Fremont Micro Devices USA
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
FT24C02A-UTG-B
Lihat Butiran Helaian data

FT24C02A-UTG-B

Introduction

The FT24C02A-UTG-B is a crucial component in the field of electronic devices, offering essential storage and retrieval capabilities. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Memory IC
  • Use: Data storage and retrieval in electronic devices
  • Characteristics: Non-volatile, I2C interface, low power consumption
  • Package: 8-pin SOP (Small Outline Package)
  • Essence: Reliable data storage solution for various electronic applications
  • Packaging/Quantity: Available in reels of 3000 units

Specifications

  • Memory Size: 2 Kbits
  • Interface Type: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Protect Pin: Yes
  • Clock Frequency: 400 kHz

Detailed Pin Configuration

The FT24C02A-UTG-B features the following pin configuration: 1. A0: Chip Address Input 2. A1: Chip Address Input 3. A2: Chip Address Input 4. VSS: Ground 5. SDA: Serial Data 6. SCL: Serial Clock 7. WP: Write Protect 8. VCC: Power Supply

Functional Features

  • Non-volatile Storage: Retains data even when power is removed
  • I2C Interface: Enables easy integration with microcontrollers and other devices
  • Low Power Consumption: Ideal for battery-powered applications
  • Write Protection: Prevents accidental modification of stored data

Advantages and Disadvantages

Advantages

  • Reliable non-volatile storage
  • Easy interfacing with I2C protocol
  • Low power consumption
  • Built-in write protection

Disadvantages

  • Limited memory size compared to other options
  • Sensitive to voltage fluctuations

Working Principles

The FT24C02A-UTG-B utilizes I2C communication to store and retrieve data. When connected to a microcontroller or other master device, it responds to read and write commands, allowing seamless integration into various electronic systems. Its non-volatile nature ensures that data remains intact even during power loss.

Detailed Application Field Plans

The FT24C02A-UTG-B finds extensive use in the following applications: - Consumer Electronics: Smartphones, digital cameras, and portable media players - Automotive Systems: Engine control units, infotainment systems - Industrial Automation: Programmable logic controllers, sensor modules - IoT Devices: Smart home appliances, environmental sensors

Detailed and Complete Alternative Models

For users seeking alternatives to the FT24C02A-UTG-B, the following models offer similar functionality: - AT24C02C - CAT24C02 - M24C02 - 24AA02E48

In conclusion, the FT24C02A-UTG-B stands as a reliable and efficient memory IC, catering to diverse electronic applications with its non-volatile storage, I2C interface, and low power consumption. While it may have limitations in memory size and sensitivity to voltage fluctuations, its advantages outweigh these drawbacks, making it a preferred choice for many electronic designs.

Word Count: 498

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi FT24C02A-UTG-B dalam penyelesaian teknikal

  1. What is the FT24C02A-UTG-B?

    • The FT24C02A-UTG-B is a 2Kbit (256 x 8) serial I2C EEPROM with a wide operating voltage range and low power consumption, commonly used for storing configuration data and small amounts of non-volatile memory in technical solutions.

  2. What is the operating voltage range of FT24C02A-UTG-B?

    • The operating voltage range of FT24C02A-UTG-B is typically from 1.7V to 5.5V, making it suitable for a wide range of applications.

  3. What are the typical applications of FT24C02A-UTG-B in technical solutions?

    • FT24C02A-UTG-B is commonly used in applications such as smart meters, IoT devices, industrial control systems, and various other electronic devices requiring non-volatile memory storage.

  4. What is the maximum clock frequency supported by FT24C02A-UTG-B?

    • The maximum clock frequency supported by FT24C02A-UTG-B is 400kHz, allowing for efficient data transfer in I2C communication.

  5. What are the key features of FT24C02A-UTG-B that make it suitable for technical solutions?

    • Some key features include its low power consumption, wide operating voltage range, I2C interface compatibility, and small form factor, making it ideal for space-constrained designs.

  6. How can FT24C02A-UTG-B be interfaced with microcontrollers or other devices?

    • FT24C02A-UTG-B can be easily interfaced with microcontrollers or other devices using the standard I2C protocol, allowing for simple integration into existing designs.

  7. What are the typical write and read cycle times for FT24C02A-UTG-B?

    • The typical write cycle time for FT24C02A-UTG-B is 5ms, while the read cycle time is 1ms, providing fast access to stored data.

  8. Does FT24C02A-UTG-B support software write protection?

    • Yes, FT24C02A-UTG-B supports software write protection, allowing specific memory areas to be locked to prevent accidental modification of critical data.

  9. What are the temperature ranges within which FT24C02A-UTG-B operates reliably?

    • FT24C02A-UTG-B is designed to operate reliably within a temperature range of -40°C to 85°C, making it suitable for both industrial and consumer applications.

  10. Is FT24C02A-UTG-B RoHS compliant?

    • Yes, FT24C02A-UTG-B is RoHS compliant, ensuring that it meets environmental standards for hazardous substance restrictions.