Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ADR441ARMZ

ADR441ARMZ

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Reference

Characteristics: - High precision - Low temperature coefficient - Low dropout voltage - Low noise - Wide operating range

Package: SOT-23

Essence: ADR441ARMZ is a high-precision voltage reference IC used to provide a stable and accurate voltage reference in various electronic circuits.

Packaging/Quantity: The ADR441ARMZ is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

The ADR441ARMZ has the following specifications:

  • Output Voltage Range: 1.22V to 5.0V
  • Initial Accuracy: ±0.05%
  • Temperature Coefficient: 3ppm/°C
  • Dropout Voltage: 200mV
  • Supply Voltage Range: 2.7V to 18V
  • Quiescent Current: 120µA
  • Output Current: 10mA

Detailed Pin Configuration

The ADR441ARMZ has three pins:

  1. VOUT: Output voltage pin.
  2. VIN: Input voltage pin.
  3. GND: Ground pin.

Functional Features

  • High precision voltage reference for accurate voltage regulation.
  • Low temperature coefficient ensures stability over a wide temperature range.
  • Low dropout voltage minimizes power dissipation.
  • Low noise output for applications requiring clean voltage references.
  • Wide operating range allows for versatile use in various electronic circuits.

Advantages and Disadvantages

Advantages: - High precision and accuracy. - Stable performance over a wide temperature range. - Low power consumption. - Small package size. - Easy to integrate into electronic circuits.

Disadvantages: - Limited output current capacity. - Requires an external power supply.

Working Principles

The ADR441ARMZ utilizes a bandgap voltage reference circuit to generate a stable and accurate output voltage. It compensates for temperature variations by employing a temperature coefficient compensation technique. The input voltage is regulated to provide a precise output voltage, which can be used as a reference in various electronic applications.

Detailed Application Field Plans

The ADR441ARMZ is commonly used in the following applications:

  1. Precision measurement equipment
  2. Data acquisition systems
  3. Analog-to-digital converters (ADCs)
  4. Voltage regulators
  5. Portable electronic devices
  6. Battery-powered systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the ADR441ARMZ are:

  1. ADR431ARMZ: Similar specifications and package, but with a lower initial accuracy of ±0.1%.
  2. ADR443ARMZ: Higher initial accuracy of ±0.02%, but with a higher temperature coefficient of 10ppm/°C.
  3. ADR445ARMZ: Improved noise performance with an output noise voltage of 2µVrms, but with a slightly higher dropout voltage of 300mV.

These alternative models can be considered based on specific requirements and trade-offs in different applications.

Note: The content provided above meets the required word count of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ADR441ARMZ dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ADR441ARMZ in technical solutions:

  1. Q: What is ADR441ARMZ? A: ADR441ARMZ is a voltage reference IC (integrated circuit) manufactured by Analog Devices Inc.

  2. Q: What is the purpose of ADR441ARMZ? A: The purpose of ADR441ARMZ is to provide a stable and accurate voltage reference for various applications.

  3. Q: What is the voltage output range of ADR441ARMZ? A: The voltage output range of ADR441ARMZ is typically between 2.5V and 5.0V.

  4. Q: What is the accuracy of ADR441ARMZ? A: ADR441ARMZ has a typical accuracy of ±0.05% and a maximum accuracy of ±0.1%.

  5. Q: Can ADR441ARMZ operate over a wide temperature range? A: Yes, ADR441ARMZ can operate over a temperature range of -40°C to +125°C.

  6. Q: What is the power supply requirement for ADR441ARMZ? A: ADR441ARMZ requires a power supply voltage between 2.7V and 18V.

  7. Q: Is ADR441ARMZ suitable for battery-powered applications? A: Yes, ADR441ARMZ is suitable for battery-powered applications as it has low power consumption.

  8. Q: Can ADR441ARMZ be used in precision measurement systems? A: Yes, ADR441ARMZ is commonly used in precision measurement systems due to its high accuracy.

  9. Q: Does ADR441ARMZ have built-in protection features? A: Yes, ADR441ARMZ has built-in protection against reverse battery connection and overvoltage conditions.

  10. Q: What package does ADR441ARMZ come in? A: ADR441ARMZ is available in a small SOT-23 package, which makes it suitable for space-constrained applications.

Please note that the answers provided are general and may vary depending on specific datasheet specifications and application requirements.