S-80915CLNB-G6KT2G belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80915CLNB-G6KT2G is available in a SOT-23-5 package. It is typically sold in reels containing 3000 units.
The S-80915CLNB-G6KT2G has five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: VDD (Supply Voltage) Pin 2: GND (Ground) Pin 3: MR (Manual Reset) Pin 4: RESET (Reset Output) Pin 5: VOUT (Voltage Detection Output)
The S-80915CLNB-G6KT2G operates by monitoring the input voltage and comparing it to a preset detection voltage. When the input voltage falls below the detection voltage, the reset output is activated, indicating a power failure or low voltage condition. The manual reset pin allows for external control of the reset function.
The S-80915CLNB-G6KT2G can be used in various electronic devices that require voltage monitoring and reset functionality. Some potential application fields include: - Battery-powered devices - Microcontrollers - Power management systems - Industrial automation equipment - Consumer electronics
For those seeking alternative options, the following models provide similar functionality: - S-80910CNMC-G8XT2G - S-80920CNMC-G8XT2G - S-80930CNMC-G8XT2G - S-80940CNMC-G8XT2G
These models offer comparable voltage detection ranges, package types, and characteristics to the S-80915CLNB-G6KT2G.
In conclusion, the S-80915CLNB-G6KT2G is an integrated circuit commonly used for voltage detection and reset functions. It offers accurate voltage monitoring, low power consumption, and a compact form factor. While it has some limitations in terms of pin configuration options, it provides essential features for various electronic applications.
Sure! Here are 10 common questions and answers related to the application of S-80915CLNB-G6KT2G in technical solutions:
1. What is the S-80915CLNB-G6KT2G? - The S-80915CLNB-G6KT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.
2. What is the purpose of the S-80915CLNB-G6KT2G? - The purpose of this IC is to monitor the voltage level in electronic circuits and provide an output signal when the voltage falls below a certain threshold.
3. What are the typical applications of the S-80915CLNB-G6KT2G? - This IC is commonly used in various technical solutions such as power supply monitoring, battery-powered devices, and low-voltage detection systems.
4. What is the operating voltage range of the S-80915CLNB-G6KT2G? - The operating voltage range of this IC is typically between 1.0V and 6.0V.
5. What is the output type of the S-80915CLNB-G6KT2G? - The output type of this IC is an open-drain output, which means it can be connected to other components or devices for further processing.
6. What is the quiescent current consumption of the S-80915CLNB-G6KT2G? - The quiescent current consumption of this IC is typically very low, usually in the microampere range.
7. Can the S-80915CLNB-G6KT2G withstand high temperatures? - Yes, this IC is designed to operate reliably at high temperatures, typically up to 125°C.
8. Does the S-80915CLNB-G6KT2G have built-in hysteresis? - Yes, this IC has a built-in hysteresis feature, which helps to prevent output oscillation near the detection threshold.
9. Can the S-80915CLNB-G6KT2G be used in automotive applications? - Yes, this IC is suitable for automotive applications as it meets the necessary standards and requirements.
10. Is the S-80915CLNB-G6KT2G available in different package options? - Yes, this IC is available in various package options such as SOT-23-5 and SC-82AB, providing flexibility for different design requirements.
Please note that the specific details mentioned above may vary depending on the manufacturer's specifications and datasheet of the S-80915CLNB-G6KT2G.