QD Devices Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ADR130BUJZ-R2
Lihat Butiran Helaian data

ADR130BUJZ-R2

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Reference

Characteristics: - High precision voltage reference - Low temperature coefficient - Wide operating temperature range - Low power consumption

Package: SOT-23

Essence: ADR130BUJZ-R2 is a high-performance voltage reference IC used to provide a stable and accurate voltage reference in various electronic circuits.

Packaging/Quantity: The ADR130BUJZ-R2 is typically sold in reels containing 3000 units.

Specifications

  • Output Voltage Range: 1.24V to 5.0V
  • Initial Accuracy: ±0.05%
  • Temperature Coefficient: 10ppm/°C
  • Supply Voltage Range: 2.7V to 18V
  • Quiescent Current: 120µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The ADR130BUJZ-R2 has three pins:

  1. VOUT: Output voltage pin.
  2. GND: Ground reference pin.
  3. VIN: Input voltage pin.

Functional Features

  • High accuracy and stability: The ADR130BUJZ-R2 provides a precise and stable output voltage, ensuring reliable performance in various applications.
  • Low power consumption: With a low quiescent current of 120µA, the IC minimizes power consumption, making it suitable for battery-powered devices.
  • Wide operating temperature range: The ADR130BUJZ-R2 can operate in extreme temperature conditions, ranging from -40°C to +125°C.
  • Low temperature coefficient: The IC exhibits a low temperature coefficient of 10ppm/°C, ensuring minimal voltage drift with temperature variations.

Advantages and Disadvantages

Advantages: - High precision and accuracy - Wide operating temperature range - Low power consumption - Small package size

Disadvantages: - Limited output voltage range (1.24V to 5.0V)

Working Principles

The ADR130BUJZ-R2 utilizes a bandgap reference circuit to generate a stable and accurate output voltage. It compensates for temperature variations by employing a proportional-to-absolute-temperature (PTAT) current source and a negative temperature coefficient (NTC) resistor.

Detailed Application Field Plans

The ADR130BUJZ-R2 is commonly used in the following applications:

  1. Precision analog-to-digital converters (ADCs)
  2. Data acquisition systems
  3. Voltage regulators
  4. Battery management systems
  5. Industrial control systems

Detailed and Complete Alternative Models

  1. ADR131BUJZ-R2: Similar to ADR130BUJZ-R2, but with an extended output voltage range of 0.6V to 5.0V.
  2. ADR140BUJZ-R2: Offers higher initial accuracy of ±0.02% and lower temperature coefficient of 5ppm/°C.
  3. ADR125BUJZ-R2: Provides a lower output voltage range of 0.6V to 2.5V for specific applications.

These alternative models offer similar functionality and can be considered based on specific requirements.

Word count: 346 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ADR130BUJZ-R2 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ADR130BUJZ-R2 in technical solutions:

  1. Q: What is ADR130BUJZ-R2? A: ADR130BUJZ-R2 is a voltage reference IC (integrated circuit) manufactured by Analog Devices Inc.

  2. Q: What is the purpose of ADR130BUJZ-R2? A: The purpose of ADR130BUJZ-R2 is to provide a stable and accurate voltage reference for various electronic circuits.

  3. Q: What is the voltage output range of ADR130BUJZ-R2? A: ADR130BUJZ-R2 has a fixed voltage output of 1.3V.

  4. Q: What is the typical accuracy of ADR130BUJZ-R2? A: The typical accuracy of ADR130BUJZ-R2 is ±0.05%.

  5. Q: What is the operating temperature range of ADR130BUJZ-R2? A: ADR130BUJZ-R2 can operate within a temperature range of -40°C to +125°C.

  6. Q: Can ADR130BUJZ-R2 be used in battery-powered applications? A: Yes, ADR130BUJZ-R2 is suitable for battery-powered applications as it has low power consumption.

  7. Q: Is ADR130BUJZ-R2 compatible with both analog and digital circuits? A: Yes, ADR130BUJZ-R2 can be used in both analog and digital circuits that require a stable voltage reference.

  8. Q: Does ADR130BUJZ-R2 require any external components for operation? A: No, ADR130BUJZ-R2 is a standalone voltage reference and does not require any external components.

  9. Q: Can ADR130BUJZ-R2 be used in high-precision measurement applications? A: Yes, ADR130BUJZ-R2 is suitable for high-precision measurement applications due to its low noise and excellent stability.

  10. Q: What is the package type of ADR130BUJZ-R2? A: ADR130BUJZ-R2 is available in a small SOT-23 package, which is commonly used in compact electronic designs.

Please note that these answers are general and may vary depending on specific application requirements.