EPCOS (TDK)
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
B72214T2171K105
Lihat Butiran Helaian data

B72214T2171K105

Product Overview

Category

The B72214T2171K105 belongs to the category of ceramic capacitors.

Use

It is commonly used for filtering, bypassing, and coupling applications in electronic circuits.

Characteristics

  • High capacitance
  • Low equivalent series resistance (ESR)
  • Stable performance over a wide temperature range

Package

The B72214T2171K105 is typically available in a surface mount package.

Essence

This capacitor is essential for stabilizing voltage and reducing noise in electronic circuits.

Packaging/Quantity

The B72214T2171K105 is usually packaged in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Capacitance: 170µF
  • Voltage Rating: 10V
  • Tolerance: ±10%
  • Temperature Coefficient: X7R

Detailed Pin Configuration

The B72214T2171K105 has two terminals for connection. The pin configuration is as follows: - Pin 1: Positive terminal - Pin 2: Negative terminal

Functional Features

  • High capacitance allows for effective filtering and decoupling
  • Low ESR ensures minimal power loss and efficient energy transfer
  • Wide temperature range enables reliable performance in diverse operating conditions

Advantages and Disadvantages

Advantages

  • High capacitance for effective noise reduction
  • Low ESR for efficient energy transfer
  • Stable performance over a wide temperature range

Disadvantages

  • Limited voltage rating compared to some other capacitors
  • Tolerance of ±10% may require tighter circuit design considerations

Working Principles

The B72214T2171K105 operates based on the principle of storing and releasing electrical energy in response to changes in voltage within an electronic circuit. It stabilizes voltage levels and reduces noise by filtering out unwanted signals.

Detailed Application Field Plans

The B72214T2171K105 is widely used in various electronic devices and systems, including: - Power supplies - Audio amplifiers - Signal processing circuits - Communication equipment

Detailed and Complete Alternative Models

Some alternative models to the B72214T2171K105 include: - B72500T0170K062: Similar capacitance and voltage rating - C0805C475K8PACTU: Different package size but comparable characteristics - GRM188R71H104KA93D: Higher voltage rating with similar capacitance

Note: The alternative models listed above are for reference purposes and may vary based on specific application requirements.

This entry provides a comprehensive overview of the B72214T2171K105 ceramic capacitor, covering its basic information, specifications, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi B72214T2171K105 dalam penyelesaian teknikal

  1. What is the B72214T2171K105 component used for in technical solutions?

    • The B72214T2171K105 is a ceramic transient voltage suppressor (TVS) diode that is commonly used to protect sensitive electronic components from voltage spikes and transients.

  2. What are the key specifications of the B72214T2171K105?

    • The B72214T2171K105 has a working voltage of 85V, a clamping voltage of 150V, and a peak pulse current of 100A.

  3. How does the B72214T2171K105 protect electronic circuits?

    • The B72214T2171K105 diverts excessive voltage away from sensitive components by providing a low-impedance path to ground during transient events.

  4. In what applications is the B72214T2171K105 commonly used?

    • This component is often used in power supplies, communication equipment, automotive electronics, and industrial control systems to safeguard against voltage surges.

  5. What are the advantages of using the B72214T2171K105 in technical solutions?

    • The B72214T2171K105 offers fast response times, high surge handling capabilities, and compact size, making it an effective solution for protecting electronic circuits.

  6. How should the B72214T2171K105 be integrated into a circuit?

    • The B72214T2171K105 should be placed in parallel with the protected circuit, ensuring that it can quickly shunt excess energy away from sensitive components.

  7. What are the temperature and environmental considerations for the B72214T2171K105?

    • The B72214T2171K105 operates within a wide temperature range and is suitable for various environmental conditions, making it versatile for different applications.

  8. Are there any limitations or precautions when using the B72214T2171K105?

    • It's important to ensure that the B72214T2171K105 is properly rated for the expected surge levels and to follow manufacturer guidelines for proper installation.

  9. Can the B72214T2171K105 be used for both AC and DC applications?

    • Yes, the B72214T2171K105 is suitable for both AC and DC circuits, providing protection against transient overvoltages in various scenarios.

  10. Where can I find detailed technical information and application notes for the B72214T2171K105?

    • Detailed technical information and application notes for the B72214T2171K105 can be found on the manufacturer's website or in the product datasheet.