Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TR2/6125FA1.25A

TR2/6125FA1.25A

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage, compact size
Package: TO-220, TO-263
Essence: Regulates voltage to a stable level
Packaging/Quantity: Tape & Reel, 1000 units per reel

Specifications

  • Input Voltage: 4.5V to 26V
  • Output Voltage: 1.25V
  • Output Current: 1.25A
  • Dropout Voltage: 0.3V at 1A
  • Line Regulation: 0.05% typical
  • Load Regulation: 0.05% typical
  • Operating Temperature: -40°C to 125°C
  • Thermal Resistance: 50°C/W junction to case

Detailed Pin Configuration

  1. Vin (Input)
  2. Vout (Output)
  3. GND (Ground)

Functional Features

  • Overcurrent Protection
  • Thermal Shutdown
  • Reverse Polarity Protection
  • Short Circuit Protection

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact size

Disadvantages: - Higher dropout voltage compared to some alternatives

Working Principles

The TR2/6125FA1.25A is a linear voltage regulator that uses a feedback loop to maintain a constant output voltage despite changes in the input voltage or load.

Detailed Application Field Plans

  • Power supplies for microcontrollers and other digital ICs
  • Battery-powered devices
  • Industrial control systems

Detailed and Complete Alternative Models

  • LM317
  • LM1117
  • LT1086

This information provides a comprehensive overview of the TR2/6125FA1.25A, including its specifications, features, advantages, and application field plans.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TR2/6125FA1.25A dalam penyelesaian teknikal

  1. What is TR2/6125FA1.25A?

    • TR2/6125FA1.25A is a type of fuse used in electronic circuits to protect against overcurrent.
  2. What are the technical specifications of TR2/6125FA1.25A?

    • TR2/6125FA1.25A is a fast-acting, 1.25A, 125VAC fuse with a 6.1mm x 2.5mm size.
  3. Where can TR2/6125FA1.25A be used in technical solutions?

    • TR2/6125FA1.25A can be used in various technical solutions such as power supplies, control panels, and electronic equipment.
  4. What are the key features of TR2/6125FA1.25A?

    • The key features of TR2/6125FA1.25A include its fast-acting response, high interrupting capacity, and compact size.
  5. How does TR2/6125FA1.25A provide protection in technical solutions?

    • TR2/6125FA1.25A protects technical solutions by quickly breaking the circuit when an overcurrent condition occurs, preventing damage to the equipment.
  6. Are there any specific installation requirements for TR2/6125FA1.25A?

    • TR2/6125FA1.25A should be installed according to the manufacturer's guidelines, ensuring proper voltage and current ratings are observed.
  7. Can TR2/6125FA1.25A be replaced with other types of fuses in technical solutions?

    • It is recommended to replace TR2/6125FA1.25A with a fuse of the same type and rating to maintain the intended level of protection.
  8. What are the common applications where TR2/6125FA1.25A is used?

    • TR2/6125FA1.25A is commonly used in applications such as consumer electronics, industrial machinery, and automotive electronics.
  9. How can one test if TR2/6125FA1.25A is functioning properly in a technical solution?

    • Testing the continuity of TR2/6125FA1.25A using a multimeter can help verify its functionality within the technical solution.
  10. Where can TR2/6125FA1.25A be sourced for use in technical solutions?

    • TR2/6125FA1.25A can be sourced from authorized distributors or directly from the manufacturer for use in technical solutions.