S-8250BAA-I6T1U

Basic Information Overview

Category: Integrated Circuit (IC)
Use: Power Management
Characteristics: High Efficiency, Low Power Consumption
Package: BGA (Ball Grid Array)
Essence: Voltage Detector with Delay Circuit
Packaging/Quantity: Tape and Reel / 3000 units per reel

Specifications

Input Voltage Range: 1.6V to 6.0V
Output Voltage: Selectable from 1.2V to 5.0V in 0.1V increments
Detection Voltage Accuracy: ±1.5%
Operating Temperature Range: -40°C to +85°C
Quiescent Current: 1.0µA (typical)

Detailed Pin Configuration

The S-8250BAA-I6T1U has a total of 6 pins: 1. VDD: Power supply input 2. GND: Ground connection 3. OUT: Output voltage selection pin 4. EN: Enable pin for controlling the device's operation 5. CT: Capacitor connection pin for delay time adjustment 6. SS: Soft-start pin for gradual output voltage rise

Functional Features

Voltage detection with built-in delay circuit
Selectable output voltage for various applications
Low quiescent current for power-saving operation
Soft-start function for smooth voltage ramp-up

Advantages

High accuracy in voltage detection
Wide input voltage range allows versatile usage
Low power consumption for energy efficiency
Compact BGA package for space-saving designs

Disadvantages

Limited output voltage options in 0.1V increments
Not suitable for high-power applications

Working Principles

The S-8250BAA-I6T1U is a voltage detector IC that monitors the input voltage and provides a delayed output signal when the voltage reaches a certain threshold. It incorporates a built-in delay circuit that prevents false detections caused by momentary voltage fluctuations. The output voltage can be selected from a range of options, allowing flexibility in different applications.

Detailed Application Field Plans

The S-8250BAA-I6T1U is commonly used in various electronic devices where accurate voltage detection and power management are crucial. Some typical application fields include: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Wearable technology - Consumer electronics

Detailed and Complete Alternative Models

S-8250AAA-I6T1U: Similar voltage detector IC with a different package type (SSOP)
S-8250BAB-I6T1U: Voltage detector IC with adjustable hysteresis function
S-8250BCA-I6T1U: Voltage detector IC with additional overvoltage protection feature

Note: This is not an exhaustive list, and there may be other alternative models available from the manufacturer.

Word count: 346 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S-8250BAA-I6T1U dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of S-8250BAA-I6T1U in technical solutions:

Q1: What is the S-8250BAA-I6T1U? A1: The S-8250BAA-I6T1U is a specific model of voltage protection IC (Integrated Circuit) used for protecting lithium-ion rechargeable batteries from overcharging, over-discharging, and overcurrent.

Q2: What is the maximum voltage rating of S-8250BAA-I6T1U? A2: The maximum voltage rating of S-8250BAA-I6T1U is typically 4.35V.

Q3: How does S-8250BAA-I6T1U protect against overcharging? A3: S-8250BAA-I6T1U monitors the battery voltage and disconnects the charging circuit when it reaches a certain threshold, preventing overcharging.

Q4: Can S-8250BAA-I6T1U protect against over-discharging? A4: Yes, S-8250BAA-I6T1U has an integrated over-discharge protection feature that cuts off the discharge current when the battery voltage drops below a specified level.

Q5: Does S-8250BAA-I6T1U provide overcurrent protection? A5: Yes, S-8250BAA-I6T1U includes overcurrent protection, which limits the current flowing through the battery to prevent damage.

Q6: What is the operating temperature range of S-8250BAA-I6T1U? A6: The operating temperature range of S-8250BAA-I6T1U is typically -40°C to +85°C.

Q7: Can S-8250BAA-I6T1U be used in portable electronic devices? A7: Yes, S-8250BAA-I6T1U is commonly used in various portable electronic devices like smartphones, tablets, and laptops to protect their lithium-ion batteries.

Q8: Does S-8250BAA-I6T1U have short-circuit protection? A8: Yes, S-8250BAA-I6T1U incorporates short-circuit protection, which shuts off the current flow when a short circuit is detected.

Q9: What is the typical standby current consumption of S-8250BAA-I6T1U? A9: The typical standby current consumption of S-8250BAA-I6T1U is very low, usually around a few microamps.

Q10: Is S-8250BAA-I6T1U RoHS compliant? A10: Yes, S-8250BAA-I6T1U is designed to comply with the Restriction of Hazardous Substances (RoHS) directive, ensuring it meets environmental standards.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for the S-8250BAA-I6T1U.