Eaton
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
FL11K3
Lihat Butiran Helaian data

FL11K3 Product Overview

Introduction

FL11K3 is a versatile electronic component that belongs to the category of infrared receivers. This product is widely used in various applications such as remote controls, security systems, and automation devices due to its unique characteristics and reliable performance.

Basic Information Overview

  • Category: Infrared Receiver
  • Use: Remote controls, security systems, automation devices
  • Characteristics: High sensitivity, wide operating angle, low power consumption
  • Package: Miniature package
  • Essence: Infrared signal reception
  • Packaging/Quantity: Typically available in reels of 1000 units

Specifications

  • Operating Voltage: 2.7V to 5.5V
  • Carrier Frequency: 38kHz
  • Operating Temperature: -25°C to 85°C
  • Output Type: Digital Output
  • Dimensions: 3mm x 3mm x 1.6mm

Detailed Pin Configuration

The FL11K3 features a standard pin configuration with three pins: 1. VCC (Power Supply) 2. GND (Ground) 3. OUT (Digital Output)

Functional Features

  • High Sensitivity: Capable of receiving weak infrared signals over a wide range.
  • Wide Operating Angle: Provides reliable signal reception within a broad angle range.
  • Low Power Consumption: Ensures energy-efficient operation for prolonged use.

Advantages and Disadvantages

Advantages

  • Reliable Performance: Ensures consistent signal reception in various environments.
  • Compact Design: Miniature package allows for easy integration into small-scale electronic devices.
  • Energy-Efficient: Low power consumption extends battery life in portable applications.

Disadvantages

  • Limited Range: May exhibit reduced performance at extended distances from the transmitter.
  • Susceptible to Interference: External sources of infrared radiation can affect signal reception.

Working Principles

The FL11K3 operates based on the principle of detecting modulated infrared signals emitted by a compatible transmitter. Upon receiving the infrared signal, the device processes it and provides a digital output corresponding to the received signal.

Detailed Application Field Plans

  1. Remote Controls: FL11K3 is commonly used in remote control devices for consumer electronics such as televisions, air conditioners, and audio systems.
  2. Security Systems: Integrated into motion sensors and alarm systems to detect infrared signatures associated with human presence.
  3. Automation Devices: Utilized in smart home automation systems for controlling lighting, climate control, and entertainment systems.

Detailed and Complete Alternative Models

  • FL11K4: Similar infrared receiver with enhanced sensitivity and extended operating range.
  • FL11K5: Compact infrared receiver designed for space-constrained applications with moderate performance requirements.

In conclusion, FL11K3 is a reliable and versatile infrared receiver that finds widespread use in various electronic applications. Its high sensitivity, wide operating angle, and low power consumption make it an ideal choice for designers seeking dependable infrared reception capabilities.

Word Count: 498

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi FL11K3 dalam penyelesaian teknikal

  1. What is FL11K3?

    • FL11K3 is a high-performance polymer compound used in various technical solutions for its excellent mechanical and thermal properties.

  2. What are the key characteristics of FL11K3?

    • FL11K3 exhibits high tensile strength, good chemical resistance, and excellent heat stability, making it suitable for demanding technical applications.

  3. In what technical solutions can FL11K3 be used?

    • FL11K3 is commonly used in automotive components, electrical insulation, industrial machinery parts, and aerospace applications due to its robust nature.

  4. How does FL11K3 perform under extreme temperatures?

    • FL11K3 maintains its mechanical integrity and dimensional stability at both high and low temperatures, making it ideal for applications that experience temperature fluctuations.

  5. Is FL11K3 resistant to chemicals and solvents?

    • Yes, FL11K3 demonstrates good resistance to a wide range of chemicals and solvents, enhancing its suitability for use in harsh environments.

  6. Can FL11K3 be easily machined or molded into specific shapes?

    • FL11K3 can be machined and molded with relative ease, allowing for the production of custom components and parts tailored to specific technical requirements.

  7. What are the typical industry standards or certifications associated with FL11K3?

    • FL11K3 may conform to industry standards such as ASTM or ISO, and it may also hold certifications for specific applications, ensuring its quality and reliability.

  8. Does FL11K3 have any limitations or compatibility concerns with other materials?

    • While FL11K3 is compatible with many materials, it's important to consider its compatibility with specific substances and environmental conditions to ensure optimal performance.

  9. Are there any special handling or storage requirements for FL11K3?

    • FL11K3 should be stored in a cool, dry environment away from direct sunlight and moisture to maintain its properties and shelf life.

  10. What are some examples of successful technical solutions using FL11K3?

    • Examples include high-temperature gaskets, wear-resistant bearings, insulating components for electrical equipment, and structural parts in aerospace engineering.