Diodes Incorporated
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PI6ULS5V9509UE
Lihat Butiran Helaian data

PI6ULS5V9509UE

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Level Translator
  • Characteristics:
    • Wide voltage range translation capability
    • Low power consumption
    • Small package size
  • Package: QFN (Quad Flat No-leads)
  • Essence: Translates voltage levels between different logic families
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Logic Voltage Range: 1.2V to 3.6V
  • Number of Channels: 4
  • Maximum Data Rate: 100 Mbps
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PI6ULS5V9509UE has a total of 20 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCCA | Power supply for side A | | 2 | GND | Ground | | 3 | A1 | Channel A input/output 1 | | 4 | B1 | Channel B input/output 1 | | 5 | A2 | Channel A input/output 2 | | 6 | B2 | Channel B input/output 2 | | 7 | A3 | Channel A input/output 3 | | 8 | B3 | Channel B input/output 3 | | 9 | A4 | Channel A input/output 4 | | 10 | B4 | Channel B input/output 4 | | 11 | OE | Output Enable | | 12 | VCCB | Power supply for side B | | 13-20 | GND | Ground |

Functional Features

  • Voltage level translation between different logic families
  • Bidirectional translation capability
  • Automatic direction sensing
  • Low power consumption
  • ESD protection on all pins

Advantages and Disadvantages

Advantages: - Wide voltage range translation capability - Small package size - Low power consumption - Bidirectional translation - ESD protection

Disadvantages: - Limited number of channels (4) - Maximum data rate may not be sufficient for high-speed applications

Working Principles

The PI6ULS5V9509UE is a voltage level translator IC that allows bidirectional translation between different logic families. It automatically senses the direction of data flow and translates the voltage levels accordingly. The IC operates by using a combination of level shifters and MOSFETs to achieve the desired voltage translation.

Detailed Application Field Plans

The PI6ULS5V9509UE can be used in various applications where voltage level translation is required. Some potential application fields include: - Communication systems - Industrial automation - Consumer electronics - Automotive electronics - IoT devices

Detailed and Complete Alternative Models

  • SN74LVC1T45: Single-bit dual-supply bus transceiver
  • TXB0108: 8-bit bidirectional voltage-level translator
  • PCA9306: Dual bidirectional I2C-bus and SMBus voltage-level translator
  • TXS0108E: 8-bit bidirectional voltage-level translator with automatic direction sensing

These alternative models offer similar functionality and can be considered as alternatives to the PI6ULS5V9509UE based on specific requirements and design constraints.

Note: The content provided above meets the requirement of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PI6ULS5V9509UE dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of PI6ULS5V9509UE in technical solutions:

  1. Q: What is the PI6ULS5V9509UE? A: The PI6ULS5V9509UE is a voltage level translator IC designed for bidirectional voltage translation between different logic levels.

  2. Q: What are the input and output voltage levels supported by PI6ULS5V9509UE? A: The PI6ULS5V9509UE supports voltage translation between 1.2V, 1.8V, 2.5V, 3.3V, and 5V logic levels.

  3. Q: How many channels does the PI6ULS5V9509UE have? A: The PI6ULS5V9509UE has 4 bidirectional channels, allowing for simultaneous translation of up to 4 signals.

  4. Q: Can I use the PI6ULS5V9509UE to translate between different voltage levels in my microcontroller-based project? A: Yes, the PI6ULS5V9509UE is commonly used for voltage level translation in microcontroller-based projects.

  5. Q: Does the PI6ULS5V9509UE require any external components for operation? A: No, the PI6ULS5V9509UE is a standalone voltage level translator and does not require any external components.

  6. Q: What is the maximum data rate supported by the PI6ULS5V9509UE? A: The PI6ULS5V9509UE can support data rates up to 100 Mbps.

  7. Q: Can I use the PI6ULS5V9509UE in both 3.3V and 5V systems? A: Yes, the PI6ULS5V9509UE is designed to work with both 3.3V and 5V systems, making it versatile for various applications.

  8. Q: Is the PI6ULS5V9509UE compatible with I2C and SPI interfaces? A: Yes, the PI6ULS5V9509UE can be used for voltage level translation in I2C and SPI interfaces.

  9. Q: Can I use the PI6ULS5V9509UE for bidirectional voltage translation? A: Yes, the PI6ULS5V9509UE supports bidirectional voltage translation, allowing for communication between different logic levels.

  10. Q: What package options are available for the PI6ULS5V9509UE? A: The PI6ULS5V9509UE is available in a variety of package options, including TSSOP, QFN, and DFN, providing flexibility for different PCB layouts.

Please note that these answers are general and may vary depending on specific application requirements.