Intel FPGAs/Altera
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
10AS048K4F35E3LG
Lihat Butiran Helaian data

10AS048K4F35E3LG

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Signal Processor (DSP)
  • Characteristics: High-performance, low-power consumption, compact size
  • Package: Surface Mount Technology (SMT)
  • Essence: Advanced signal processing capabilities in a small form factor
  • Packaging/Quantity: Tape and reel packaging, available in various quantities

Specifications

  • Model Number: 10AS048K4F35E3LG
  • Architecture: 32-bit RISC
  • Clock Speed: 1.2 GHz
  • Instruction Set: ARM Cortex-M4
  • Memory: 48 KB RAM, 256 KB Flash
  • Operating Voltage: 3.3V
  • I/O Pins: 35
  • Communication Interfaces: UART, SPI, I2C, USB
  • Analog-to-Digital Converter (ADC): 12-bit, 8 channels
  • Digital-to-Analog Converter (DAC): 10-bit, 2 channels

Detailed Pin Configuration

The 10AS048K4F35E3LG has a total of 35 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VDD | Power Supply (3.3V) | | 2 | GND | Ground | | 3 | RESET | Reset Input | | 4 | XTALIN | Crystal Oscillator Input | | 5 | XTALOUT | Crystal Oscillator Output | | 6-13 | GPIO0-7 | General Purpose I/O Pins | | 14 | ADC0 | Analog-to-Digital Converter Input 0 | | 15 | ADC1 | Analog-to-Digital Converter Input 1 | | ... | ... | ... | | 33 | DAC0 | Digital-to-Analog Converter Output 0 | | 34 | DAC1 | Digital-to-Analog Converter Output 1 | | 35 | VDDA | Analog Power Supply (3.3V) |

Functional Features

  • High-performance digital signal processing capabilities
  • Low-power consumption for energy-efficient applications
  • Compact size allows for integration in space-constrained designs
  • Support for various communication interfaces enables connectivity
  • Built-in analog-to-digital and digital-to-analog converters for mixed-signal applications

Advantages and Disadvantages

Advantages

  • Powerful processing capabilities for demanding applications
  • Efficient power usage for extended battery life
  • Small footprint for flexible integration
  • Versatile communication interfaces for connectivity options
  • Integrated analog-to-digital and digital-to-analog converters for mixed-signal processing

Disadvantages

  • Limited memory capacity compared to some other DSPs
  • Higher cost compared to entry-level DSPs
  • Steeper learning curve for programming and optimizing performance

Working Principles

The 10AS048K4F35E3LG is based on a 32-bit RISC architecture, specifically the ARM Cortex-M4 instruction set. It operates at a clock speed of 1.2 GHz and utilizes its high-performance processing capabilities to execute complex digital signal processing algorithms. The IC integrates various peripherals and communication interfaces, allowing it to interface with external devices and sensors. Its low-power design ensures efficient operation even in battery-powered applications.

Detailed Application Field Plans

The 10AS048K4F35E3LG finds applications in a wide range of fields, including: 1. Industrial Automation: Control systems, motor control, robotics 2. Consumer Electronics: Audio processing, smart home devices, wearable technology 3. Automotive: Infotainment systems, driver assistance, engine control 4. Medical Devices: Patient monitoring, diagnostic equipment, imaging systems 5. Internet of Things (IoT): Sensor nodes, edge computing, data acquisition

Detailed and Complete Alternative Models

  1. 10AS032K2F25E3LG: Similar to 10AS048K4F35E3LG but with 32 KB RAM and 128 KB Flash memory.
  2. 10AS064K8F50E3LG: Upgraded version with 64 KB RAM, 512 KB Flash memory, and additional I/O pins.
  3. 10AS016K1F20E3LG: Entry-level model with 16 KB RAM, 64 KB Flash memory, and reduced pin count.

These alternative models offer varying specifications and capabilities to cater to different application requirements.

Word Count: 558 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 10AS048K4F35E3LG dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 10AS048K4F35E3LG in technical solutions:

  1. Question: What is the purpose of 10AS048K4F35E3LG in technical solutions?
    Answer: 10AS048K4F35E3LG is a specific component used for a variety of purposes, such as power management, signal conditioning, or control in technical solutions.

  2. Question: What are the key features of 10AS048K4F35E3LG?
    Answer: Some key features of 10AS048K4F35E3LG include its compact size, high efficiency, low power consumption, and compatibility with various input/output voltages.

  3. Question: How can 10AS048K4F35E3LG be integrated into a technical solution?
    Answer: 10AS048K4F35E3LG can be integrated by connecting it to the appropriate power supply, input/output devices, and control circuitry based on the requirements of the technical solution.

  4. Question: What are the typical applications of 10AS048K4F35E3LG?
    Answer: 10AS048K4F35E3LG can be used in various technical solutions, including industrial automation, robotics, renewable energy systems, automotive electronics, and consumer electronics.

  5. Question: What is the maximum power rating of 10AS048K4F35E3LG?
    Answer: The maximum power rating of 10AS048K4F35E3LG is typically specified by the manufacturer and can vary depending on the specific model.

  6. Question: Does 10AS048K4F35E3LG require any external components for operation?
    Answer: Yes, 10AS048K4F35E3LG may require external components such as capacitors, resistors, or inductors to ensure proper operation and stability in the technical solution.

  7. Question: Can 10AS048K4F35E3LG handle different input/output voltage levels?
    Answer: Yes, 10AS048K4F35E3LG is designed to handle a range of input/output voltage levels, but it is important to check the datasheet or specifications for the specific model to ensure compatibility.

  8. Question: Is 10AS048K4F35E3LG suitable for high-temperature environments?
    Answer: Some models of 10AS048K4F35E3LG are designed to operate in high-temperature environments, but it is crucial to verify the temperature range specified by the manufacturer.

  9. Question: Can 10AS048K4F35E3LG be used in both AC and DC applications?
    Answer: Yes, 10AS048K4F35E3LG can be used in both AC and DC applications, depending on the specific model and its compatibility with the input power source.

  10. Question: Are there any specific safety considerations when using 10AS048K4F35E3LG in technical solutions?
    Answer: It is important to follow the manufacturer's guidelines and recommendations for safe usage, including proper grounding, insulation, and protection against overcurrent or overvoltage conditions.