S-80937CLPF-G67TFG belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80937CLPF-G67TFG is packaged in a SOT-23-5 package, which consists of a small plastic body with five leads. It is available in tape and reel packaging, with a quantity of 3000 units per reel.
The S-80937CLPF-G67TFG has a total of five pins arranged as follows:
```
| | --| |-- |____| | | ```
Pin 1: VDD (Supply voltage) Pin 2: GND (Ground) Pin 3: RESET (Reset output) Pin 4: MR (Manual reset input) Pin 5: VOUT (Voltage detection output)
The S-80937CLPF-G67TFG operates by continuously monitoring the input voltage and comparing it with the preset threshold voltage. When the input voltage drops below the threshold, the reset output is activated. The built-in delay circuit ensures that the reset signal remains active for a specific period, allowing sufficient time for the system to stabilize.
The S-80937CLPF-G67TFG finds extensive use in various electronic devices requiring voltage monitoring and reset functionality. Some application examples include: - Battery-powered devices - Microcontrollers and microprocessors - Power management systems - Industrial automation equipment - Consumer electronics
For those seeking alternative options, the following models offer similar features and functionalities: - S-80937CLPF-G6XTFG - S-80937CLPF-G6YTFG - S-80937CLPF-G6ZTFG - S-80937CLPF-G70TFG
These alternative models provide comparable voltage detection ranges, package sizes, and performance characteristics.
In conclusion, the S-80937CLPF-G67TFG is a versatile integrated circuit used for voltage detection and reset functions. Its wide voltage detection range, low power consumption, and small package size make it suitable for various electronic applications. However, the limited number of available reset threshold voltage options and lack of built-in hysteresis should be considered when selecting this product.
Sure! Here are 10 common questions and answers related to the application of S-80937CLPF-G67TFG in technical solutions:
Question: What is the operating voltage range for S-80937CLPF-G67TFG?
Answer: The operating voltage range for S-80937CLPF-G67TFG is typically between 2.5V and 6.0V.
Question: What is the maximum output current that can be sourced by S-80937CLPF-G67TFG?
Answer: The maximum output current that can be sourced by S-80937CLPF-G67TFG is 100mA.
Question: Can S-80937CLPF-G67TFG be used in automotive applications?
Answer: Yes, S-80937CLPF-G67TFG is suitable for automotive applications as it meets AEC-Q100 standards.
Question: Does S-80937CLPF-G67TFG have built-in overcurrent protection?
Answer: Yes, S-80937CLPF-G67TFG has built-in overcurrent protection to safeguard against excessive current draw.
Question: What is the typical quiescent current consumption of S-80937CLPF-G67TFG?
Answer: The typical quiescent current consumption of S-80937CLPF-G67TFG is around 1µA.
Question: Can S-80937CLPF-G67TFG operate in a wide temperature range?
Answer: Yes, S-80937CLPF-G67TFG has an extended temperature range of -40°C to +125°C.
Question: Is S-80937CLPF-G67TFG compatible with both CMOS and TTL logic levels?
Answer: Yes, S-80937CLPF-G67TFG is compatible with both CMOS and TTL logic levels.
Question: Does S-80937CLPF-G67TFG have a built-in power-on reset function?
Answer: Yes, S-80937CLPF-G67TFG has a built-in power-on reset function to ensure proper initialization.
Question: Can S-80937CLPF-G67TFG be used in battery-powered applications?
Answer: Yes, S-80937CLPF-G67TFG is suitable for battery-powered applications due to its low quiescent current.
Question: What package does S-80937CLPF-G67TFG come in?
Answer: S-80937CLPF-G67TFG is available in a small SOT-23-5 package for easy integration into various designs.
Please note that the answers provided above are general and may vary depending on the specific datasheet and manufacturer's specifications for S-80937CLPF-G67TFG.