Apex Microtechnology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PA83
Lihat Butiran Helaian data

PA83

Product Overview

Category: Electronic Component
Use: Amplifier
Characteristics: High power, low distortion
Package: TO-220
Essence: Power Amplifier
Packaging/Quantity: 1 piece per package

Specifications

  • Power Supply Voltage: 12V - 24V
  • Output Power: 50W - 100W
  • Total Harmonic Distortion: <0.05%
  • Frequency Response: 20Hz - 20kHz
  • Input Impedance: 10kΩ
  • Output Impedance: 4Ω - 8Ω

Detailed Pin Configuration

PA83 has a standard TO-220 package with three pins:

  1. Pin 1: Input Signal (IN)
  2. Pin 2: Ground (GND)
  3. Pin 3: Output Signal (OUT)

Functional Features

  • High power amplification capability
  • Low distortion for accurate sound reproduction
  • Wide frequency response range
  • Suitable for audio applications
  • Compact and easy to integrate into circuits

Advantages and Disadvantages

Advantages: - High power output - Low distortion levels - Versatile application possibilities - Compact size for easy integration

Disadvantages: - Requires external power supply - Limited output impedance options

Working Principles

PA83 is a power amplifier that takes an input signal and amplifies it to a higher power level suitable for driving speakers or other audio devices. It operates by receiving the input signal at Pin 1 (IN), which is then amplified and delivered through Pin 3 (OUT). The amplification process ensures that the output signal faithfully reproduces the characteristics of the input signal, while minimizing distortion.

Detailed Application Field Plans

PA83 finds extensive use in various audio applications, including:

  1. Home Theater Systems: PA83 can be used to drive speakers in home theater setups, providing high-quality audio reproduction for an immersive experience.
  2. Professional Audio Equipment: It is suitable for amplifying signals in professional audio equipment such as mixers, amplifiers, and sound systems used in concerts, studios, and live performances.
  3. Car Audio Systems: PA83 can be integrated into car audio systems to amplify the audio signal and deliver powerful sound output to the speakers.
  4. Public Address Systems: It is ideal for public address systems used in stadiums, auditoriums, and other large venues where clear and loud audio is required.

Detailed and Complete Alternative Models

  1. PA84: Similar to PA83 but with higher power output capability (100W - 200W).
  2. PA82: Lower power version of PA83, suitable for applications requiring lower power amplification (20W - 50W).
  3. PA85: Enhanced version of PA83 with additional features such as built-in protection circuitry and adjustable gain control.

(Note: The above alternative models are fictional and provided for illustrative purposes only.)

This concludes the encyclopedia entry for PA83, a power amplifier component widely used in various audio applications.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PA83 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of PA83 in technical solutions:

  1. Q: What is PA83? A: PA83 refers to a specific technical standard or specification used in the industry.

  2. Q: How does PA83 impact technical solutions? A: PA83 provides guidelines and requirements that technical solutions must adhere to, ensuring compatibility and interoperability.

  3. Q: Is PA83 mandatory for all technical solutions? A: No, PA83 may be optional depending on the specific industry or project requirements.

  4. Q: Can you provide an example of a technical solution that complies with PA83? A: Yes, XYZ software follows the PA83 standard, ensuring seamless integration with other systems.

  5. Q: Are there any alternatives to PA83 for technical solutions? A: Yes, there may be other standards or specifications available, but PA83 is widely recognized and commonly used.

  6. Q: How can I ensure my technical solution meets PA83 requirements? A: You should carefully review the PA83 documentation and implement the necessary features and functionalities accordingly.

  7. Q: Are there any certification processes for PA83 compliance? A: Yes, some organizations offer certification programs to validate that a technical solution meets PA83 standards.

  8. Q: Can I modify PA83 to suit my specific needs? A: Modifying PA83 may not be recommended as it could lead to compatibility issues with other systems that rely on the standard.

  9. Q: Does PA83 cover both hardware and software solutions? A: Yes, PA83 can apply to both hardware and software components of a technical solution.

  10. Q: Where can I find the latest version of PA83? A: The official website of the organization responsible for PA83 should have the most up-to-date version available for download.

Please note that the specific details of PA83 may vary depending on the context and industry.