Infineon Technologies
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
IRMCF171TY
Lihat Butiran Helaian data

IRMCF171TY

Product Overview

Category: Infrared Remote Control Module
Use: This module is designed to receive and decode infrared signals from remote controls.
Characteristics: The IRMCF171TY module has a compact size, low power consumption, and high sensitivity. It is suitable for various applications that require remote control functionality.
Package: The module comes in a small surface-mount package.
Essence: The essence of the IRMCF171TY module lies in its ability to receive and interpret infrared signals from remote controls.
Packaging/Quantity: The module is typically sold in reels containing a specified quantity.

Specifications

  • Operating Voltage: 2.7V - 5.5V
  • Carrier Frequency Range: 30kHz - 56kHz
  • Supply Current: <1.5mA
  • Output Format: NEC, RC5, RC6, Sony, Panasonic, JVC, Samsung, etc.
  • Operating Temperature: -20°C to +85°C

Detailed Pin Configuration

The IRMCF171TY module has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground connection
  3. OUT: Output pin for decoded signals

Functional Features

  • High sensitivity allows reliable reception of infrared signals.
  • Wide operating voltage range enables compatibility with various systems.
  • Supports multiple output formats, making it compatible with different remote control protocols.
  • Low power consumption ensures energy efficiency.
  • Compact size allows for easy integration into space-constrained designs.

Advantages and Disadvantages

Advantages: - High sensitivity for reliable signal reception. - Wide operating voltage range for compatibility. - Multiple output formats for protocol flexibility. - Low power consumption for energy efficiency. - Compact size for easy integration.

Disadvantages: - Limited carrier frequency range may not support all remote control protocols. - Surface-mount package may require specialized equipment for soldering.

Working Principles

The IRMCF171TY module works by receiving infrared signals emitted by a remote control. It uses an integrated infrared receiver to detect the incoming signals. The module then decodes the received signals based on the selected output format. The decoded information is made available through the output pin, allowing the connected system to interpret and respond to the remote control commands.

Detailed Application Field Plans

The IRMCF171TY module finds applications in various fields, including:

  1. Consumer Electronics: Used in TVs, DVD players, set-top boxes, and other home entertainment devices for remote control functionality.
  2. Home Automation: Integrated into smart home systems to enable remote control of lights, appliances, and other connected devices.
  3. Automotive: Incorporated into car audio systems, navigation systems, and other automotive electronics for remote control operations.
  4. Industrial Control: Utilized in industrial automation systems for remote monitoring and control of machinery and equipment.

Detailed and Complete Alternative Models

  1. IRMCF170: Similar to IRMCF171TY but with a different pin configuration.
  2. IRMCF172: Enhanced version with extended carrier frequency range and additional features.
  3. IRMCF173: Compact module with reduced power consumption and improved sensitivity.

These alternative models offer similar functionality to the IRMCF171TY module and can be considered as alternatives based on specific requirements.

Word count: 437 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi IRMCF171TY dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of IRMCF171TY in technical solutions:

  1. Q: What is IRMCF171TY? A: IRMCF171TY is a model number for an infrared remote control receiver module commonly used in technical solutions.

  2. Q: How does IRMCF171TY work? A: IRMCF171TY receives infrared signals from a remote control and converts them into electrical signals that can be processed by a microcontroller or other electronic components.

  3. Q: What are the typical applications of IRMCF171TY? A: IRMCF171TY is often used in various technical solutions, such as home automation systems, consumer electronics, robotics, and industrial control systems.

  4. Q: Can IRMCF171TY work with any remote control? A: Yes, IRMCF171TY is designed to work with most standard infrared remote controls operating at frequencies between 30kHz and 56kHz.

  5. Q: How do I connect IRMCF171TY to my microcontroller? A: IRMCF171TY usually has three pins - VCC (power supply), GND (ground), and OUT (output signal). Connect VCC and GND to the appropriate power and ground pins on your microcontroller, and connect OUT to a digital input pin.

  6. Q: What is the range of IRMCF171TY? A: The range of IRMCF171TY depends on various factors like the strength of the infrared signal, obstacles, and ambient lighting conditions. Typically, it can receive signals within a range of 5-10 meters.

  7. Q: Can I use multiple IRMCF171TY modules in the same project? A: Yes, you can use multiple IRMCF171TY modules in the same project by connecting each module to a separate digital input pin on your microcontroller.

  8. Q: How do I decode the signals received by IRMCF171TY? A: You can use an infrared remote control library or write your own code to decode the signals received by IRMCF171TY. The decoded signals will typically represent specific commands or data.

  9. Q: Can I use IRMCF171TY with Arduino or Raspberry Pi? A: Yes, IRMCF171TY is compatible with popular development boards like Arduino and Raspberry Pi. There are libraries and example codes available that make it easy to integrate IRMCF171TY into your projects.

  10. Q: Are there any limitations or considerations when using IRMCF171TY? A: Some considerations include ensuring line-of-sight between the remote control and IRMCF171TY, avoiding interference from other infrared sources, and accounting for different remote control protocols if necessary.