S-80831CLUA-B6QT2U
Product Overview
Category
S-80831CLUA-B6QT2U belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in electronic devices for voltage detection and reset functions.
Characteristics
- Voltage detection range: 1.2V to 6.0V
- Accuracy: ±2%
- Low supply current: 1.0μA (typical)
- Small package size: B6QT2U
- RoHS compliant
Package and Quantity
The S-80831CLUA-B6QT2U is available in a B6QT2U package, which is a small surface-mount package. It is typically sold in reels or tubes containing a specific quantity of units.
Essence
The essence of S-80831CLUA-B6QT2U lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.
Specifications
- Supply voltage range: 1.2V to 6.0V
- Detection voltage options: 1.2V, 1.3V, 1.5V, 1.8V, 2.0V, 2.3V, 2.5V, 2.7V, 3.0V, 3.1V, 3.3V, 3.5V, 4.0V, 4.3V, 4.5V, 4.7V, 5.0V, 5.5V, 6.0V
- Operating temperature range: -40°C to +85°C
- Output type: Open-drain
- Quiescent current: 1.0μA (typical), 2.0μA (maximum)
- Power-on reset delay time: 200ms (typical), 400ms (maximum)
Detailed Pin Configuration
The S-80831CLUA-B6QT2U has the following pin configuration:
- VDD: Supply voltage input
- GND: Ground reference
- RESET: Open-drain output for reset signal
Functional Features
Voltage Detection
S-80831CLUA-B6QT2U can accurately detect the voltage level applied to its VDD pin within the specified range. It provides a reset signal when the voltage falls below the detection threshold.
Reset Signal
The open-drain RESET pin of this IC outputs a low signal when the voltage drops below the detection threshold, indicating the need for a system reset.
Advantages and Disadvantages
Advantages
- Wide voltage detection range
- Low supply current consumption
- Small package size for space-constrained applications
- RoHS compliant, ensuring environmental friendliness
Disadvantages
- Limited detection voltage options
- Output is limited to open-drain configuration
Working Principles
The S-80831CLUA-B6QT2U operates by continuously monitoring the voltage level at its VDD pin. When the voltage falls below the preset detection threshold, the IC generates a reset signal through its open-drain output pin, indicating the need for a system reset.
Detailed Application Field Plans
The S-80831CLUA-B6QT2U finds applications in various electronic devices where voltage detection and reset functions are required. Some potential application fields include: - Battery-powered devices - Microcontrollers and microprocessors - Industrial control systems - Consumer electronics - Automotive electronics
Detailed and Complete Alternative Models
- S-80830CLUA-B6QT2U
- S-80832CLUA-B6QT2U
- S-80833CLUA-B6QT2U
- S-80834CLUA-B6QT2U
- S-80835CLUA-B6QT2U
These alternative models offer similar voltage detection and reset functionalities, but with different detection voltage options or package sizes.
Word count: 410 words
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S-80831CLUA-B6QT2U dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of S-80831CLUA-B6QT2U in technical solutions:
1. What is S-80831CLUA-B6QT2U? - S-80831CLUA-B6QT2U is a specific model of voltage detector IC (integrated circuit) manufactured by a company called Seiko Instruments. It is commonly used in various technical solutions.
2. What is the purpose of S-80831CLUA-B6QT2U? - The purpose of this voltage detector IC is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
3. How does S-80831CLUA-B6QT2U work? - S-80831CLUA-B6QT2U works by comparing the input voltage with a fixed reference voltage. When the input voltage drops below the reference voltage, it triggers the output signal.
4. What is the operating voltage range of S-80831CLUA-B6QT2U? - The operating voltage range of this IC is typically between 1.6V and 6.0V.
5. What is the output type of S-80831CLUA-B6QT2U? - The output type of this IC is an open-drain configuration, which means it can be connected to other devices or circuits for further processing.
6. What is the output voltage level of S-80831CLUA-B6QT2U? - The output voltage level is determined by the external pull-up resistor connected to the output pin. It can be set to match the voltage requirements of the connected device or circuit.
7. Can S-80831CLUA-B6QT2U be used in battery-powered applications? - Yes, this IC can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
8. Is S-80831CLUA-B6QT2U suitable for automotive applications? - Yes, this IC is designed to meet the requirements of automotive applications, including temperature range, reliability, and ESD protection.
9. Can multiple S-80831CLUA-B6QT2U ICs be used together in a system? - Yes, multiple ICs can be used together in a system to monitor different voltage levels or provide redundancy for critical applications.
10. Are there any application notes or reference designs available for S-80831CLUA-B6QT2U? - Yes, Seiko Instruments provides application notes and reference designs that can help users understand and implement S-80831CLUA-B6QT2U in their technical solutions effectively.
Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios.