Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
S-80925CLMC-G6VT2U

S-80925CLMC-G6VT2U

Product Overview

Category

S-80925CLMC-G6VT2U belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

  • Voltage detection range: 1.0V to 5.0V
  • Low supply current: 1.0µA (typical)
  • Reset output type: CMOS output
  • Package type: SOT-23-5
  • Operating temperature range: -40°C to +85°C

Package and Quantity

The S-80925CLMC-G6VT2U is available in a SOT-23-5 package. Each package contains one unit of the IC.

Specifications

  • Supply voltage range: 1.0V to 5.5V
  • Detection voltage accuracy: ±1.0%
  • Quiescent current: 1.0µA (typical), 3.0µA (maximum)
  • Output leakage current: 1.0µA (maximum)
  • Output voltage low level: 0.4V (maximum)
  • Output voltage high level: VDD - 0.4V (minimum)

Pin Configuration

The S-80925CLMC-G6VT2U has the following pin configuration:

```


| | --|----|-- |____| ```

Pin 1: GND (Ground) Pin 2: RESET (Reset Output) Pin 3: VDD (Supply Voltage) Pin 4: NC (No Connection) Pin 5: VOUT (Voltage Detection Output)

Functional Features

  • Voltage detection with high accuracy
  • Low supply current consumption
  • CMOS output for easy interfacing with other devices
  • Wide operating temperature range for versatile applications

Advantages and Disadvantages

Advantages

  • Wide voltage detection range allows compatibility with various electronic devices.
  • Low supply current consumption helps in power-saving applications.
  • CMOS output simplifies integration with other circuits.

Disadvantages

  • Limited to voltage detection and reset functions, may not be suitable for complex applications requiring additional features.
  • The package size (SOT-23-5) may limit its use in space-constrained designs.

Working Principles

The S-80925CLMC-G6VT2U operates by continuously monitoring the input voltage. When the voltage falls below the detection threshold, the reset output is activated, indicating a low voltage condition. This feature is commonly used to trigger system resets or shutdowns to prevent malfunctions or data corruption.

Detailed Application Field Plans

The S-80925CLMC-G6VT2U finds application in various electronic devices where voltage monitoring and reset functionality are crucial. Some potential application fields include:

  1. Battery-powered devices: Ensuring proper operation and preventing damage due to low battery voltage.
  2. Microcontrollers and microprocessors: Resetting the system when the supply voltage drops below a certain level.
  3. Industrial control systems: Monitoring power supply integrity and initiating corrective actions in case of voltage fluctuations.
  4. Automotive electronics: Protecting sensitive components from voltage variations and ensuring reliable operation.

Detailed and Complete Alternative Models

  1. S-80925CNMC-G6XT2U: Similar specifications but available in a different package (SC-82AB).
  2. S-80925ANMC-G6XT2U: Higher detection voltage accuracy (+/- 0.5%) with similar characteristics and package as S-80925CLMC-G6VT2U.
  3. S-80925BNMC-G6XT2U: Lower quiescent current (0.5µA typical) with similar specifications and package.

These alternative models provide flexibility in choosing the most suitable option based on specific requirements and constraints.

Word count: 536 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S-80925CLMC-G6VT2U dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of S-80925CLMC-G6VT2U in technical solutions:

  1. Question: What is the operating voltage range of S-80925CLMC-G6VT2U?
    Answer: The operating voltage range of S-80925CLMC-G6VT2U is 2.0V to 6.0V.

  2. Question: What is the typical quiescent current consumption of this device?
    Answer: The typical quiescent current consumption of S-80925CLMC-G6VT2U is 1.0µA.

  3. Question: Can S-80925CLMC-G6VT2U be used as a voltage supervisor for microcontrollers?
    Answer: Yes, S-80925CLMC-G6VT2U can be used as a voltage supervisor for microcontrollers to monitor the power supply voltage and provide a reset signal when it falls below a certain threshold.

  4. Question: Does this device have an adjustable reset threshold voltage?
    Answer: No, S-80925CLMC-G6VT2U has a fixed reset threshold voltage of 2.5V.

  5. Question: What is the maximum reset output sink current of this device?
    Answer: The maximum reset output sink current of S-80925CLMC-G6VT2U is 100mA.

  6. Question: Can S-80925CLMC-G6VT2U be used in battery-powered applications?
    Answer: Yes, S-80925CLMC-G6VT2U is suitable for battery-powered applications due to its low quiescent current consumption.

  7. Question: Is this device compatible with both CMOS and TTL logic levels?
    Answer: Yes, S-80925CLMC-G6VT2U is compatible with both CMOS and TTL logic levels.

  8. Question: Does S-80925CLMC-G6VT2U have built-in hysteresis?
    Answer: Yes, this device has built-in hysteresis to prevent output oscillation near the reset threshold voltage.

  9. Question: Can S-80925CLMC-G6VT2U be used in automotive applications?
    Answer: Yes, S-80925CLMC-G6VT2U is AEC-Q100 qualified and suitable for automotive applications.

  10. Question: What is the package type of S-80925CLMC-G6VT2U?
    Answer: S-80925CLMC-G6VT2U is available in a compact SOT-23-5 package.

Please note that these answers are based on general information about the S-80925CLMC-G6VT2U. It is always recommended to refer to the datasheet and consult the manufacturer for specific application requirements.