Infineon Technologies
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
IR2130JTR
Lihat Butiran Helaian data

IR2130JTR

Product Overview

Category: Integrated Circuit (IC)

Use: The IR2130JTR is a high voltage, high-speed power MOSFET and IGBT driver IC. It is specifically designed for three-phase motor control applications.

Characteristics: - High voltage capability - Fast switching speed - Integrated protection features - Suitable for driving power MOSFETs and IGBTs

Package: The IR2130JTR is available in a compact 28-pin SOIC (Small Outline Integrated Circuit) package.

Essence: The essence of the IR2130JTR lies in its ability to efficiently drive power MOSFETs and IGBTs in three-phase motor control applications.

Packaging/Quantity: The IR2130JTR is typically sold in reels containing 250 units per reel.

Specifications

  • Supply Voltage: 10V - 20V
  • Output Current: 200mA
  • Operating Temperature Range: -40°C to +125°C
  • Maximum PWM Frequency: 30kHz
  • Fault Shutdown Delay: 1.5μs

Detailed Pin Configuration

The IR2130JTR features a total of 28 pins. The pin configuration is as follows:

  1. VCC
  2. HO1
  3. LO1
  4. VS
  5. VB
  6. HO2
  7. LO2
  8. HO3
  9. LO3
  10. SD
  11. VREF
  12. RT
  13. CT
  14. OSC
  15. NC
  16. NC
  17. NC
  18. NC
  19. NC
  20. NC
  21. NC
  22. NC
  23. NC
  24. NC
  25. NC
  26. NC
  27. NC
  28. GND

Functional Features

The IR2130JTR offers the following functional features:

  • High voltage level shifting
  • Over-current protection
  • Under-voltage lockout
  • Shoot-through protection
  • Adjustable dead-time control
  • Fault shutdown with delay

Advantages and Disadvantages

Advantages: - High voltage capability allows for driving power MOSFETs and IGBTs in various applications. - Fast switching speed enables efficient motor control. - Integrated protection features enhance system reliability. - Adjustable dead-time control improves overall performance.

Disadvantages: - Limited maximum PWM frequency of 30kHz may not be suitable for certain high-frequency applications. - The 28-pin SOIC package may require additional space compared to smaller packages.

Working Principles

The IR2130JTR operates by receiving control signals from a microcontroller or other control circuitry. It uses these signals to drive the gates of power MOSFETs or IGBTs, enabling precise control of three-phase motor operation. The integrated protection features ensure safe operation by monitoring various parameters and triggering fault shutdown if necessary.

Detailed Application Field Plans

The IR2130JTR is commonly used in the following application fields:

  1. Industrial motor control systems
  2. Electric vehicle propulsion systems
  3. Renewable energy systems (wind turbines, solar inverters)
  4. Robotics and automation

Detailed and Complete Alternative Models

  1. IR2101: Similar functionality, but with lower output current capability.
  2. IR2184: Higher output current capability, suitable for driving larger power devices.
  3. IR2110: Dual high and low-side driver, ideal for half-bridge configurations.

These alternative models offer similar features and can be considered as substitutes for the IR2130JTR depending on specific requirements.

Word count: 455 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi IR2130JTR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of IR2130JTR in technical solutions:

  1. Q: What is IR2130JTR? A: IR2130JTR is a high-voltage, high-speed power MOSFET and IGBT driver IC (integrated circuit) commonly used in motor control applications.

  2. Q: What are the key features of IR2130JTR? A: The key features of IR2130JTR include three-phase gate drive capability, integrated bootstrap diode, undervoltage lockout protection, and fault reporting.

  3. Q: How does IR2130JTR help in motor control applications? A: IR2130JTR provides precise control over the switching of power MOSFETs or IGBTs, enabling efficient and reliable motor control with adjustable speed and direction.

  4. Q: Can IR2130JTR be used for single-phase motor control? A: Yes, IR2130JTR can be used for single-phase motor control by utilizing only one phase output and leaving the other two outputs floating.

  5. Q: What is the maximum voltage rating supported by IR2130JTR? A: IR2130JTR supports a maximum voltage rating of typically 600V, making it suitable for a wide range of high-voltage applications.

  6. Q: How is IR2130JTR powered? A: IR2130JTR requires a separate power supply for its internal logic circuitry, typically ranging from 10V to 20V, while the high-side and low-side gate drivers are powered by the motor's power supply.

  7. Q: Does IR2130JTR have built-in protection features? A: Yes, IR2130JTR includes various protection features such as undervoltage lockout, overcurrent protection, and fault reporting to ensure safe operation of the motor control system.

  8. Q: Can IR2130JTR be used in high-frequency applications? A: Yes, IR2130JTR is designed for high-speed switching applications and can operate at relatively high frequencies, making it suitable for various motor control systems.

  9. Q: Are there any application notes or reference designs available for IR2130JTR? A: Yes, International Rectifier (now Infineon Technologies) provides application notes and reference designs that offer guidance on using IR2130JTR in different motor control applications.

  10. Q: Where can I purchase IR2130JTR? A: IR2130JTR can be purchased from authorized distributors of Infineon Technologies or other electronic component suppliers.