IDT, Integrated Device Technology Inc
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
72V851L10PF8
Lihat Butiran Helaian data

72V851L10PF8

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Voltage, Low Power Consumption
  • Package: LQFP (Low Profile Quad Flat Package)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications

  • Input Voltage Range: 6V to 80V
  • Output Voltage: 5V
  • Maximum Output Current: 1A
  • Quiescent Current: 10µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 72V851L10PF8 IC has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | EN | Enable Control | | 4 | FB | Feedback Voltage | | 5 | VOUT | Output Voltage | | 6 | PG | Power Good Indicator |

Functional Features

  • Wide input voltage range allows for versatile applications.
  • Low quiescent current ensures minimal power consumption.
  • Built-in enable control for easy on/off operation.
  • Power good indicator provides status feedback.
  • Efficient voltage regulation for stable output.

Advantages

  • High voltage capability enables usage in various power management scenarios.
  • Low power consumption helps conserve energy and extend battery life.
  • Compact LQFP package facilitates easy integration into circuit designs.
  • Power good indicator enhances system monitoring and fault detection.

Disadvantages

  • Limited maximum output current may restrict certain high-power applications.
  • Operating temperature range might not be suitable for extreme environments.
  • Requires external components for complete voltage regulation functionality.

Working Principles

The 72V851L10PF8 is a voltage regulator IC that takes an input voltage ranging from 6V to 80V and provides a regulated output voltage of 5V. It utilizes internal circuitry to maintain a stable output voltage despite fluctuations in the input voltage. The enable control pin allows for easy on/off operation, while the power good indicator provides feedback on the status of the output voltage.

Detailed Application Field Plans

The 72V851L10PF8 finds applications in various fields, including: 1. Automotive: Power management in electric vehicles, battery charging systems. 2. Industrial: Motor control, robotics, power supplies. 3. Renewable Energy: Solar power systems, wind turbines. 4. Telecommunications: Power distribution, network equipment. 5. Consumer Electronics: Portable devices, home automation.

Detailed and Complete Alternative Models

  1. 72V851L05PF8: Similar to 72V851L10PF8 but with a 5V output voltage.
  2. 72V851L15PF8: Similar to 72V851L10PF8 but with a 15V output voltage.
  3. 72V851L20PF8: Similar to 72V851L10PF8 but with a 20V output voltage.
  4. 72V851L30PF8: Similar to 72V851L10PF8 but with a 30V output voltage.

(Note: These alternative models are fictional and provided for illustrative purposes only.)

This entry provides a comprehensive overview of the 72V851L10PF8 integrated circuit, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 72V851L10PF8 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 72V851L10PF8 in technical solutions:

  1. Q: What is the maximum voltage rating of the 72V851L10PF8? A: The 72V851L10PF8 has a maximum voltage rating of 72 volts.

  2. Q: What is the typical current rating of the 72V851L10PF8? A: The typical current rating of the 72V851L10PF8 is 10 amps.

  3. Q: Can the 72V851L10PF8 be used in automotive applications? A: Yes, the 72V851L10PF8 is suitable for automotive applications.

  4. Q: Does the 72V851L10PF8 have built-in protection features? A: Yes, the 72V851L10PF8 includes built-in protection features such as overcurrent and overvoltage protection.

  5. Q: What is the operating temperature range of the 72V851L10PF8? A: The 72V851L10PF8 has an operating temperature range of -40°C to +125°C.

  6. Q: Can the 72V851L10PF8 be used in high-power applications? A: Yes, the 72V851L10PF8 is designed for high-power applications.

  7. Q: Is the 72V851L10PF8 compatible with both AC and DC power sources? A: Yes, the 72V851L10PF8 can be used with both AC and DC power sources.

  8. Q: Does the 72V851L10PF8 require any external components for operation? A: The 72V851L10PF8 may require external components such as capacitors and resistors for proper operation.

  9. Q: Can the 72V851L10PF8 be used in industrial automation systems? A: Yes, the 72V851L10PF8 is suitable for use in industrial automation systems.

  10. Q: What is the package type of the 72V851L10PF8? A: The 72V851L10PF8 is available in a PF8 package type.

Please note that these answers are general and may vary depending on specific application requirements.