QD Devices Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ADR02BRZ
Lihat Butiran Helaian data

ADR02BRZ

Product Overview

Category: Integrated Circuits (ICs)

Use: Voltage Reference

Characteristics: - High accuracy - Low temperature coefficient - Low dropout voltage - Low quiescent current

Package: SOT-23

Essence: ADR02BRZ is a precision voltage reference IC that provides a stable and accurate output voltage.

Packaging/Quantity: The ADR02BRZ is available in a SOT-23 package and is typically sold in reels of 3000 units.

Specifications

  • Output Voltage: 2.5V
  • Initial Accuracy: ±0.1%
  • Temperature Coefficient: 10ppm/°C
  • Dropout Voltage: 300mV
  • Quiescent Current: 120µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The ADR02BRZ has three pins:

  1. VOUT: Output pin, provides the stable reference voltage.
  2. GND: Ground pin, connected to the system ground.
  3. VIN: Input pin, receives the input voltage.

Functional Features

  • High accuracy and stability: The ADR02BRZ offers a precise and stable output voltage, ensuring reliable performance in various applications.
  • Low temperature coefficient: The low temperature coefficient minimizes the impact of temperature variations on the output voltage, enhancing overall accuracy.
  • Low dropout voltage: With a low dropout voltage, the ADR02BRZ can operate efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: The low quiescent current consumption helps conserve power and extends battery life in portable devices.

Advantages and Disadvantages

Advantages: - High accuracy and stability - Low temperature coefficient - Low dropout voltage - Low quiescent current

Disadvantages: - Limited output voltage options (only 2.5V)

Working Principles

The ADR02BRZ utilizes a bandgap voltage reference circuit to generate a stable and accurate output voltage. It compensates for temperature variations by employing a combination of bipolar and CMOS technologies, resulting in a low temperature coefficient.

Detailed Application Field Plans

The ADR02BRZ is commonly used in various applications that require a precise and stable voltage reference. Some typical application fields include:

  1. Analog-to-Digital Converters (ADCs)
  2. Digital-to-Analog Converters (DACs)
  3. Voltage regulators
  4. Precision instrumentation
  5. Sensor calibration

Detailed and Complete Alternative Models

  1. ADR01BRZ: Provides a 1.25V output voltage with similar characteristics.
  2. ADR03BRZ: Offers a 3.0V output voltage with comparable specifications.
  3. ADR10BRZ: Provides a 10.0V output voltage with similar performance.

These alternative models can be considered based on specific voltage requirements and application needs.

Word count: 309 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ADR02BRZ dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ADR02BRZ in technical solutions:

  1. Q: What is ADR02BRZ? A: ADR02BRZ is a specific model number for an Analog Devices voltage reference IC.

  2. Q: What is the purpose of ADR02BRZ? A: ADR02BRZ is designed to provide a stable and accurate voltage reference for various applications.

  3. Q: What is the voltage output range of ADR02BRZ? A: The voltage output range of ADR02BRZ is typically between 2.5V and 5V.

  4. Q: How accurate is ADR02BRZ? A: ADR02BRZ has a typical accuracy of ±0.1% or better, depending on the operating conditions.

  5. Q: Can ADR02BRZ operate over a wide temperature range? A: Yes, ADR02BRZ is designed to operate reliably over a wide temperature range, typically from -40°C to +125°C.

  6. Q: What is the power supply requirement for ADR02BRZ? A: ADR02BRZ requires a single positive power supply voltage, typically between 4.5V and 18V.

  7. Q: Can ADR02BRZ be used in battery-powered applications? A: Yes, ADR02BRZ can be used in battery-powered applications as it has low power consumption.

  8. Q: Is ADR02BRZ suitable for precision measurement applications? A: Yes, ADR02BRZ is commonly used in precision measurement applications due to its high accuracy and stability.

  9. Q: Can ADR02BRZ be used in industrial control systems? A: Yes, ADR02BRZ is suitable for use in industrial control systems where accurate voltage references are required.

  10. Q: Are there any specific precautions to consider when using ADR02BRZ? A: It is recommended to follow the manufacturer's datasheet and application notes for proper usage and precautions, such as thermal considerations and decoupling capacitor placement.

Please note that these answers are general and may vary depending on the specific requirements and conditions of your technical solution.