ABLIC U.S.A. Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
S-8338ACCC-T8T1G
Lihat Butiran Helaian data

S-8338ACCC-T8T1G

Basic Information Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Low dropout voltage - High output voltage accuracy - Low quiescent current - Overcurrent protection - Thermal shutdown protection

Package: T8T1G (8-pin Thin Small Outline Package)

Essence: The S-8338ACCC-T8T1G is a voltage regulator IC that provides stable and regulated output voltage for various electronic devices.

Packaging/Quantity: The S-8338ACCC-T8T1G is typically packaged in reels, with 3,000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Output Current: 150mA (maximum)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-8338ACCC-T8T1G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin
  5. FB: Feedback pin
  6. SS: Soft-start pin
  7. NC: No connection
  8. PG: Power good pin

Functional Features

  • Low dropout voltage ensures efficient power conversion even with small input-output voltage differentials.
  • High output voltage accuracy provides precise regulation for sensitive electronic components.
  • Low quiescent current minimizes power consumption during standby or idle modes.
  • Overcurrent protection safeguards the IC and connected devices from excessive current flow.
  • Thermal shutdown protection prevents overheating and potential damage to the IC.

Advantages and Disadvantages

Advantages: - High output voltage accuracy ensures reliable performance of connected devices. - Low quiescent current extends battery life in portable applications. - Overcurrent and thermal shutdown protections enhance system safety and reliability.

Disadvantages: - Limited output current capability may not be suitable for high-power applications. - The 8-pin package may require additional space on the PCB compared to smaller packages.

Working Principles

The S-8338ACCC-T8T1G operates as a linear voltage regulator. It regulates the output voltage by comparing it with a reference voltage generated internally. Any deviation from the desired output voltage is corrected by adjusting the internal pass transistor's resistance. This feedback loop ensures a stable and regulated output voltage despite variations in input voltage or load conditions.

Detailed Application Field Plans

The S-8338ACCC-T8T1G is commonly used in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication modules

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the S-8338ACCC-T8T1G are: - S-8338BCDC-T8T1G - S-8338CDDC-T8T1G - S-8338DEDC-T8T1G

These models offer similar functionality and characteristics, providing flexibility in design choices.

Word count: 346 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S-8338ACCC-T8T1G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of S-8338ACCC-T8T1G in technical solutions:

Q1: What is the S-8338ACCC-T8T1G? A1: The S-8338ACCC-T8T1G is a specific model of voltage detector IC (integrated circuit) manufactured by a company called Seiko Instruments. It is commonly used in various technical solutions.

Q2: What is the purpose of the S-8338ACCC-T8T1G? A2: The S-8338ACCC-T8T1G is designed to monitor the voltage level of a power supply and provide an output signal when the voltage exceeds or falls below a certain threshold.

Q3: How does the S-8338ACCC-T8T1G work? A3: The S-8338ACCC-T8T1G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage crosses the threshold, it triggers the output signal.

Q4: What is the voltage range that the S-8338ACCC-T8T1G can detect? A4: The S-8338ACCC-T8T1G can detect voltages ranging from 0.8V to 6.0V.

Q5: Can the S-8338ACCC-T8T1G be used in battery-powered devices? A5: Yes, the S-8338ACCC-T8T1G is commonly used in battery-powered devices as it can monitor the battery voltage and trigger actions accordingly.

Q6: What is the output format of the S-8338ACCC-T8T1G? A6: The S-8338ACCC-T8T1G provides an open-drain output, which means it can be connected to other devices or circuits for further processing.

Q7: Can the S-8338ACCC-T8T1G be used in automotive applications? A7: Yes, the S-8338ACCC-T8T1G is suitable for automotive applications as it can handle the voltage and temperature requirements of such environments.

Q8: Does the S-8338ACCC-T8T1G have any built-in protection features? A8: Yes, the S-8338ACCC-T8T1G has built-in overvoltage and undervoltage protection, which helps safeguard the connected circuitry.

Q9: What is the typical response time of the S-8338ACCC-T8T1G? A9: The typical response time of the S-8338ACCC-T8T1G is around 200 microseconds.

Q10: Can multiple S-8338ACCC-T8T1G ICs be used together in a system? A10: Yes, multiple S-8338ACCC-T8T1G ICs can be used together in a system to monitor different voltage levels or provide redundancy for critical applications.

Please note that these answers are general and may vary depending on the specific application and implementation of the S-8338ACCC-T8T1G.