Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ZXCT1083E5TA

ZXCT1083E5TA

Product Overview

Category

ZXCT1083E5TA belongs to the category of integrated circuits (ICs).

Use

This product is commonly used for current sensing and monitoring applications.

Characteristics

  • High accuracy
  • Low power consumption
  • Wide input voltage range
  • Small package size

Package

The ZXCT1083E5TA is available in a small SOT23-5 package.

Essence

The essence of this product lies in its ability to accurately measure and monitor current flow in various electronic systems.

Packaging/Quantity

The ZXCT1083E5TA is typically packaged in reels, with each reel containing 3000 units.

Specifications

  • Input Voltage Range: 2.7V to 40V
  • Output Voltage Range: 0V to Vcc
  • Quiescent Current: 60µA (typical)
  • Accuracy: ±1% (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The ZXCT1083E5TA has five pins arranged as follows:

```


| | --| |-- |____| ```

Pin 1: Current Sense Input
Pin 2: Ground
Pin 3: Output
Pin 4: Positive Supply
Pin 5: Enable/Shutdown

Functional Features

  • Accurate current sensing
  • Low power consumption
  • Wide input voltage range
  • Shutdown mode for power saving
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • High accuracy in current measurement
  • Wide operating voltage range
  • Small package size for space-constrained applications
  • Low power consumption

Disadvantages

  • Limited output voltage range
  • Requires external components for precise calibration

Working Principles

The ZXCT1083E5TA utilizes a precision current-sensing resistor and an internal amplifier to measure the voltage drop across the resistor. This voltage is then amplified and converted into a proportional output voltage. The device operates based on the principle of Ohm's Law, where the voltage across a resistor is directly proportional to the current flowing through it.

Detailed Application Field Plans

The ZXCT1083E5TA finds applications in various fields, including:

  1. Power management systems
  2. Battery charging circuits
  3. Motor control systems
  4. Overcurrent protection circuits
  5. Energy monitoring systems

Detailed and Complete Alternative Models

  1. ZXCT1083E6TA: Similar specifications but with higher accuracy (+/- 0.5%)
  2. ZXCT1083E4TA: Similar specifications but with lower power consumption
  3. ZXCT1083E8TA: Similar specifications but with wider input voltage range (up to 60V)

These alternative models provide options for different requirements and performance levels.

Word count: 380 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ZXCT1083E5TA dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ZXCT1083E5TA in technical solutions:

  1. Question: What is the ZXCT1083E5TA?
    Answer: The ZXCT1083E5TA is a high-side current sense amplifier designed for use in various technical solutions.

  2. Question: What is the purpose of the ZXCT1083E5TA?
    Answer: The purpose of the ZXCT1083E5TA is to accurately measure current flowing through a high-side shunt resistor in a circuit.

  3. Question: What is the voltage range supported by the ZXCT1083E5TA?
    Answer: The ZXCT1083E5TA supports a wide voltage range from 2.7V to 28V, making it suitable for a variety of applications.

  4. Question: How accurate is the current measurement provided by the ZXCT1083E5TA?
    Answer: The ZXCT1083E5TA offers a high accuracy of typically ±0.5% over the full temperature range.

  5. Question: Can the ZXCT1083E5TA handle high currents?
    Answer: Yes, the ZXCT1083E5TA can handle high currents up to 3A, making it suitable for a wide range of applications.

  6. Question: Does the ZXCT1083E5TA require an external power supply?
    Answer: No, the ZXCT1083E5TA is powered directly from the measured current, eliminating the need for an external power supply.

  7. Question: Is the ZXCT1083E5TA compatible with different communication interfaces?
    Answer: Yes, the ZXCT1083E5TA supports both I2C and SMBus interfaces, allowing for easy integration into various systems.

  8. Question: Can the ZXCT1083E5TA be used in automotive applications?
    Answer: Yes, the ZXCT1083E5TA is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability.

  9. Question: Does the ZXCT1083E5TA provide any fault detection features?
    Answer: Yes, the ZXCT1083E5TA includes a fault output pin that can be used to detect overcurrent or undervoltage conditions.

  10. Question: What is the package type of the ZXCT1083E5TA?
    Answer: The ZXCT1083E5TA is available in a compact SOT23-5 package, which is easy to solder and integrate into circuit designs.

Please note that these questions and answers are general and may vary depending on specific application requirements.