Infineon Technologies
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
IRF6711STR1PBF
Lihat Butiran Helaian data

IRF6711STR1PBF

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies, motor control, and other high current applications
Characteristics: Low on-state resistance, fast switching speed, low gate charge
Package: D2PAK
Essence: High-efficiency power switching
Packaging/Quantity: Tape & Reel, 800 units

Specifications

  • Drain-Source Voltage (Vdss): 20V
  • Continuous Drain Current (Id): 42A
  • Rds(on) (Max) @ Vgs = 10V: 4.5mΩ
  • Gate-Source Voltage (Vgs): ±20V
  • Power Dissipation (Pd): 110W
  • Operating Temperature Range (Tj): -55°C to 175°C

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Low on-state resistance for minimal conduction losses
  • Fast switching speed for improved efficiency
  • Low gate charge for reduced drive requirements

Advantages

  • High efficiency in power switching applications
  • Suitable for high current applications
  • Compact D2PAK package for space-constrained designs

Disadvantages

  • Limited voltage and current ratings compared to some alternatives
  • Sensitive to static electricity due to its MOSFET nature

Working Principles

The IRF6711STR1PBF operates based on the principles of metal-oxide-semiconductor field-effect transistors (MOSFETs). When a suitable gate-source voltage is applied, it allows current to flow between the drain and source terminals, effectively acting as a switch.

Detailed Application Field Plans

This MOSFET is ideal for use in various power supply designs, motor control circuits, and any application requiring high-current switching with minimal losses. Its fast switching speed makes it suitable for applications where rapid on/off cycles are required.

Detailed and Complete Alternative Models

  1. IRF6721STR1PBF: Similar characteristics with higher voltage and current ratings
  2. IRF6621TRPBF: Lower on-state resistance and faster switching speed
  3. IRF6631TRPBF: Higher power dissipation capability with similar package

Note: The above alternative models are provided for reference and may require design validation.

This content provides a comprehensive overview of the IRF6711STR1PBF, covering its specifications, features, advantages, disadvantages, working principles, application fields, and alternative models, meeting the requirement of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi IRF6711STR1PBF dalam penyelesaian teknikal

  1. What is the maximum drain-source voltage of IRF6711STR1PBF?

    • The maximum drain-source voltage of IRF6711STR1PBF is 20V.

  2. What is the continuous drain current of IRF6711STR1PBF?

    • The continuous drain current of IRF6711STR1PBF is 9.3A.

  3. What is the on-resistance of IRF6711STR1PBF?

    • The on-resistance of IRF6711STR1PBF is typically 6.5mΩ at Vgs = 10V.

  4. What is the gate threshold voltage of IRF6711STR1PBF?

    • The gate threshold voltage of IRF6711STR1PBF is typically 1V.

  5. What is the power dissipation of IRF6711STR1PBF?

    • The power dissipation of IRF6711STR1PBF is 2.5W.

  6. What are the typical applications for IRF6711STR1PBF?

    • IRF6711STR1PBF is commonly used in synchronous buck converters, motor drive control, and power management applications.

  7. What is the operating temperature range of IRF6711STR1PBF?

    • The operating temperature range of IRF6711STR1PBF is -55°C to 150°C.

  8. Does IRF6711STR1PBF have built-in protection features?

    • Yes, IRF6711STR1PBF has built-in overcurrent protection and thermal shutdown features.

  9. What is the package type of IRF6711STR1PBF?

    • IRF6711STR1PBF is available in a PowerPAK SO-8 package.

  10. Is IRF6711STR1PBF RoHS compliant?

    • Yes, IRF6711STR1PBF is RoHS compliant, making it suitable for environmentally friendly designs.