QD Devices Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ADG507AKRU
Lihat Butiran Helaian data

ADG507AKRU

Product Overview

Category

ADG507AKRU belongs to the category of analog multiplexers/demultiplexers.

Use

This product is commonly used in electronic circuits for signal routing and switching applications.

Characteristics

  • Analog multiplexer with 8 channels
  • Low on-resistance: typically 50 ohms
  • Wide supply voltage range: ±4.5V to ±18V
  • Fast switching speed: typically 100 ns
  • Low power consumption: typically 1.5 mW

Package

ADG507AKRU is available in a small outline package (SOIC) with 16 pins.

Essence

The essence of ADG507AKRU lies in its ability to efficiently route analog signals in electronic systems, providing flexibility and control over signal paths.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Number of Channels: 8
  • On-Resistance: 50 ohms (typical)
  • Supply Voltage Range: ±4.5V to ±18V
  • Switching Speed: 100 ns (typical)
  • Power Consumption: 1.5 mW (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

Pin | Name | Description --- | ---- | ----------- 1 | VDD | Positive Supply Voltage 2 | IN1 | Channel 1 Input 3 | IN2 | Channel 2 Input 4 | IN3 | Channel 3 Input 5 | IN4 | Channel 4 Input 6 | IN5 | Channel 5 Input 7 | IN6 | Channel 6 Input 8 | IN7 | Channel 7 Input 9 | IN8 | Channel 8 Input 10 | GND | Ground 11 | S1 | Address Selection Input 1 12 | S0 | Address Selection Input 0 13 | E | Enable Input 14 | A | Analog Switch Output 15 | B | Analog Switch Output 16 | VSS | Negative Supply Voltage

Functional Features

  • High channel-to-channel isolation
  • Low distortion and crosstalk
  • Break-before-make switching action
  • Wide operating temperature range
  • ESD protection on all pins

Advantages and Disadvantages

Advantages

  • Low on-resistance ensures minimal signal attenuation
  • Fast switching speed allows for rapid signal routing
  • Wide supply voltage range enables compatibility with various systems
  • Low power consumption reduces energy usage

Disadvantages

  • Limited number of channels (8)
  • Not suitable for high-frequency applications

Working Principles

ADG507AKRU operates based on the principle of analog multiplexing. It uses a combination of address selection inputs (S1, S0) to control which input channel is connected to the output. The enable input (E) determines whether the switch is active or in a high-impedance state.

Detailed Application Field Plans

ADG507AKRU finds applications in various fields, including: 1. Audio signal routing in mixing consoles 2. Data acquisition systems 3. Test and measurement equipment 4. Industrial automation 5. Telecommunications

Detailed and Complete Alternative Models

  1. ADG508AKRU: Similar to ADG507AKRU but with 1 additional channel.
  2. ADG506AKRU: Analog multiplexer with 6 channels, suitable for smaller-scale applications.
  3. ADG509AKRU: Analog demultiplexer with 8 channels, allowing for signal distribution.

These alternative models provide options with varying channel counts to suit different requirements.

Word count: 524 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ADG507AKRU dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ADG507AKRU in technical solutions:

  1. Q: What is the ADG507AKRU? A: The ADG507AKRU is a multiplexer/demultiplexer IC (Integrated Circuit) that allows for the selection of one input from multiple inputs or the distribution of one input to multiple outputs.

  2. Q: What is the voltage range supported by the ADG507AKRU? A: The ADG507AKRU supports a wide voltage range of ±15V, making it suitable for various applications.

  3. Q: How many channels does the ADG507AKRU have? A: The ADG507AKRU has 8 channels, which means it can handle up to 8 different inputs or outputs.

  4. Q: Can the ADG507AKRU be used for both analog and digital signals? A: Yes, the ADG507AKRU is designed to handle both analog and digital signals, making it versatile for different applications.

  5. Q: What is the maximum frequency supported by the ADG507AKRU? A: The ADG507AKRU can support frequencies up to 100MHz, making it suitable for high-speed signal switching.

  6. Q: Is the ADG507AKRU compatible with TTL (Transistor-Transistor Logic) signals? A: Yes, the ADG507AKRU is compatible with TTL logic levels, allowing for seamless integration with TTL-based systems.

  7. Q: Can the ADG507AKRU be cascaded to increase the number of channels? A: Yes, multiple ADG507AKRU ICs can be cascaded together to increase the number of channels and expand the functionality of the system.

  8. Q: What is the power supply voltage required for the ADG507AKRU? A: The ADG507AKRU requires a power supply voltage in the range of ±4.5V to ±18V.

  9. Q: Does the ADG507AKRU have built-in protection features? A: Yes, the ADG507AKRU has built-in ESD (Electrostatic Discharge) protection on all pins, ensuring robustness and reliability.

  10. Q: What package does the ADG507AKRU come in? A: The ADG507AKRU is available in a 16-lead TSSOP (Thin Shrink Small Outline Package), which is compact and suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.