Exar Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XR68C92IVTR-F
Lihat Butiran Helaian data

XR68C92IVTR-F

Product Overview

Category

XR68C92IVTR-F belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for communication and data transfer purposes.

Characteristics

  • High-speed data transmission
  • Low power consumption
  • Compact size
  • Wide operating temperature range

Package

The XR68C92IVTR-F is available in a small outline package (SOP) format.

Essence

The essence of XR68C92IVTR-F lies in its ability to facilitate efficient and reliable communication between electronic devices.

Packaging/Quantity

The XR68C92IVTR-F is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Data transfer rate: Up to 1 Mbps
  • Operating voltage: 3.3V
  • Number of channels: 2
  • Interface type: UART (Universal Asynchronous Receiver Transmitter)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The XR68C92IVTR-F has a total of 28 pins. The pin configuration is as follows:

  1. VCC
  2. GND
  3. TXA
  4. RXA
  5. CTS1
  6. RTS1
  7. DCD1
  8. DSR1
  9. RI1
  10. DTR1
  11. CTS0
  12. RTS0
  13. DCD0
  14. DSR0
  15. RI0
  16. DTR0
  17. TXB
  18. RXB
  19. CTS3
  20. RTS3
  21. DCD3
  22. DSR3
  23. RI3
  24. DTR3
  25. CTS2
  26. RTS2
  27. DCD2
  28. DSR2

Functional Features

  • Dual-channel UART for simultaneous communication
  • Support for various data formats (e.g., 8-bit, 9-bit, or 16-bit)
  • Programmable baud rate generator
  • Automatic hardware flow control
  • Interrupt-driven operation for efficient data handling
  • Built-in FIFO buffers for improved data throughput

Advantages and Disadvantages

Advantages

  • High-speed data transfer capability
  • Low power consumption
  • Compact size for space-constrained applications
  • Wide operating temperature range allows for versatile usage

Disadvantages

  • Limited number of channels (2)
  • Requires external components for complete functionality

Working Principles

The XR68C92IVTR-F operates based on the principles of UART communication. It receives and transmits asynchronous serial data using a specific protocol. The IC converts parallel data into serial format for transmission and vice versa for reception. It incorporates various features to ensure reliable and efficient data transfer.

Detailed Application Field Plans

The XR68C92IVTR-F finds application in various fields, including but not limited to: 1. Telecommunications equipment 2. Industrial automation systems 3. Medical devices 4. Consumer electronics 5. Automotive electronics

Detailed and Complete Alternative Models

  1. XR68C92IVTR-G: Similar to XR68C92IVTR-F with extended operating temperature range (-40°C to +105°C).
  2. XR68C92IVTR-H: Enhanced version with additional features such as increased data transfer rate and expanded channel support.
  3. XR68C92IVTR-J: Low-power variant designed for battery-operated devices.

These alternative models offer similar functionality to XR68C92IVTR-F while catering to specific requirements or preferences.

Note: The content provided above is approximately 400 words. Additional information can be added to meet the required word count of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XR68C92IVTR-F dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XR68C92IVTR-F in technical solutions:

  1. Q: What is XR68C92IVTR-F? A: XR68C92IVTR-F is a UART (Universal Asynchronous Receiver Transmitter) integrated circuit commonly used for serial communication in technical solutions.

  2. Q: What are the key features of XR68C92IVTR-F? A: Some key features of XR68C92IVTR-F include dual-channel operation, programmable baud rate generator, FIFO buffers, and support for various data formats.

  3. Q: How can I interface XR68C92IVTR-F with a microcontroller? A: XR68C92IVTR-F can be interfaced with a microcontroller using standard UART communication protocols such as UART, SPI, or I2C.

  4. Q: Can XR68C92IVTR-F be used in both full-duplex and half-duplex communication modes? A: Yes, XR68C92IVTR-F supports both full-duplex and half-duplex communication modes, allowing bidirectional data transfer.

  5. Q: What is the maximum baud rate supported by XR68C92IVTR-F? A: XR68C92IVTR-F supports baud rates up to 115200 bps, which can be programmed according to the specific requirements of your application.

  6. Q: Does XR68C92IVTR-F have built-in error detection and correction mechanisms? A: Yes, XR68C92IVTR-F includes error detection mechanisms like parity checking and framing error detection to ensure reliable data transmission.

  7. Q: Can XR68C92IVTR-F be used in industrial applications? A: Yes, XR68C92IVTR-F is suitable for industrial applications as it operates in a wide temperature range and has robust features for reliable communication.

  8. Q: How many data bits can XR68C92IVTR-F support? A: XR68C92IVTR-F supports data formats with 5, 6, 7, or 8 data bits, allowing flexibility in transmitting different types of data.

  9. Q: Can XR68C92IVTR-F be used with different voltage levels? A: Yes, XR68C92IVTR-F supports various voltage levels, typically ranging from 3.3V to 5V, making it compatible with a wide range of systems.

  10. Q: Are there any application notes or reference designs available for XR68C92IVTR-F? A: Yes, the manufacturer of XR68C92IVTR-F provides application notes and reference designs that can help you understand and implement the IC in your technical solution.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and datasheet for XR68C92IVTR-F.