ABLIC U.S.A. Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
S-80122ANMC-JCHT2G
Lihat Butiran Helaian data

S-80122ANMC-JCHT2G

Product Overview

Category

S-80122ANMC-JCHT2G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management purposes.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • Low power consumption

Package

The S-80122ANMC-JCHT2G is available in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of this product lies in its ability to regulate voltage and manage power efficiently, ensuring stable and reliable operation of electronic devices.

Packaging/Quantity

The S-80122ANMC-JCHT2G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.0V - 5.5V
  • Maximum Output Current: 200mA
  • Quiescent Current: 20µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-80122ANMC-JCHT2G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Overcurrent protection
  • Thermal shutdown protection
  • Low dropout voltage
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Compact size
  • Low power consumption
  • Protection features ensure device safety

Disadvantages

  • Limited maximum output current (200mA)

Working Principles

The S-80122ANMC-JCHT2G operates based on a voltage regulation principle. It takes an input voltage within the specified range and provides a regulated output voltage, ensuring stable power supply to connected electronic devices.

Detailed Application Field Plans

The S-80122ANMC-JCHT2G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. S-80122BNMC-JCHT2G
  2. S-80122CNMC-JCHT2G
  3. S-80122DNMC-JCHT2G
  4. S-80122ENMC-JCHT2G

These alternative models offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, the S-80122ANMC-JCHT2G is an integrated circuit used for voltage regulation and power management in electronic devices. Its compact size, low power consumption, and protection features make it suitable for various applications. However, its limited maximum output current should be considered when designing high-power devices.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S-80122ANMC-JCHT2G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of S-80122ANMC-JCHT2G in technical solutions:

  1. Q: What is S-80122ANMC-JCHT2G? A: S-80122ANMC-JCHT2G is a specific model of voltage detector IC (Integrated Circuit) manufactured by a company called Seiko Instruments. It is commonly used in various technical solutions.

  2. Q: What is the purpose of S-80122ANMC-JCHT2G? A: The purpose of this voltage detector IC is to monitor the voltage level of a power supply and provide an output signal when the voltage exceeds or falls below a certain threshold.

  3. Q: How does S-80122ANMC-JCHT2G work? A: S-80122ANMC-JCHT2G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage crosses the threshold, it triggers the output signal.

  4. Q: What are the typical applications of S-80122ANMC-JCHT2G? A: This voltage detector IC is commonly used in battery-powered devices, power management systems, automotive electronics, industrial equipment, and other applications where monitoring voltage levels is critical.

  5. Q: What is the operating voltage range of S-80122ANMC-JCHT2G? A: The operating voltage range of this IC is typically between 0.8V and 6.0V, making it suitable for a wide range of electronic systems.

  6. Q: Can S-80122ANMC-JCHT2G be used in both AC and DC circuits? A: No, this voltage detector IC is designed specifically for DC circuits and may not function properly in AC circuits.

  7. Q: What is the output configuration of S-80122ANMC-JCHT2G? A: The output of this IC can be configured as either an active-high or active-low signal, depending on the specific application requirements.

  8. Q: Does S-80122ANMC-JCHT2G have any built-in protection features? A: Yes, this IC includes built-in overvoltage and undervoltage detection, as well as a hysteresis function to prevent false triggering due to voltage fluctuations.

  9. Q: Can S-80122ANMC-JCHT2G be used in high-temperature environments? A: Yes, this IC is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C, making it suitable for various industrial applications.

  10. Q: Are there any recommended external components to use with S-80122ANMC-JCHT2G? A: It is recommended to use a bypass capacitor between VDD and GND pins to stabilize the power supply, and a pull-up resistor for the output pin if necessary, as specified in the datasheet provided by the manufacturer.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of the S-80122ANMC-JCHT2G voltage detector IC.