Honeywell Sensing and Productivity Solutions
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PX2AF1XX010BABEX
Lihat Butiran Helaian data

PX2AF1XX010BABEX

Product Overview

Category: Electronic Component
Use: Pressure Sensor
Characteristics: High accuracy, compact design
Package: SMD
Essence: Measures pressure and converts it into an electrical signal
Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications

  • Pressure Range: 0-100 psi
  • Output: Analog Voltage
  • Accuracy: ±0.5%
  • Operating Temperature: -40°C to 125°C
  • Supply Voltage: 3.3V or 5V

Detailed Pin Configuration

| Pin Number | Function | |------------|--------------| | 1 | VCC (Supply) | | 2 | GND | | 3 | Output |

Functional Features

  • High accuracy and reliability
  • Compact and easy to integrate
  • Wide operating temperature range
  • Low power consumption

Advantages and Disadvantages

Advantages: - Accurate pressure measurement - Small form factor - Suitable for harsh environments

Disadvantages: - Limited pressure range - Requires external signal conditioning circuitry

Working Principles

The PX2AF1XX010BABEX operates on the principle of piezoresistive sensing. When pressure is applied, the sensor's internal diaphragm deflects, causing a change in resistance. This change is then converted into an analog voltage output proportional to the applied pressure.

Detailed Application Field Plans

  1. Automotive: Tire pressure monitoring systems
  2. Industrial: Hydraulic and pneumatic systems
  3. Medical: Patient monitoring equipment
  4. Consumer Electronics: Smart appliances and devices

Detailed and Complete Alternative Models

  1. PX2AG1XX020CAXAX
  2. PX2AH3XX030DADBX
  3. PX2AJ5XX040EAEEX

This completes the entry for PX2AF1XX010BABEX, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Word Count: 298

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PX2AF1XX010BABEX dalam penyelesaian teknikal

  1. What is PX2AF1XX010BABEX?

    • PX2AF1XX010BABEX is a pressure sensor manufactured by Omron that is commonly used in technical solutions to measure and monitor pressure in various applications.

  2. What is the operating range of PX2AF1XX010BABEX?

    • The operating range of PX2AF1XX010BABEX is typically from 0 to 10 bar.

  3. What is the output signal of PX2AF1XX010BABEX?

    • PX2AF1XX010BABEX provides an analog output signal, usually in the form of a voltage or current signal, proportional to the measured pressure.

  4. Is PX2AF1XX010BABEX suitable for use in harsh environments?

    • Yes, PX2AF1XX010BABEX is designed to withstand harsh industrial environments and is often rated for high levels of shock, vibration, and temperature.

  5. What are the common applications of PX2AF1XX010BABEX?

    • Common applications of PX2AF1XX010BABEX include hydraulic systems, pneumatic systems, industrial automation, and process control.

  6. Does PX2AF1XX010BABEX require calibration?

    • Yes, PX2AF1XX010BABEX may require periodic calibration to ensure accurate and reliable pressure measurements.

  7. Can PX2AF1XX010BABEX be integrated with PLCs or other control systems?

    • Yes, PX2AF1XX010BABEX can be easily integrated with programmable logic controllers (PLCs) and other control systems using its analog output signal.

  8. What is the power supply requirement for PX2AF1XX010BABEX?

    • PX2AF1XX010BABEX typically operates on a 24V DC power supply, but it's important to refer to the datasheet for specific requirements.

  9. Is PX2AF1XX010BABEX compatible with corrosive media?

    • Some versions of PX2AF1XX010BABEX are designed to be compatible with corrosive media, but it's essential to verify the specific model's compatibility for the intended application.

  10. Are there any special installation considerations for PX2AF1XX010BABEX?

    • It's important to follow the manufacturer's guidelines for proper installation, including considerations for mounting orientation, sealing, and electrical connections to ensure optimal performance and longevity.