BAS7004TC
Product Overview
Category: Diode
Use: Rectification and signal processing
Characteristics: High efficiency, low forward voltage drop
Package: SOD-323
Essence: Schottky diode
Packaging/Quantity: Tape & Reel, 3000 units
Specifications
- Forward Voltage Drop: 0.32V at 1A
- Reverse Voltage: 70V
- Forward Current: 70mA
- Operating Temperature Range: -65°C to +125°C
Detailed Pin Configuration
The BAS7004TC is a SOD-323 packaged diode with two pins. The anode is connected to pin 1, and the cathode is connected to pin 2.
Functional Features
- High switching speed
- Low leakage current
- Small package size
Advantages and Disadvantages
Advantages: - High efficiency - Fast switching speed - Low forward voltage drop
Disadvantages: - Limited reverse voltage capability - Sensitivity to overvoltage conditions
Working Principles
The BAS7004TC operates based on the Schottky barrier principle, which allows for fast switching and low forward voltage drop due to the metal-semiconductor junction.
Detailed Application Field Plans
The BAS7004TC is commonly used in: - Power supplies - Signal clamping circuits - Reverse polarity protection circuits - Low voltage rectifiers
Detailed and Complete Alternative Models
- 1N5817: Similar characteristics, higher reverse voltage capability
- BAT54S: Dual diode configuration, suitable for differential signal processing
This comprehensive entry provides detailed information about the BAS7004TC diode, including its product overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi BAS7004TC dalam penyelesaian teknikal
Sure, here are 10 common questions and answers related to the application of BAS7004TC in technical solutions:
Q: What is BAS7004TC? A: BAS7004TC is a Schottky barrier diode designed for high-speed switching applications.
Q: What are the key features of BAS7004TC? A: BAS7004TC features low forward voltage drop, fast switching speed, and low reverse leakage current.
Q: What are the typical applications of BAS7004TC? A: BAS7004TC is commonly used in power supply circuits, voltage clamping circuits, and high-frequency rectification.
Q: What is the maximum forward voltage of BAS7004TC? A: The maximum forward voltage of BAS7004TC is typically around 0.45V at a forward current of 70mA.
Q: What is the maximum reverse voltage of BAS7004TC? A: The maximum reverse voltage of BAS7004TC is typically around 70V.
Q: Can BAS7004TC be used in high-frequency applications? A: Yes, BAS7004TC is suitable for high-frequency applications due to its fast switching speed.
Q: Is BAS7004TC suitable for low-power applications? A: Yes, BAS7004TC is suitable for low-power applications due to its low forward voltage drop.
Q: What is the operating temperature range of BAS7004TC? A: BAS7004TC is typically rated for operation within the temperature range of -65°C to 125°C.
Q: Does BAS7004TC require a heat sink for thermal management? A: In most applications, BAS7004TC does not require a heat sink due to its low power dissipation.
Q: Are there any specific layout considerations when using BAS7004TC in a circuit? A: It is recommended to minimize the length of the traces connected to BAS7004TC to reduce parasitic inductance and ensure optimal performance.
I hope these questions and answers provide the information you were looking for! If you have any more specific questions, feel free to ask.