Allegro MicroSystems, LLC
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ACS758LCB-100B-PFF-T
Lihat Butiran Helaian data

ACS758LCB-100B-PFF-T

Product Overview

The ACS758LCB-100B-PFF-T belongs to the category of current sensor integrated circuits. It is commonly used for measuring current in various electronic applications. The device is known for its high accuracy, low noise, and compact package, making it suitable for a wide range of current sensing applications. The ACS758LCB-100B-PFF-T is typically available in surface mount packages and is designed to provide precise current measurements in a variety of electrical systems.

Basic Information

  • Category: Current Sensor Integrated Circuit
  • Use: Measuring current in electronic applications
  • Characteristics: High accuracy, low noise, compact package
  • Package: Surface mount
  • Essence: Precise current measurement
  • Packaging/Quantity: Typically available in reels or tubes

Specifications

The ACS758LCB-100B-PFF-T features the following specifications: - Operating Voltage: 3V to 5.5V - Output Voltage: VCC/2 at no current flow - Sensitivity: 40mV/A - Bandwidth: DC to 120kHz - Operating Temperature Range: -40°C to 150°C - Package Type: 5-Pin CB (Leadform)

Detailed Pin Configuration

The detailed pin configuration of the ACS758LCB-100B-PFF-T is as follows: 1. VCC 2. Output 3. GND 4. NC 5. NC

Functional Features

The ACS758LCB-100B-PFF-T offers the following functional features: - High accuracy current sensing - Low-noise output - Wide operating temperature range - Small form factor for space-constrained applications

Advantages and Disadvantages

Advantages

  • High accuracy
  • Low noise
  • Wide operating temperature range
  • Compact package

Disadvantages

  • Limited current measurement range
  • Requires external calibration for precise measurements

Working Principles

The ACS758LCB-100B-PFF-T operates based on the Hall effect, where a magnetic field is used to sense the current flowing through the conductor. This principle allows for non-intrusive current measurements with high accuracy and minimal interference.

Detailed Application Field Plans

The ACS758LCB-100B-PFF-T is widely used in various application fields, including: - Power supplies - Motor control systems - Battery management systems - Industrial automation - Renewable energy systems

Detailed and Complete Alternative Models

Some alternative models to the ACS758LCB-100B-PFF-T include: - ACS758KCB-150B-PFF-T - ACS758ECB-200B-PFF-T - ACS759LCB-050B-PFF-T - ACS759LCB-100B-PFF-T

In conclusion, the ACS758LCB-100B-PFF-T is a versatile current sensor integrated circuit that offers high accuracy, low noise, and a compact package, making it suitable for a wide range of current sensing applications.

[Word Count: 413]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ACS758LCB-100B-PFF-T dalam penyelesaian teknikal

  1. What is the ACS758LCB-100B-PFF-T?

    • The ACS758LCB-100B-PFF-T is a current sensor IC (integrated circuit) that provides an economical and precise solution for AC or DC current sensing in industrial, commercial, and communications systems.

  2. What is the operating voltage range of the ACS758LCB-100B-PFF-T?

    • The operating voltage range of the ACS758LCB-100B-PFF-T is 3V to 5.5V, making it suitable for a wide range of applications.

  3. What is the output signal of the ACS758LCB-100B-PFF-T?

    • The ACS758LCB-100B-PFF-T provides an analog output voltage proportional to the sensed current, allowing for easy interfacing with microcontrollers and other control systems.

  4. What is the typical accuracy of the ACS758LCB-100B-PFF-T?

    • The ACS758LCB-100B-PFF-T offers a typical accuracy of ±1.5% over the full operating temperature range, ensuring reliable and precise current measurements.

  5. Can the ACS758LCB-100B-PFF-T be used for both AC and DC current sensing?

    • Yes, the ACS758LCB-100B-PFF-T is designed for both AC and DC current sensing applications, providing flexibility for various technical solutions.

  6. What is the bandwidth of the ACS758LCB-100B-PFF-T?

    • The bandwidth of the ACS758LCB-100B-PFF-T is sufficient for most power conversion and motor control applications, making it suitable for dynamic current sensing requirements.

  7. Is the ACS758LCB-100B-PFF-T suitable for high-current applications?

    • Yes, the ACS758LCB-100B-PFF-T can measure currents up to 100A, making it suitable for a wide range of high-current technical solutions.

  8. Does the ACS758LCB-100B-PFF-T require external calibration?

    • No, the ACS758LCB-100B-PFF-T is factory-calibrated, eliminating the need for external calibration and simplifying the integration process.

  9. What are the typical applications of the ACS758LCB-100B-PFF-T?

    • Typical applications include motor control, load detection and management, power supplies, and overcurrent fault protection in various technical solutions.

  10. Is the ACS758LCB-100B-PFF-T available in a surface-mount package?

    • Yes, the ACS758LCB-100B-PFF-T is available in a lead-free, surface-mount package, enabling easy integration into compact electronic designs.