ZXRE4041EFTC
Product Overview
Category
ZXRE4041EFTC belongs to the category of voltage references.
Use
It is primarily used as a precision voltage reference in various electronic circuits.
Characteristics
- High accuracy and stability
- Low temperature coefficient
- Low output noise
- Wide operating temperature range
Package
ZXRE4041EFTC is available in a small surface mount package, typically SOT-23.
Essence
The essence of ZXRE4041EFTC lies in its ability to provide a precise and stable voltage reference for accurate circuit operation.
Packaging/Quantity
It is commonly packaged in reels or tubes, with a typical quantity of 3000 units per reel.
Specifications
- Output Voltage: 4.096V
- Initial Accuracy: ±0.1%
- Temperature Coefficient: ±10ppm/°C
- Supply Voltage Range: 2.7V to 5.5V
- Output Current: 10mA (maximum)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
ZXRE4041EFTC has three pins:
- VOUT: Output voltage pin
- GND: Ground pin
- VIN: Input voltage pin
Functional Features
- High precision voltage reference
- Low power consumption
- Excellent line and load regulation
- Short-circuit protection
- Thermal shutdown protection
Advantages
- High accuracy and stability ensure reliable circuit performance.
- Low temperature coefficient minimizes voltage variations with temperature changes.
- Low output noise reduces interference in sensitive applications.
- Wide operating temperature range allows usage in extreme environments.
Disadvantages
- Limited output current may restrict its use in high-power applications.
- Availability in only surface mount package may limit compatibility with certain circuit designs.
Working Principles
ZXRE4041EFTC utilizes a bandgap voltage reference circuit to generate a precise and stable output voltage. It compensates for temperature variations by employing a temperature-dependent current source and a voltage divider network.
Detailed Application Field Plans
ZXRE4041EFTC finds applications in various fields, including:
- Precision measurement instruments
- Data acquisition systems
- Industrial control systems
- Medical devices
- Automotive electronics
- Communication equipment
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to ZXRE4041EFTC are:
- LT6654-4.096V: A precision voltage reference with similar specifications.
- MAX6190: Low-power, low-noise voltage reference suitable for battery-powered applications.
- REF102: High-precision, low-drift voltage reference with excellent long-term stability.
These alternative models offer similar functionality and can be used as substitutes based on specific requirements.
Word count: 314 words
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ZXRE4041EFTC dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of ZXRE4041EFTC in technical solutions:
Q1: What is ZXRE4041EFTC? A1: ZXRE4041EFTC is a voltage reference IC (integrated circuit) that provides a stable and accurate voltage reference for various technical applications.
Q2: What is the voltage range supported by ZXRE4041EFTC? A2: ZXRE4041EFTC supports a voltage range from 1.225V to 5.0V.
Q3: What is the typical output voltage accuracy of ZXRE4041EFTC? A3: The typical output voltage accuracy of ZXRE4041EFTC is ±0.4%.
Q4: Can ZXRE4041EFTC be used in battery-powered devices? A4: Yes, ZXRE4041EFTC can be used in battery-powered devices as it has low power consumption.
Q5: Is ZXRE4041EFTC suitable for precision measurement applications? A5: Yes, ZXRE4041EFTC is suitable for precision measurement applications due to its high accuracy and low temperature coefficient.
Q6: Does ZXRE4041EFTC require external components for operation? A6: No, ZXRE4041EFTC does not require any external components for basic operation. However, additional components may be needed for specific applications.
Q7: Can ZXRE4041EFTC handle high current loads? A7: No, ZXRE4041EFTC is designed for low current applications and cannot handle high current loads.
Q8: What is the operating temperature range of ZXRE4041EFTC? A8: The operating temperature range of ZXRE4041EFTC is typically -40°C to +125°C.
Q9: Can ZXRE4041EFTC be used in automotive applications? A9: Yes, ZXRE4041EFTC is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.
Q10: Are there any recommended PCB layout guidelines for using ZXRE4041EFTC? A10: Yes, it is recommended to follow the manufacturer's PCB layout guidelines to ensure proper performance and minimize noise interference.
Please note that these answers are general and may vary depending on specific application requirements.