Allegro MicroSystems, LLC
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ACS715LLCTR-20A-T
Lihat Butiran Helaian data

ACS715LLCTR-20A-T

Product Overview

The ACS715LLCTR-20A-T belongs to the category of current sensor modules and is designed for use in various electronic applications. This sensor module is known for its high accuracy, low noise, and compact package, making it suitable for a wide range of current sensing applications. The ACS715LLCTR-20A-T is typically available in a small surface-mount package and is sold individually.

Specifications

  • Model: ACS715LLCTR-20A-T
  • Category: Current Sensor Module
  • Maximum Current: 20A
  • Package Type: Surface Mount
  • Output Type: Analog Voltage
  • Operating Temperature Range: -40°C to 85°C
  • Supply Voltage: 4.5V to 5.5V
  • Sensitivity: 100mV/A

Detailed Pin Configuration

The ACS715LLCTR-20A-T features a standard pin configuration with three pins: 1. VCC (Power Supply) 2. OUT (Analog Output) 3. GND (Ground)

Functional Features

  • High Accuracy
  • Low Noise
  • Compact Design
  • Wide Operating Temperature Range
  • Overcurrent Detection

Advantages and Disadvantages

Advantages

  • High Accuracy
  • Low Noise
  • Wide Operating Temperature Range
  • Small Package Size

Disadvantages

  • Limited Maximum Current Rating
  • Analog Output may require additional signal conditioning

Working Principles

The ACS715LLCTR-20A-T operates based on the principle of Hall effect sensing. When current flows through the sensor, it generates a magnetic field that is sensed by the Hall-effect sensor, producing a proportional voltage output.

Detailed Application Field Plans

The ACS715LLCTR-20A-T is commonly used in various applications, including: - Motor Control Systems - Power Supplies - Battery Management Systems - Overcurrent Protection Circuits - Industrial Automation

Detailed and Complete Alternative Models

Some alternative models to the ACS715LLCTR-20A-T include: - ACS712ELCTR-20A-T - ACS723LLCTR-20A-T - ACS770LCB-050B-PFF-T

In conclusion, the ACS715LLCTR-20A-T current sensor module offers high accuracy and reliability in a compact package, making it suitable for a wide range of electronic applications. Its functional features, advantages, and working principles make it a valuable component in various systems requiring precise current sensing capabilities.

Word Count: 314

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ACS715LLCTR-20A-T dalam penyelesaian teknikal

  1. What is the ACS715LLCTR-20A-T?

    • The ACS715LLCTR-20A-T is a high-precision, fully integrated Hall-effect-based linear current sensor with a 20A measurement range.

  2. How does the ACS715LLCTR-20A-T work?

    • The ACS715LLCTR-20A-T operates on the principle of Hall-effect sensing, which allows it to measure current by detecting the magnetic field generated by the flowing current.

  3. What are the typical applications of the ACS715LLCTR-20A-T?

    • Typical applications include motor control, load detection and management, power supplies, and overcurrent fault protection.

  4. What is the output signal of the ACS715LLCTR-20A-T?

    • The ACS715LLCTR-20A-T provides an analog output voltage proportional to the measured current, making it compatible with most microcontrollers and ADCs.

  5. How accurate is the ACS715LLCTR-20A-T?

    • The ACS715LLCTR-20A-T offers high accuracy, typically within ±1.5% at room temperature.

  6. What is the operating voltage range of the ACS715LLCTR-20A-T?

    • The ACS715LLCTR-20A-T can operate from 4.5V to 5.5V, making it suitable for various power supply configurations.

  7. Is the ACS715LLCTR-20A-T isolated?

    • No, the ACS715LLCTR-20A-T is not isolated and should be used with appropriate isolation techniques in high-voltage applications.

  8. Can the ACS715LLCTR-20A-T measure both AC and DC currents?

    • Yes, the ACS715LLCTR-20A-T can accurately measure both AC and DC currents, making it versatile for different applications.

  9. What is the response time of the ACS715LLCTR-20A-T?

    • The ACS715LLCTR-20A-T has a fast response time, typically within microseconds, allowing it to capture rapid changes in current flow.

  10. Does the ACS715LLCTR-20A-T require external calibration?

    • No, the ACS715LLCTR-20A-T is factory-calibrated and does not require additional user calibration, simplifying its integration into technical solutions.