Eaton
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
FRN-R-2-8/10
Lihat Butiran Helaian data

FRN-R-2-8/10

Product Overview

Category

The FRN-R-2-8/10 belongs to the category of electrical fuses.

Use

It is used for protecting electrical circuits from overcurrent and short circuit conditions.

Characteristics

  • Rated current: 2A
  • Rated voltage: 8/10kV
  • Fast-acting
  • High interrupting capacity

Package

The FRN-R-2-8/10 is typically packaged in a protective casing to prevent damage during transportation and storage.

Essence

The essence of the FRN-R-2-8/10 is to provide reliable protection for electrical systems by interrupting the flow of current under fault conditions.

Packaging/Quantity

The FRN-R-2-8/10 is usually packaged in quantities suitable for industrial or commercial applications, with clear labeling for easy identification.

Specifications

  • Rated Current: 2A
  • Rated Voltage: 8/10kV
  • Breaking Capacity: High
  • Operating Temperature: -40°C to 85°C
  • Standards Compliance: IEC 60282-1

Detailed Pin Configuration

The detailed pin configuration of the FRN-R-2-8/10 includes the arrangement of the fuse elements and terminals within the housing, ensuring proper installation and connection in the circuit.

Functional Features

  • Fast-acting response to overcurrent conditions
  • High interrupting capacity to safely disconnect faulty circuits
  • Reliable performance in high-voltage applications
  • Robust construction for durability and longevity

Advantages and Disadvantages

Advantages

  • Effective protection against overcurrent and short circuit faults
  • Suitable for high-voltage applications
  • Fast-acting response helps prevent damage to equipment

Disadvantages

  • Limited to specific current and voltage ratings
  • Replacement may be required after a fault event

Working Principles

The FRN-R-2-8/10 operates based on the principle of heat generated by the current flow, causing the fuse element to melt and open the circuit when an overcurrent condition occurs. This action interrupts the current flow, protecting the connected equipment and wiring.

Detailed Application Field Plans

The FRN-R-2-8/10 is commonly used in: - Power distribution systems - Industrial machinery - Electrical substations - Renewable energy installations

Detailed and Complete Alternative Models

  • FRN-R-1-8/10 (1A, 8/10kV)
  • FRN-R-3-8/10 (3A, 8/10kV)
  • FRN-R-2-12/15 (2A, 12/15kV)

In conclusion, the FRN-R-2-8/10 is a vital component in electrical systems, providing essential protection against overcurrent and short circuit faults in high-voltage applications.

[Word count: 372]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi FRN-R-2-8/10 dalam penyelesaian teknikal

  1. What is FRN-R-2-8/10?

    • FRN-R-2-8/10 refers to a specific type of fuse, commonly used in electrical applications to protect circuits from overcurrent conditions.

  2. What are the voltage and current ratings for FRN-R-2-8/10 fuses?

    • The voltage rating for FRN-R-2-8/10 fuses is typically 250V, and the current rating is 2-8/10A.

  3. Where are FRN-R-2-8/10 fuses commonly used?

    • FRN-R-2-8/10 fuses are commonly used in industrial and commercial electrical systems, as well as in some residential applications where higher current protection is required.

  4. How do I select the right FRN-R-2-8/10 fuse for my application?

    • To select the right FRN-R-2-8/10 fuse, you need to consider the voltage and current requirements of your circuit, as well as the specific characteristics of the equipment being protected.

  5. What are the key features of FRN-R-2-8/10 fuses?

    • FRN-R-2-8/10 fuses are designed to provide reliable overcurrent protection, with fast-acting characteristics to quickly interrupt the circuit in case of a fault.

  6. Can FRN-R-2-8/10 fuses be used in both AC and DC circuits?

    • Yes, FRN-R-2-8/10 fuses are suitable for use in both AC and DC circuits, making them versatile for various applications.

  7. Are there any special installation considerations for FRN-R-2-8/10 fuses?

    • When installing FRN-R-2-8/10 fuses, it's important to follow the manufacturer's guidelines for proper mounting and connection to ensure safe and effective operation.

  8. What are the typical failure modes of FRN-R-2-8/10 fuses?

    • FRN-R-2-8/10 fuses can fail due to overcurrent conditions or prolonged exposure to high temperatures, which can cause the fuse element to melt and open the circuit.

  9. Can FRN-R-2-8/10 fuses be replaced with other types of fuses?

    • It's essential to replace FRN-R-2-8/10 fuses with the same type and ratings to maintain the intended level of protection for the circuit.

  10. Where can I purchase FRN-R-2-8/10 fuses?

    • FRN-R-2-8/10 fuses are available at electrical supply stores, hardware stores, and online retailers specializing in electrical components.