PI49FCT3805AQEX

Overview

• Category: Integrated Circuit
• Use: Signal Buffer/Driver
• Characteristics: High-speed, Low-power, TTL-compatible
• Package: 20-pin QSOP
• Essence: Buffer and driver for signal amplification and transmission
• Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications and Parameters

• Supply Voltage: 3.3V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Operating Temperature Range: -40°C to +85°C
• Propagation Delay Time: 2.5ns (typical)
• Output Current: ±24mA
• Input Capacitance: 4pF (typical)
• Output Capacitance: 6pF (typical)

Pin Configuration

1. GND
2. A1
3. B1
4. Y1
5. A2
6. B2
7. Y2
8. A3
9. B3
10. Y3
11. A4
12. B4
13. Y4
14. A5
15. B5
16. Y5
17. VCC
18. OE#
19. GND
20. NC

Functional Characteristics

• The PI49FCT3805AQEX is a 5-bit buffer/driver with TTL-compatible inputs and outputs.
• It provides high-speed signal amplification and transmission capabilities.
• The device operates at a low power supply voltage of 3.3V.
• The output current capability allows driving capacitive loads with ease.
• The OE# pin enables the device to be enabled or disabled, providing flexibility in controlling the output.

Advantages and Disadvantages

Advantages: - High-speed operation - Low-power consumption - TTL-compatible inputs and outputs - Wide operating temperature range

Disadvantages: - Limited output current capability - Only supports 5-bit buffering/driving

Applicable Range of Products

The PI49FCT3805AQEX is suitable for various applications that require signal buffering and driving, such as:

• Communication systems
• Data transmission equipment
• Industrial automation
• Test and measurement instruments
• Consumer electronics

Working Principles

The PI49FCT3805AQEX operates by receiving input signals on the A1-A5 pins and amplifying them to the corresponding Y1-Y5 output pins. The device ensures compatibility with TTL logic levels and provides a low impedance drive to the load.

Detailed Application Field Plans

1. Communication Systems: The PI49FCT3805AQEX can be used in communication systems to amplify and transmit signals between different modules or devices.
2. Data Transmission Equipment: It is suitable for use in data transmission equipment to ensure reliable signal integrity during high-speed data transfer.
3. Industrial Automation: The device can be employed in industrial automation systems to buffer and drive signals between sensors, actuators, and control units.
4. Test and Measurement Instruments: It finds application in test and measurement instruments where accurate signal amplification and transmission are crucial for precise measurements.
5. Consumer Electronics: The PI49FCT3805AQEX can be utilized in various consumer electronic devices, including audio/video equipment, gaming consoles, and computer peripherals.

Detailed Alternative Models

1. PI49FCT3804AQEX: 4-bit buffer/driver with similar characteristics and package.
2. PI49FCT3806AQEX: 6-bit buffer/driver with similar characteristics and package.
3. PI49FCT3808AQEX: 8-bit buffer/driver with similar characteristics and package.
4. PI49FCT3810AQEX: 10-bit buffer/driver with similar characteristics and package.
5. PI49FCT3812AQEX: 12-bit buffer/driver with similar characteristics and package.

5 Common Technical Questions and Answers

1. Q: What is the maximum operating frequency of the PI49FCT3805AQEX? A: The device can operate at frequencies up to 200MHz.

2. Q: Can I use the PI49FCT3805AQEX with a 5V power supply? A: No, the device is designed for a 3.3V power supply. Using a higher voltage may damage the IC.

3. Q: Is the PI49FCT3805AQEX compatible with CMOS logic levels? A: No, the device is specifically designed for TTL-compatible inputs and outputs.

4. Q: Can I connect multiple PI49FCT3805AQEX devices in parallel to increase the number of buffered/driver bits? A: Yes, multiple devices can be connected in parallel to achieve a higher bit count.

5.