IDT, Integrated Device Technology Inc
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
QS3VH16211PAG8
Lihat Butiran Helaian data

QS3VH16211PAG8

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Switch
  • Characteristics: High-speed, Low-power, Bidirectional
  • Package: 48-pin TSSOP
  • Essence: A high-performance signal switch designed for various applications
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Number of Channels: 16
  • Voltage Supply Range: 2.3V to 3.6V
  • On-State Resistance: 4 Ohms (typical)
  • Bandwidth: 500 MHz (typical)
  • Input/Output Capacitance: 5 pF (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The QS3VH16211PAG8 has a 48-pin TSSOP package with the following pin configuration:

  1. OE (Output Enable) 1
  2. I/O 1A
  3. I/O 1B
  4. GND (Ground)
  5. I/O 2A
  6. I/O 2B
  7. VCC (Power Supply)
  8. I/O 3A
  9. I/O 3B
  10. GND (Ground)
  11. I/O 4A
  12. I/O 4B
  13. I/O 5A
  14. I/O 5B
  15. GND (Ground)
  16. I/O 6A
  17. I/O 6B
  18. VCC (Power Supply)
  19. I/O 7A
  20. I/O 7B
  21. GND (Ground)
  22. I/O 8A
  23. I/O 8B
  24. I/O 9A
  25. I/O 9B
  26. GND (Ground)
  27. I/O 10A
  28. I/O 10B
  29. VCC (Power Supply)
  30. I/O 11A
  31. I/O 11B
  32. GND (Ground)
  33. I/O 12A
  34. I/O 12B
  35. I/O 13A
  36. I/O 13B
  37. GND (Ground)
  38. I/O 14A
  39. I/O 14B
  40. VCC (Power Supply)
  41. I/O 15A
  42. I/O 15B
  43. GND (Ground)
  44. I/O 16A
  45. I/O 16B
  46. NC (No Connection)
  47. OE (Output Enable) 2
  48. VCC (Power Supply)

Functional Features

  • Bidirectional signal switching capability
  • High-speed operation suitable for data transmission applications
  • Low power consumption for energy-efficient designs
  • Wide voltage supply range for compatibility with various systems
  • ESD protection on all pins for enhanced reliability

Advantages and Disadvantages

Advantages: - High-performance signal switching - Wide operating temperature range - ESD protection for improved reliability - Suitable for high-speed data transmission

Disadvantages: - Limited number of channels (16) - Requires external control signals for proper operation

Working Principles

The QS3VH16211PAG8 is a bidirectional signal switch that allows the connection or isolation of multiple input/output channels. It operates by controlling the state of the output enable (OE) pins, which determine whether the inputs are connected to the outputs or not. When the OE pin is active, the switch is enabled, and the inputs are connected to the outputs. Conversely, when the OE pin is inactive, the switch is disabled, and the inputs are isolated from the outputs.

Detailed Application Field Plans

The QS3VH16211PAG8 is widely used in various applications that require signal switching, such as:

  1. Data communication systems
  2. Networking equipment
  3. Test and measurement instruments
  4. Industrial automation
  5. Audio/video equipment
  6. Medical devices
  7. Automotive electronics
  8. Consumer electronics

Detailed and Complete Alternative Models

  1. QS3VH16211PAG8X: Similar to QS3VH16211PAG8 but with extended temperature range (-55°C to +125°C).
  2. QS3VH16211PAG8G: Similar to QS3VH16211PAG8 but available in a 56-pin TSSOP package.
  3. QS3VH16211PAG8T: Similar to QS3VH16211PAG8 but with improved ESD protection levels.

These alternative models offer similar functionality and can be considered as substitutes for the QS3VH16211PAG8 depending on specific requirements.

*Word count:

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi QS3VH16211PAG8 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of QS3VH16211PAG8 in technical solutions:

1. What is QS3VH16211PAG8? QS3VH16211PAG8 is a high-performance, low-voltage, 12-bit bus switch designed for various applications in electronic systems.

2. What is the voltage range supported by QS3VH16211PAG8? QS3VH16211PAG8 supports a wide voltage range from 1.65V to 3.6V, making it compatible with many different systems.

3. What is the maximum data rate supported by QS3VH16211PAG8? QS3VH16211PAG8 can support data rates up to 400 Mbps, making it suitable for high-speed communication applications.

4. Can QS3VH16211PAG8 be used as a bidirectional switch? Yes, QS3VH16211PAG8 is a bidirectional switch, allowing data to flow in both directions.

5. How many channels does QS3VH16211PAG8 have? QS3VH16211PAG8 has 16 channels, which can be independently controlled.

6. Is QS3VH16211PAG8 hot-swappable? Yes, QS3VH16211PAG8 supports hot-swapping, enabling easy replacement or addition of devices without powering down the system.

7. What is the power supply requirement for QS3VH16211PAG8? QS3VH16211PAG8 requires a single power supply voltage ranging from 1.65V to 3.6V.

8. Can QS3VH16211PAG8 handle high current levels? Yes, QS3VH16211PAG8 has a high current drive capability, making it suitable for applications that require driving heavy loads.

9. Is QS3VH16211PAG8 compatible with different logic families? Yes, QS3VH16211PAG8 is compatible with various logic families, including TTL, CMOS, and LVCMOS.

10. What are some typical applications of QS3VH16211PAG8? QS3VH16211PAG8 can be used in a wide range of applications, such as data acquisition systems, communication interfaces, memory modules, and industrial automation equipment.

Please note that the specific details and features of QS3VH16211PAG8 may vary, so it's always recommended to refer to the datasheet or consult the manufacturer for accurate information.