Infineon Technologies
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
BTS426L1 E3043
Lihat Butiran Helaian data

BTS426L1 E3043

Product Overview

Category

The BTS426L1 E3043 belongs to the category of power switch and motor driver integrated circuits.

Use

It is primarily used for controlling motors in automotive applications.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Overtemperature shutdown
  • Short-circuit protection
  • Overload protection

Package

The BTS426L1 E3043 comes in a compact and robust package, suitable for automotive environments.

Essence

This product combines power switching and motor control functionalities into a single integrated circuit, providing efficient and reliable motor control solutions.

Packaging/Quantity

The BTS426L1 E3043 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply voltage: 5.5V to 40V
  • Output current: Up to 10A
  • On-state resistance: 30mΩ (max)
  • Operating temperature range: -40°C to +150°C

Detailed Pin Configuration

The BTS426L1 E3043 has the following pin configuration:

  1. IN1: Input 1
  2. IN2: Input 2
  3. OUT1: Output 1
  4. OUT2: Output 2
  5. GND: Ground
  6. VCC: Supply voltage

Functional Features

  • Dual-channel H-bridge configuration
  • PWM input for speed control
  • Fault diagnosis output
  • Sleep mode for low power consumption
  • Fast demagnetization of inductive loads

Advantages and Disadvantages

Advantages

  • High voltage capability allows for use in various automotive systems
  • Low on-resistance minimizes power losses and improves efficiency
  • Overtemperature and short-circuit protection enhance system safety
  • Overload protection prevents damage to the motor and driver

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Operating temperature range may restrict usage in extreme environments

Working Principles

The BTS426L1 E3043 operates by receiving control signals through the IN1 and IN2 pins, which determine the direction and speed of the motor. The integrated H-bridge configuration allows bidirectional control of the motor. PWM input provides precise speed control, while fault diagnosis output alerts the system in case of any abnormalities.

Detailed Application Field Plans

The BTS426L1 E3043 is widely used in automotive applications, including:

  1. Electric power steering systems
  2. Electric braking systems
  3. HVAC blowers and fans
  4. Window lift and sunroof control
  5. Seat adjustment mechanisms

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the BTS426L1 E3043 include:

  1. BTS555: Higher output current capability
  2. BTS7960: Enhanced thermal management features
  3. BTS50085: Lower on-resistance for improved efficiency

These alternative models can be considered based on specific application requirements and constraints.

In conclusion, the BTS426L1 E3043 is a versatile power switch and motor driver IC designed for automotive applications. Its high voltage capability, low on-resistance, and comprehensive protection features make it an ideal choice for various motor control systems.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi BTS426L1 E3043 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of BTS426L1 E3043 in technical solutions:

Q1: What is BTS426L1 E3043? A1: BTS426L1 E3043 is a specific model of high-side power switch used for controlling loads in automotive and industrial applications.

Q2: What is the maximum voltage rating of BTS426L1 E3043? A2: The maximum voltage rating of BTS426L1 E3043 is typically 42V.

Q3: What is the maximum current rating of BTS426L1 E3043? A3: The maximum current rating of BTS426L1 E3043 is typically 5A.

Q4: What are the typical applications of BTS426L1 E3043? A4: BTS426L1 E3043 is commonly used in various technical solutions such as automotive lighting, heating systems, motor control, and power distribution.

Q5: Does BTS426L1 E3043 have built-in protection features? A5: Yes, BTS426L1 E3043 has built-in protection features like overcurrent protection, overtemperature protection, and short-circuit protection.

Q6: Can BTS426L1 E3043 be controlled using a microcontroller? A6: Yes, BTS426L1 E3043 can be easily controlled using a microcontroller through its enable pin and diagnostic feedback pin.

Q7: What is the operating temperature range of BTS426L1 E3043? A7: The operating temperature range of BTS426L1 E3043 is typically -40°C to +150°C.

Q8: Is BTS426L1 E3043 suitable for automotive applications? A8: Yes, BTS426L1 E3043 is specifically designed for automotive applications and meets the required automotive standards.

Q9: Can BTS426L1 E3043 handle inductive loads? A9: Yes, BTS426L1 E3043 is capable of handling inductive loads with appropriate protection measures like freewheeling diodes.

Q10: What are the advantages of using BTS426L1 E3043 in technical solutions? A10: Some advantages of using BTS426L1 E3043 include its high current rating, built-in protection features, compatibility with microcontrollers, and suitability for automotive applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.