Infineon Technologies
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ICE2A765I
Lihat Butiran Helaian data

ICE2A765I

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, low standby power consumption
  • Package: DIP-8 (Dual In-line Package)
  • Essence: PWM Controller for Switched Mode Power Supplies
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Input Voltage Range: 8V to 20V
  • Output Voltage Range: 5V to 15V
  • Operating Frequency: 50kHz to 100kHz
  • Maximum Duty Cycle: 80%
  • Operating Temperature Range: -40°C to +125°C
  • Protection Features: Overload protection, overvoltage protection, overtemperature protection

Detailed Pin Configuration

The ICE2A765I has a total of 8 pins. The pin configuration is as follows:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for voltage regulation
  4. CS: Current sense input
  5. COMP: Compensation pin for stability control
  6. SS: Soft-start pin for gradual startup
  7. OUT: Output pin for regulated voltage
  8. RT: Timing resistor connection for frequency adjustment

Functional Features

  • Pulse Width Modulation (PWM) control for efficient power conversion
  • Adjustable output voltage and operating frequency
  • Soft-start function for smooth startup and reduced stress on components
  • Overload, overvoltage, and overtemperature protection for enhanced reliability
  • Error amplifier with compensation for stable voltage regulation

Advantages and Disadvantages

Advantages

  • High efficiency leading to reduced power loss
  • Low standby power consumption for energy-saving operation
  • Wide input and output voltage range for versatile applications
  • Robust protection features for increased reliability
  • Compact DIP-8 package for easy integration

Disadvantages

  • Limited maximum duty cycle of 80%
  • Requires external timing resistor for frequency adjustment

Working Principles

The ICE2A765I is a PWM controller designed for switched-mode power supplies. It operates by modulating the width of the output pulses to control the power delivered to the load. The feedback pin (FB) compares the output voltage with a reference voltage, and the error amplifier adjusts the duty cycle accordingly to maintain stable regulation. The current sense input (CS) provides information about the load current, enabling overload protection. The soft-start function gradually increases the duty cycle during startup to prevent excessive inrush current.

Detailed Application Field Plans

The ICE2A765I is commonly used in various applications, including:

  1. AC/DC power supplies
  2. LED lighting systems
  3. Battery chargers
  4. Industrial power equipment
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. ICE2A365I: Similar functionality with a different pin configuration (SOP-8 package)
  2. ICE2A180Z: Higher operating frequency range (100kHz to 200kHz)
  3. ICE2A280H: Integrated high-side driver for synchronous rectification

These alternative models offer similar features and can be considered based on specific application requirements.

Word count: 314 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ICE2A765I dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ICE2A765I in technical solutions:

  1. Q: What is ICE2A765I? A: ICE2A765I is a highly integrated power control IC designed for offline flyback converters used in various applications.

  2. Q: What is the input voltage range supported by ICE2A765I? A: ICE2A765I supports an input voltage range from 85V AC to 265V AC.

  3. Q: What is the maximum output power that can be achieved with ICE2A765I? A: The maximum output power depends on the specific design and application, but typically it can handle up to 25W.

  4. Q: Can ICE2A765I operate in continuous or discontinuous conduction mode? A: Yes, ICE2A765I can operate in both continuous and discontinuous conduction modes, providing flexibility in different load conditions.

  5. Q: Does ICE2A765I have built-in protection features? A: Yes, ICE2A765I incorporates various protection features like overvoltage protection (OVP), overload protection (OLP), and overtemperature protection (OTP).

  6. Q: What is the typical switching frequency of ICE2A765I? A: The typical switching frequency of ICE2A765I is around 67 kHz, but it can be adjusted using external components.

  7. Q: Can ICE2A765I support dimming functionality for LED lighting applications? A: Yes, ICE2A765I has a dedicated pin for implementing dimming control, making it suitable for LED lighting applications.

  8. Q: Is ICE2A765I compatible with both primary-side and secondary-side regulation? A: Yes, ICE2A765I supports both primary-side and secondary-side regulation methods, providing flexibility in different system designs.

  9. Q: What is the standby power consumption of ICE2A765I? A: The standby power consumption of ICE2A765I is typically very low, ensuring energy efficiency during idle or light load conditions.

  10. Q: Are there any reference designs available for ICE2A765I? A: Yes, Infineon provides reference designs and application notes that can help engineers in implementing ICE2A765I in their technical solutions.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.