S-80818CLUA-B6DT2U

Product Overview

Category

S-80818CLUA-B6DT2U belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

• Voltage detection range: 1.8V to 6.0V
• Low supply current: 1.0µA (typical)
• Small package size: SOT-89-5
• Built-in delay time: 200ms (typical)

Package and Quantity

The S-80818CLUA-B6DT2U is packaged in a SOT-89-5 package. It is available in tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

• Supply voltage range: 1.8V to 6.0V
• Operating temperature range: -40°C to +85°C
• Output type: N-channel open drain
• Output voltage: VOUT = VDD - 0.15V (max)
• Quiescent current: IQ = 1.0µA (typical)

Detailed Pin Configuration

The S-80818CLUA-B6DT2U has a total of five pins arranged as follows:

```

---

| | --|----|-- |____| ```

Pin 1: GND (Ground) Pin 2: VDD (Supply Voltage) Pin 3: RESET (Reset Output) Pin 4: MR (Manual Reset Input) Pin 5: NC (No Connection)

Functional Features

• Voltage detection and reset function
• Manual reset input for immediate system reset
• Open-drain output for flexible integration with other components
• Low quiescent current for power efficiency

Advantages and Disadvantages

Advantages: - Wide voltage detection range allows for versatile applications - Low supply current minimizes power consumption - Small package size enables space-saving designs

Disadvantages: - Limited pin configuration options may restrict certain system designs - Lack of built-in protection features against voltage spikes or transients

Working Principles

The S-80818CLUA-B6DT2U operates by monitoring the input voltage (VDD) and comparing it to a reference voltage. When the VDD falls below a certain threshold, the reset output (RESET) is activated, indicating a low-voltage condition. The manual reset input (MR) can also be used to trigger an immediate system reset.

Detailed Application Field Plans

The S-80818CLUA-B6DT2U finds applications in various electronic devices where voltage detection and reset functions are required. Some potential application fields include: - Battery-powered devices - Microcontrollers and microprocessors - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

1. S-80818CLY-B6DT2U: Similar specifications but with a different package (SOT-23-5).
2. S-80818CNMC-B6JT2U: Higher voltage detection range (2.3V to 6.0V) with a smaller package (SOT-23-5).
3. S-80818CLUA-B6DT2U-T2: Same specifications as S-80818CLUA-B6DT2U but available in a tape and reel packaging with a quantity of 10000 units per reel.

Note: This is not an exhaustive list, and there may be other alternative models available from the manufacturer.

In conclusion, the S-80818CLUA-B6DT2U is an integrated circuit that provides voltage detection and reset functions. Its wide voltage detection range, low supply current, and small package size make it suitable for various electronic applications. However, designers should consider the limited pin configuration options and absence of built-in protection features. Alternative models with different packages and specifications are also available to meet specific requirements.