Fremont Micro Devices USA
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
FT24C02A-UTG-T
Lihat Butiran Helaian data

FT24C02A-UTG-T

Introduction

The FT24C02A-UTG-T is a crucial component in the field of electronic devices, offering essential storage and data management capabilities. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Data storage and management
  • Characteristics: High reliability, low power consumption, compact size
  • Package: SOP8 (Small Outline Package 8 pins)
  • Essence: Non-volatile memory storage
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Memory Capacity: 2 Kbits
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The FT24C02A-UTG-T features the following pin configuration: 1. A0: Chip Address Input 2. A1: Chip Address Input 3. A2: Chip Address Input 4. VSS: Ground 5. SDA: Serial Data 6. SCL: Serial Clock 7. WP: Write Protect 8. VCC: Power Supply

Functional Features

  • Non-volatile Memory: Retains stored data even when power is removed
  • I2C Interface: Enables easy integration with microcontrollers and other devices
  • Low Power Consumption: Ideal for battery-powered applications
  • Write Protection: Ensures data integrity by preventing accidental writes

Advantages and Disadvantages

Advantages

  • Reliable data storage
  • Low power consumption
  • Compact form factor
  • Easy integration with I2C interface

Disadvantages

  • Limited write cycle endurance
  • Sensitive to voltage fluctuations

Working Principles

The FT24C02A-UTG-T utilizes electrically erasable programmable read-only memory (EEPROM) technology to store and manage data. It communicates with the host system through the I2C interface, allowing for seamless data transfer and access.

Detailed Application Field Plans

The FT24C02A-UTG-T finds extensive application in various electronic devices, including: - Smartphones and tablets - Wearable devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

For users seeking alternative options, the following models offer similar functionality: - AT24C02 - CAT24C02 - M24C02 - 24AA02

In conclusion, the FT24C02A-UTG-T serves as a reliable and efficient solution for data storage and management in diverse electronic applications, offering high performance and compatibility with industry-standard interfaces.

[Word Count: 443]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi FT24C02A-UTG-T dalam penyelesaian teknikal

  1. What is the FT24C02A-UTG-T?

    • The FT24C02A-UTG-T is a 2Kbit (256 x 8) serial I2C EEPROM with a wide voltage operation range and low power consumption, commonly used for storing configuration data and small amounts of non-volatile memory in technical solutions.

  2. What are the key features of the FT24C02A-UTG-T?

    • The key features include a wide voltage operation range (1.7V to 5.5V), low power consumption, I2C interface, and 2Kbit storage capacity.

  3. How is the FT24C02A-UTG-T typically interfaced with microcontrollers or other devices?

    • The FT24C02A-UTG-T is typically interfaced using the I2C protocol, allowing for easy integration with microcontrollers and other devices.

  4. What are some common technical solutions that utilize the FT24C02A-UTG-T?

    • Common technical solutions include IoT devices, sensor modules, smart meters, and various embedded systems where non-volatile memory storage is required.

  5. What are the typical operating conditions for the FT24C02A-UTG-T?

    • The FT24C02A-UTG-T operates within a temperature range of -40°C to 85°C and can handle a voltage range of 1.7V to 5.5V.

  6. How does the FT24C02A-UTG-T handle data retention and endurance?

    • The FT24C02A-UTG-T offers excellent data retention of up to 200 years and endurance of at least 1 million write cycles.

  7. Can the FT24C02A-UTG-T be used in battery-powered applications?

    • Yes, the FT24C02A-UTG-T's low power consumption makes it suitable for battery-powered applications, extending the device's operational lifespan.

  8. Are there any specific considerations for PCB layout and design when using the FT24C02A-UTG-T?

    • It's important to follow recommended layout guidelines to ensure signal integrity and minimize noise, especially for I2C communication lines.

  9. What are the available package options for the FT24C02A-UTG-T?

    • The FT24C02A-UTG-T is available in various package options, including SOP8, TSSOP8, and USON4.

  10. Where can I find detailed technical documentation and application notes for the FT24C02A-UTG-T?

    • Detailed technical documentation and application notes for the FT24C02A-UTG-T can be found on the manufacturer's website or through authorized distributors.