ABLIC U.S.A. Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
S-80844CNY-B2-U
Lihat Butiran Helaian data

S-80844CNY-B2-U

Product Overview

Category

S-80844CNY-B2-U belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used as a voltage detector in various electronic devices.

Characteristics

  • Low power consumption
  • Wide operating voltage range
  • High accuracy
  • Compact size

Package

The S-80844CNY-B2-U comes in a small surface-mount package, making it suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to accurately detect voltage levels and provide reliable output signals.

Packaging/Quantity

The S-80844CNY-B2-U is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Operating Voltage Range: 1.6V to 6.0V
  • Detection Voltage Accuracy: ±1.5%
  • Quiescent Current: 1.0μA (typical)
  • Output Configuration: Open-drain
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-80844CNY-B2-U has the following pin configuration:

  1. VDD (Power supply input)
  2. GND (Ground)
  3. OUT (Output)

Functional Features

  • Voltage detection: The IC monitors the input voltage and provides an output signal when it reaches the specified threshold.
  • Open-drain output: The open-drain configuration allows for easy integration with other circuitry.
  • Low power consumption: The IC consumes minimal power, making it suitable for battery-powered devices.
  • Wide operating voltage range: The IC can operate within a wide range of input voltages, enhancing its versatility.

Advantages and Disadvantages

Advantages

  • Accurate voltage detection
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Disadvantages

  • Limited detection voltage accuracy (±1.5%)
  • Open-drain output may require additional circuitry for certain applications

Working Principles

The S-80844CNY-B2-U operates based on a voltage comparison principle. It compares the input voltage with a reference voltage and generates an output signal when the input voltage exceeds the specified threshold.

Detailed Application Field Plans

The S-80844CNY-B2-U finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Power management systems - Consumer electronics - Industrial control systems

Detailed and Complete Alternative Models

  • S-80844CNY-B2-T: Similar to S-80844CNY-B2-U, but with a different package type (TO-92S).
  • S-80844CNY-B2-G: Similar to S-80844CNY-B2-U, but with a different package type (SSOP5).

These alternative models offer similar functionality and characteristics, providing flexibility in choosing the most suitable package for specific applications.

Note: The content provided above is approximately 350 words. Additional information can be added to meet the required word count of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S-80844CNY-B2-U dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of S-80844CNY-B2-U in technical solutions:

1. What is S-80844CNY-B2-U? - S-80844CNY-B2-U is a specific model of voltage detector IC (integrated circuit) manufactured by a company called Seiko Instruments. It is commonly used in various technical solutions.

2. What is the purpose of S-80844CNY-B2-U? - The purpose of S-80844CNY-B2-U is to detect and monitor voltage levels in electronic circuits or systems. It provides a reliable way to ensure proper voltage regulation and protection.

3. What is the operating voltage range of S-80844CNY-B2-U? - The operating voltage range of S-80844CNY-B2-U is typically between 1.6V and 6.0V, making it suitable for a wide range of applications.

4. How does S-80844CNY-B2-U work? - S-80844CNY-B2-U works by comparing the input voltage with a reference voltage internally set within the IC. If the input voltage exceeds or falls below the specified threshold, it triggers an output signal indicating the voltage status.

5. Can S-80844CNY-B2-U be used for overvoltage protection? - Yes, S-80844CNY-B2-U can be used for overvoltage protection. By setting the appropriate threshold voltage, it can detect when the input voltage exceeds a safe limit and trigger an action to protect the circuit.

6. Is S-80844CNY-B2-U suitable for battery-powered applications? - Yes, S-80844CNY-B2-U is suitable for battery-powered applications. Its low operating voltage range and low power consumption make it ideal for use in portable devices.

7. Can S-80844CNY-B2-U be used for undervoltage detection? - Yes, S-80844CNY-B2-U can be used for undervoltage detection. By setting the appropriate threshold voltage, it can detect when the input voltage falls below a specified level and trigger an action accordingly.

8. What is the output format of S-80844CNY-B2-U? - The output format of S-80844CNY-B2-U is typically an open-drain output, which means it can be easily interfaced with other digital circuits or microcontrollers.

9. Is S-80844CNY-B2-U suitable for automotive applications? - Yes, S-80844CNY-B2-U is suitable for automotive applications. It has a wide operating temperature range and can withstand the harsh conditions often encountered in automotive environments.

10. Are there any specific precautions to consider when using S-80844CNY-B2-U? - It is recommended to follow the manufacturer's datasheet and application notes when using S-80844CNY-B2-U. Pay attention to the maximum ratings, recommended operating conditions, and proper handling to ensure reliable performance and longevity.