QD Devices Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ADM211EARSZ
Lihat Butiran Helaian data

ADM211EARSZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Communication and signal processing
  • Characteristics: High-speed, low-power, voltage level translation
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Voltage Level Translator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Logic Voltage Range: 1.65V to 5.5V
  • Maximum Data Rate: 20 Mbps
  • Number of Channels: 2
  • Input/Output Type: Bi-directional
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ADM211EARSZ IC has a total of 16 pins, which are assigned as follows:

  1. VCC1: Positive supply voltage for Channel 1
  2. A1: Channel 1 input/output pin
  3. B1: Channel 1 input/output pin
  4. GND1: Ground for Channel 1
  5. RE1: Receiver enable for Channel 1
  6. DE1: Driver enable for Channel 1
  7. VCC2: Positive supply voltage for Channel 2
  8. A2: Channel 2 input/output pin
  9. B2: Channel 2 input/output pin
  10. GND2: Ground for Channel 2
  11. RE2: Receiver enable for Channel 2
  12. DE2: Driver enable for Channel 2
  13. RO: Receiver output
  14. DI: Driver input
  15. GND: Ground
  16. VCC: Positive supply voltage

Functional Features

  • Bidirectional voltage level translation between two logic levels
  • Supports data rates up to 20 Mbps
  • Low power consumption
  • Wide supply voltage range for compatibility with various systems
  • Receiver and driver enable pins for flexible control

Advantages and Disadvantages

Advantages: - High-speed data transmission - Low power consumption - Wide supply voltage range - Bi-directional communication

Disadvantages: - Limited number of channels (2) - Relatively small package size

Working Principles

The ADM211EARSZ is a voltage level translator that enables bidirectional communication between two logic levels. It operates by converting the input logic levels to the corresponding output logic levels, allowing seamless data transfer between devices operating at different voltage levels. The IC uses internal circuitry to ensure accurate translation while minimizing power consumption.

Detailed Application Field Plans

The ADM211EARSZ is commonly used in various communication and signal processing applications, including:

  1. Serial communication interfaces (e.g., UART, SPI, I2C) where voltage level translation is required between microcontrollers and peripheral devices.
  2. Industrial automation systems that involve interfacing between different voltage domains.
  3. Battery-powered devices where low power consumption is crucial.
  4. Sensor networks requiring voltage level translation between sensor nodes and central processing units.

Detailed and Complete Alternative Models

  1. SN74LV1T34DBVR: Single-channel voltage level translator with similar specifications.
  2. PCA9306DCUR: Dual-channel bidirectional voltage level translator with automatic direction sensing.
  3. TXB0108PWR: Eight-channel voltage level translator with high-speed operation.

These alternative models offer similar functionality and can be considered as alternatives to the ADM211EARSZ based on specific application requirements.

Word count: 399 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ADM211EARSZ dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ADM211EARSZ in technical solutions:

  1. Q: What is ADM211EARSZ? A: ADM211EARSZ is a high-speed, half-duplex RS-232/V.28 transceiver IC that operates on a single 5V power supply.

  2. Q: What are the key features of ADM211EARSZ? A: Some key features include ±15 kV ESD protection, low power consumption, wide operating temperature range, and compatibility with various logic families.

  3. Q: How can I use ADM211EARSZ in my technical solution? A: ADM211EARSZ can be used as an interface between microcontrollers or other digital devices and RS-232 communication lines.

  4. Q: What is the maximum data rate supported by ADM211EARSZ? A: ADM211EARSZ supports data rates up to 120 kbps.

  5. Q: Can ADM211EARSZ be used in industrial applications? A: Yes, ADM211EARSZ is suitable for industrial applications due to its wide operating temperature range and robust ESD protection.

  6. Q: Does ADM211EARSZ require external components for operation? A: Yes, ADM211EARSZ requires external capacitors and resistors for proper operation.

  7. Q: Is ADM211EARSZ compatible with both 3.3V and 5V logic levels? A: Yes, ADM211EARSZ is compatible with both 3.3V and 5V logic levels, making it versatile for different system designs.

  8. Q: Can ADM211EARSZ be used in multi-drop RS-485 networks? A: No, ADM211EARSZ is specifically designed for RS-232/V.28 communication and does not support RS-485 networks.

  9. Q: What is the typical power consumption of ADM211EARSZ? A: The typical power consumption of ADM211EARSZ is around 5 mW.

  10. Q: Are there any application notes or reference designs available for ADM211EARSZ? A: Yes, Analog Devices provides application notes and reference designs that can help in implementing ADM211EARSZ in various technical solutions.

Please note that these answers are general and may vary depending on specific requirements and use cases.