EPCOS (TDK)
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
B72580E0350K062
Lihat Butiran Helaian data

B72580E0350K062

Product Overview

Category

The B72580E0350K062 belongs to the category of varistors, which are electronic components used to protect circuits from excessive voltage.

Use

This varistor is commonly used in electronic circuits to suppress voltage spikes and transient surges, thereby safeguarding sensitive components from damage.

Characteristics

  • Voltage Rating: 35V
  • Nominal Discharge Current: 10kA
  • Package Type: Disc
  • Essence: Protection against voltage transients
  • Packaging/Quantity: Typically supplied in reels or bulk packaging

Specifications

The B72580E0350K062 varistor has the following specifications: - Maximum Allowable Voltage: 56V - Clamping Voltage: 90V - Energy Absorption: 0.3J - Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The varistor has two terminals for connection to the circuit. The pin configuration is as follows: - Terminal 1: Anode - Terminal 2: Cathode

Functional Features

  • Transient Voltage Suppression: Effectively clamps excessive voltage to protect downstream components.
  • Fast Response Time: Rapidly responds to voltage spikes to prevent damage.
  • Reliable Performance: Provides consistent protection over multiple surge events.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • Wide operating temperature range

Disadvantages

  • Limited energy absorption capacity
  • Requires careful consideration of placement in the circuit for optimal performance

Working Principles

When a voltage spike occurs, the varistor conducts current, diverting the excess energy away from the protected circuit. This action effectively limits the voltage across the circuit, preventing damage to sensitive components.

Detailed Application Field Plans

The B72580E0350K062 varistor finds application in various electronic systems, including: - Power supplies - Telecommunication equipment - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative varistors with similar characteristics include: - B72580T0350K062 - B72580E0300K062 - B72580D0350K062

In conclusion, the B72580E0350K062 varistor offers reliable protection against voltage transients and finds widespread use in diverse electronic applications.

[Word count: 324]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi B72580E0350K062 dalam penyelesaian teknikal

  1. What is the B72580E0350K062 component used for in technical solutions?

    • The B72580E0350K062 is a common-mode choke filter used to suppress electromagnetic interference in electronic circuits.

  2. How does the B72580E0350K062 help in reducing electromagnetic interference?

    • The B72580E0350K062 acts as a low-pass filter, allowing desired signals to pass through while attenuating unwanted high-frequency noise and interference.

  3. What are the typical applications of the B72580E0350K062 in technical solutions?

    • The B72580E0350K062 is commonly used in power supplies, data communication systems, industrial automation, and automotive electronics to mitigate electromagnetic interference.

  4. What are the key specifications of the B72580E0350K062 that make it suitable for technical solutions?

    • The B72580E0350K062 typically has a high impedance at the frequency range of interest, low insertion loss, and can handle high currents, making it ideal for EMI suppression.

  5. Are there any specific layout considerations when integrating the B72580E0350K062 into a technical solution?

    • It's important to place the B72580E0350K062 close to the source of interference and ensure proper grounding to maximize its effectiveness.

  6. Can the B72580E0350K062 be used in high-temperature environments?

    • Yes, the B72580E0350K062 is designed to operate reliably in a wide temperature range, making it suitable for various industrial and automotive applications.

  7. What are the potential benefits of using the B72580E0350K062 in technical solutions?

    • By effectively suppressing electromagnetic interference, the B72580E0350K062 helps improve the reliability and performance of electronic systems while ensuring compliance with EMC regulations.

  8. Does the B72580E0350K062 require any additional components for proper integration?

    • Typically, the B72580E0350K062 can be integrated directly into the circuit, but it's important to follow the manufacturer's guidelines for optimal performance.

  9. Are there any alternative components that can be used in place of the B72580E0350K062?

    • While there are other common-mode chokes available, the B72580E0350K062 is chosen for its specific electrical characteristics and compatibility with certain technical solutions.

  10. Where can I find detailed technical documentation and application notes for the B72580E0350K062?

    • Detailed technical information, including datasheets and application notes, can be obtained from the manufacturer's website or authorized distributors.