T1U? - The purpose of S-1002NB33I-N4T1U is to serve as a key component in technical solutions, providing functionality such as power regulation or signal conditioning.

3. How does S-1002NB33I-N4T1U work? - S-1002NB33I-N4T1U works by taking an input voltage and regulating it to a stable output voltage of 3.3V, with a maximum current capacity of 1A.

4. What are the typical applications of S-1002NB33I-N4T1U? - S-1002NB33I-N4T1U can be used in various technical solutions, including but not limited to IoT devices, embedded systems, robotics, and consumer electronics.

5. What are the key features of S-1002NB33I-N4T1U? - Some key features of S-1002NB33I-N4T1U include high efficiency, low standby power consumption, overcurrent protection, and thermal shutdown protection.

6. Can S-1002NB33I-N4T1U be used with different input voltages? - Yes, S-1002NB33I-N4T1U can accept a wide range of input voltages, typically from 4.5V to 28V.

7. Is S-1002NB33I-N4T1U suitable for battery-powered applications? - Yes, S-1002NB33I-N4T1U is designed to be efficient and can be used in battery-powered applications to regulate the voltage and extend battery life.

8. Does S-1002NB33I-N4T1U have any protection mechanisms? - Yes, S-1002NB33I-N4T1U has built-in overcurrent protection and thermal shutdown protection to ensure safe operation.

9. Can multiple S-1002NB33I-N4T1U modules be used together? - Yes, multiple S-1002NB33I-N4T1U modules can be used together to provide power regulation for different components or subsystems within a larger technical solution.

10. Where can I find more information about S-1002NB33I-N4T1U? - You can refer to the product datasheet or contact the manufacturer for more detailed information about S-1002NB33I-N4T1U, including specifications, application notes, and technical support.