Cree/Wolfspeed
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
C4D10120H
Lihat Butiran Helaian data

C4D10120H Product Overview

Introduction

C4D10120H is a high-power, fast-switching Schottky diode designed for various electronic applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor/Electronic Component
  • Use: Fast-switching diode for high-power applications
  • Characteristics: High power handling, fast switching speed, low forward voltage drop
  • Package: TO-220AB
  • Essence: High-power rectification and freewheeling diode
  • Packaging/Quantity: Typically available in reels or tubes, quantity varies by manufacturer

Specifications

  • Voltage Rating: 120V
  • Current Rating: 10A
  • Forward Voltage Drop: 0.65V at 5A
  • Reverse Recovery Time: <100ns
  • Operating Temperature Range: -55°C to 175°C
  • Storage Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The C4D10120H follows the standard TO-220AB pin configuration: - Pin 1: Anode - Pin 2: Cathode - Pin 3: Not connected (tab for heat dissipation)

Functional Features

  • High Power Handling: Capable of handling high current and voltage levels
  • Fast Switching Speed: Enables rapid transitions between conducting and non-conducting states
  • Low Forward Voltage Drop: Minimizes power loss during conduction

Advantages and Disadvantages

Advantages

  • High power handling capability
  • Fast switching speed
  • Low forward voltage drop
  • Robust construction for reliability in demanding applications

Disadvantages

  • Higher cost compared to standard diodes
  • Larger physical footprint due to high-power handling requirements

Working Principles

The C4D10120H operates based on the Schottky diode principle, utilizing a metal-semiconductor junction to enable fast switching and low forward voltage drop. When a forward bias is applied, the diode conducts with minimal voltage drop, making it suitable for high-efficiency applications.

Detailed Application Field Plans

The C4D10120H finds extensive use in the following applications: - Switch-mode power supplies - Motor drives - Solar inverters - Welding equipment - Power factor correction circuits

Detailed and Complete Alternative Models

  • C4D10120: Lower voltage rating variant
  • C4D20120H: Higher current rating variant
  • C4D10120F: Fast recovery diode alternative

In conclusion, the C4D10120H serves as a reliable and efficient high-power Schottky diode suitable for various demanding electronic applications, offering fast switching speed, high power handling, and low forward voltage drop.

Word Count: 410

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi C4D10120H dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of C4D10120H in technical solutions:

  1. What is C4D10120H?

    • C4D10120H is a high-power Schottky rectifier diode designed for use in high-frequency applications.

  2. What are the key features of C4D10120H?

    • The key features of C4D10120H include low forward voltage drop, high frequency operation, and high junction temperature capability.

  3. What are the typical applications of C4D10120H?

    • C4D10120H is commonly used in switch-mode power supplies, freewheeling diodes, and reverse battery protection.

  4. What is the maximum forward voltage of C4D10120H?

    • The maximum forward voltage of C4D10120H is typically around 0.65V at a forward current of 10A.

  5. What is the maximum reverse voltage of C4D10120H?

    • The maximum reverse voltage of C4D10120H is 120V.

  6. What is the operating temperature range of C4D10120H?

    • C4D10120H can operate within a temperature range of -55°C to +175°C.

  7. How does C4D10120H perform in high-frequency applications?

    • C4D10120H is specifically designed for high-frequency operation, offering fast switching and low recovery time.

  8. Can C4D10120H be used in automotive applications?

    • Yes, C4D10120H is suitable for automotive applications such as electronic control units and LED lighting.

  9. Does C4D10120H require a heatsink for operation?

    • The need for a heatsink depends on the specific application and operating conditions, but C4D10120H has a high junction temperature capability.

  10. Is C4D10120H RoHS compliant?

    • Yes, C4D10120H is RoHS compliant, making it suitable for use in environmentally sensitive applications.

I hope these questions and answers are helpful! Let me know if you need further assistance.