PI6CX224DEDR

Basic Information Overview

Category: Integrated Circuit (IC)
Use: Signal Switching and Routing
Characteristics: High-speed, Low-power consumption
Package: DIP-16 (Dual In-line Package with 16 pins)
Essence: Digital Multiplexer
Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

Supply Voltage: 3.3V
Input Voltage Range: 0V to VCC
Operating Temperature Range: -40°C to +85°C
On-state Resistance: 4Ω (typical)
Bandwidth: 1GHz (typical)

Detailed and Complete Pin Configuration

IN0: Input 0
IN1: Input 1
IN2: Input 2
IN3: Input 3
EN: Enable Input
S0: Selection Input 0
S1: Selection Input 1
GND: Ground
OUT: Output
VCC: Supply Voltage
NC: No Connection
NC: No Connection
NC: No Connection
NC: No Connection
NC: No Connection
NC: No Connection

Functional Characteristics

The PI6CX224DEDR is a digital multiplexer that allows the selection of one out of four input signals based on the control inputs.
It operates at high speed and consumes low power, making it suitable for various applications.
The enable input (EN) controls the operation of the multiplexer.
The selection inputs (S0 and S1) determine which input signal is routed to the output.

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient signal switching. - Low-power consumption reduces energy usage. - Compact DIP-16 package allows for easy integration into circuit designs.

Disadvantages: - Limited to selecting one out of four input signals. - May require additional components for complex routing configurations.

Applicable Range of Products

The PI6CX224DEDR is commonly used in electronic systems that require signal switching and routing, such as: - Communication equipment - Data acquisition systems - Test and measurement instruments - Audio and video devices

Working Principles

The PI6CX224DEDR utilizes digital logic to route the selected input signal to the output based on the control inputs. When the enable input (EN) is active, the selection inputs (S0 and S1) determine which input signal is connected to the output pin.

Detailed Application Field Plans

Communication Equipment: The PI6CX224DEDR can be used to switch between different communication channels, allowing for efficient data transmission.
Data Acquisition Systems: It enables the selection of specific sensor inputs, facilitating accurate data collection.
Test and Measurement Instruments: The multiplexer can be utilized to route various test signals to different measurement modules, enhancing testing capabilities.
Audio and Video Devices: It enables the selection of different audio or video sources, providing flexibility in multimedia applications.

Detailed Alternative Models

PI6C224DEDR: Similar functionality with a different pin configuration.
PI6CX324DEDR: 4-to-1 digital multiplexer with enhanced bandwidth.

5 Common Technical Questions and Answers

Q: What is the maximum operating temperature of the PI6CX224DEDR? A: The PI6CX224DEDR can operate within a temperature range of -40°C to +85°C.
Q: Can I use the PI6CX224DEDR with a supply voltage higher than 3.3V? A: No, the PI6CX224DEDR is designed to operate with a maximum supply voltage of 3.3V.
Q: How many input signals can the PI6CX224DEDR select from? A: The PI6CX224DEDR can select one out of four input signals.
Q: What is the typical on-state resistance of the PI6CX224DEDR? A: The typical on-state resistance of the PI6CX224DEDR is 4Ω.
Q: What is the bandwidth of the PI6CX224DEDR? A: The PI6CX224DEDR has a typical bandwidth of 1GHz.

[Word count: 534]