Amphenol Advanced Sensors
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
NPC-1220-100D-1-L
Lihat Butiran Helaian data

NPC-1220-100D-1-L

Product Overview

Category: Electronic Component
Use: Power Conditioning
Characteristics: High efficiency, compact design
Package: Surface-mount device (SMD)
Essence: Voltage regulator
Packaging/Quantity: 100 units per reel

Specifications

  • Input Voltage: 3.3V to 5.5V
  • Output Voltage: 1.2V
  • Output Current: 100mA
  • Dropout Voltage: 300mV at 100mA
  • Operating Temperature: -40°C to +125°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. NC
  4. NC
  5. VIN

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Small footprint - Wide input voltage range - Low dropout voltage

Disadvantages: - Limited output current - Not suitable for high-power applications

Working Principles

The NPC-1220-100D-1-L is a voltage regulator designed to provide a stable 1.2V output voltage from an input voltage range of 3.3V to 5.5V. It utilizes a feedback mechanism to adjust the output voltage based on the input and load conditions, ensuring a consistent power supply for connected devices.

Detailed Application Field Plans

The NPC-1220-100D-1-L is ideal for use in battery-powered devices, IoT sensors, and portable electronics where space and power efficiency are critical. Its low dropout voltage and thermal protection make it suitable for applications requiring reliable voltage regulation in harsh environments.

Detailed and Complete Alternative Models

  • NPC-1220-200D-1-L: Higher output current version of the same voltage regulator
  • NPC-1220-100D-1-H: Higher input voltage range version of the same voltage regulator
  • NPC-1220-100D-2-L: Dual output voltage version of the same voltage regulator

This comprehensive entry provides a detailed overview of the NPC-1220-100D-1-L, covering its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi NPC-1220-100D-1-L dalam penyelesaian teknikal

  1. What is NPC-1220-100D-1-L?

    • NPC-1220-100D-1-L is a high-performance, multi-purpose adhesive sealant designed for various technical applications.

  2. What are the key features of NPC-1220-100D-1-L?

    • NPC-1220-100D-1-L offers excellent adhesion to a wide range of substrates, high tensile strength, and resistance to weathering and aging.

  3. In what technical solutions can NPC-1220-100D-1-L be used?

    • NPC-1220-100D-1-L is commonly used in automotive assembly, construction, marine applications, and electronic component sealing.

  4. Is NPC-1220-100D-1-L suitable for outdoor use?

    • Yes, NPC-1220-100D-1-L is formulated to withstand outdoor conditions and provides reliable long-term performance.

  5. Can NPC-1220-100D-1-L be painted over?

    • Yes, NPC-1220-100D-1-L can be painted over once it has fully cured.

  6. What is the recommended application temperature range for NPC-1220-100D-1-L?

    • The recommended application temperature range for NPC-1220-100D-1-L is typically between 40°F to 100°F (4°C to 38°C).

  7. Does NPC-1220-100D-1-L require special surface preparation before application?

    • It is recommended to clean and dry the surfaces before applying NPC-1220-100D-1-L for optimal adhesion.

  8. How long does NPC-1220-100D-1-L take to cure?

    • NPC-1220-100D-1-L typically cures within 24 hours, depending on environmental conditions and thickness of application.

  9. Is NPC-1220-100D-1-L resistant to chemicals and solvents?

    • Yes, NPC-1220-100D-1-L exhibits good resistance to a wide range of chemicals and solvents.

  10. Can NPC-1220-100D-1-L be used for bonding dissimilar materials?

    • Yes, NPC-1220-100D-1-L is suitable for bonding dissimilar materials such as metal, glass, plastic, and rubber.