Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
FT24C256A-USR-B

FT24C256A-USR-B

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Non-volatile Memory
  • Characteristics:
    • High storage capacity
    • Low power consumption
    • Serial I2C interface
  • Package: SOP-8
  • Essence: EEPROM memory chip
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Memory Size: 256 kilobits (32 kilobytes)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Endurance: 1 million cycles
  • Data Retention: 100 years

Detailed Pin Configuration

The FT24C256A-USR-B has a total of 8 pins arranged as follows:

```


| | | U | | | |___________|

Pin Configuration:

 1  2  3  4

| | | | | | |___________|

 5  6  7  8

```

Pin Description: 1. A0: Address Input 2. A1: Address Input 3. A2: Address Input 4. VSS: Ground 5. SDA: Serial Data Input/Output 6. SCL: Serial Clock Input 7. WP: Write Protect 8. VCC: Power Supply

Functional Features

  • Non-volatile memory: The FT24C256A-USR-B retains data even when the power is turned off.
  • I2C Interface: It uses the I2C protocol for communication, allowing easy integration with other devices.
  • High storage capacity: With 256 kilobits of memory, it can store a large amount of data.
  • Low power consumption: The chip operates at low power, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages: - High storage capacity - Low power consumption - Long data retention period - Easy integration with other devices

Disadvantages: - Limited write endurance (1 million cycles) - Requires an external pull-up resistor for the I2C bus

Working Principles

The FT24C256A-USR-B is based on Electrically Erasable Programmable Read-Only Memory (EEPROM) technology. It stores data by electrically charging or discharging specific memory cells within the chip. The I2C interface allows for easy reading and writing of data to the memory.

Detailed Application Field Plans

The FT24C256A-USR-B is commonly used in various electronic devices that require non-volatile memory, such as: - Consumer electronics (e.g., TVs, set-top boxes, digital cameras) - Automotive systems (e.g., infotainment systems, instrument clusters) - Industrial control systems - Medical devices - Smart meters

Detailed and Complete Alternative Models

  • AT24C256: Similar EEPROM memory chip from Atmel Corporation
  • CAT24C256: EEPROM memory chip from ON Semiconductor
  • M24C256: EEPROM memory chip from STMicroelectronics

These alternative models offer similar functionality and can be used as replacements for the FT24C256A-USR-B in various applications.

Word count: 380 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi FT24C256A-USR-B dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of FT24C256A-USR-B in technical solutions:

  1. Q: What is FT24C256A-USR-B? A: FT24C256A-USR-B is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip that has a storage capacity of 256 kilobits.

  2. Q: What are some common applications of FT24C256A-USR-B? A: FT24C256A-USR-B is commonly used in various technical solutions such as data logging, configuration storage, firmware updates, and parameter storage in microcontroller-based systems.

  3. Q: How does FT24C256A-USR-B communicate with other devices? A: FT24C256A-USR-B uses I2C (Inter-Integrated Circuit) communication protocol to interface with other devices, allowing for easy integration into different systems.

  4. Q: What is the operating voltage range of FT24C256A-USR-B? A: FT24C256A-USR-B operates within a voltage range of 1.7V to 5.5V, making it compatible with a wide range of power supply options.

  5. Q: Can FT24C256A-USR-B be used in both industrial and consumer applications? A: Yes, FT24C256A-USR-B is suitable for both industrial and consumer applications due to its robust design and reliability.

  6. Q: Is FT24C256A-USR-B capable of storing data permanently? A: Yes, FT24C256A-USR-B is non-volatile, which means it can retain stored data even when power is disconnected.

  7. Q: What is the maximum clock frequency supported by FT24C256A-USR-B? A: FT24C256A-USR-B supports a maximum clock frequency of 400 kHz, allowing for fast data transfer rates.

  8. Q: Can FT24C256A-USR-B withstand harsh environmental conditions? A: Yes, FT24C256A-USR-B is designed to operate reliably in a wide temperature range (-40°C to +85°C) and can withstand mechanical stress and vibration.

  9. Q: Does FT24C256A-USR-B have any built-in security features? A: No, FT24C256A-USR-B does not have built-in security features such as hardware encryption or write protection. Additional measures may be required for securing sensitive data.

  10. Q: Are there any limitations to consider when using FT24C256A-USR-B? A: One limitation is the limited number of write cycles (typically around 1 million). Care should also be taken to ensure proper voltage levels and timing requirements are met during operation.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.