Fremont Micro Devices USA
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
FT24C04A-UTR-T
Lihat Butiran Helaian data

FT24C04A-UTR-T

Product Overview

Category

The FT24C04A-UTR-T belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is used for non-volatile data storage in various electronic devices, such as consumer electronics, automotive systems, and industrial applications.

Characteristics

  • Non-volatile memory
  • I2C interface
  • Low power consumption
  • High reliability
  • Small form factor

Package

The FT24C04A-UTR-T is available in a compact surface-mount package, typically with 8 pins.

Essence

The essence of this product lies in its ability to store and retrieve data reliably in electronic systems without the need for a constant power supply.

Packaging/Quantity

The FT24C04A-UTR-T is usually packaged in reels or tubes, with quantities varying based on the manufacturer's specifications.

Specifications

  • Memory Capacity: 4 Kbits
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 100 years

Detailed Pin Configuration

The detailed pin configuration of the FT24C04A-UTR-T includes the following pins: 1. A0: Chip address input 2. A1: Chip address input 3. A2: Chip address input 4. VSS: Ground 5. SDA: Serial data input/output 6. SCL: Serial clock input 7. WP: Write protect 8. VCC: Power supply

Functional Features

  • Byte and Page Write Modes
  • Random and Sequential Read Modes
  • Write Protection
  • Software Write Protection
  • Hardware Write Protection

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High reliability
  • Compact form factor
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The FT24C04A-UTR-T operates by using an I2C interface to communicate with the host system. It stores data in a non-volatile manner using floating gate transistors, allowing for reliable data retention even when power is removed.

Detailed Application Field Plans

The FT24C04A-UTR-T is commonly used in the following application fields: - Consumer Electronics: Smartphones, digital cameras, and portable media players - Automotive Systems: Engine control units, infotainment systems, and instrument clusters - Industrial Applications: Programmable logic controllers, sensors, and monitoring systems

Detailed and Complete Alternative Models

Some alternative models to the FT24C04A-UTR-T include: - AT24C04: Similar EEPROM chip with I2C interface - CAT24C04: Competing EEPROM chip with similar characteristics - M24C04: EEPROM chip from a different manufacturer with comparable specifications

In conclusion, the FT24C04A-UTR-T is a versatile EEPROM chip that offers reliable non-volatile data storage for a wide range of electronic applications, despite its limitations in storage capacity and write speed.

[Word count: 511]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi FT24C04A-UTR-T dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of FT24C04A-UTR-T:

  1. What is the FT24C04A-UTR-T?

    • The FT24C04A-UTR-T is a 4K-bit serial I2C bus EEPROM with a wide operating voltage range and low power consumption.

  2. What are the typical applications of FT24C04A-UTR-T?

    • Typical applications include storing configuration data, calibration constants, and other non-volatile information in various technical solutions.

  3. What is the operating voltage range of FT24C04A-UTR-T?

    • The operating voltage range is from 1.7V to 5.5V, making it suitable for a wide range of applications.

  4. What is the maximum clock frequency supported by FT24C04A-UTR-T?

    • The maximum clock frequency supported is 1MHz, allowing for fast data transfer.

  5. Can FT24C04A-UTR-T be used in automotive applications?

    • Yes, FT24C04A-UTR-T is suitable for automotive applications due to its wide operating voltage range and robust design.

  6. Does FT24C04A-UTR-T support write protection?

    • Yes, it supports a hardware write protection feature to prevent accidental writes to the memory.

  7. What is the endurance of FT24C04A-UTR-T?

    • It has a minimum of 100,000 write cycles, ensuring reliable long-term performance.

  8. Is FT24C04A-UTR-T RoHS compliant?

    • Yes, it is RoHS compliant, meeting environmental standards.

  9. Can FT24C04A-UTR-T operate at extended temperature ranges?

    • Yes, it can operate at extended temperature ranges from -40°C to 125°C, making it suitable for harsh environments.

  10. Are there any development tools or evaluation kits available for FT24C04A-UTR-T?

    • Yes, there are development tools and evaluation kits available to facilitate easy integration into technical solutions.

I hope these questions and answers are helpful! Let me know if you need further assistance.