Intersil
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ISL28214FUZ-T7
Lihat Butiran Helaian data

ISL28214FUZ-T7

Product Overview

Category

ISL28214FUZ-T7 belongs to the category of integrated operational amplifiers (op-amps).

Use

This product is commonly used in various electronic circuits and systems that require amplification of analog signals.

Characteristics

  • High gain: The ISL28214FUZ-T7 offers a high voltage gain, making it suitable for applications requiring signal amplification.
  • Low noise: This op-amp has low input-referred noise, ensuring accurate signal processing.
  • Wide bandwidth: With a wide bandwidth, this product can handle high-frequency signals effectively.
  • Low power consumption: The ISL28214FUZ-T7 operates at low power, making it energy-efficient.

Package

The ISL28214FUZ-T7 comes in a small form factor package, known as the μSOIC-8. This package is compact and allows for easy integration into various circuit designs.

Essence

The essence of the ISL28214FUZ-T7 lies in its ability to amplify analog signals accurately and efficiently, while consuming minimal power.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage Range: ±2V to ±18V
  • Input Offset Voltage: 1mV (maximum)
  • Input Bias Current: 10nA (maximum)
  • Gain Bandwidth Product: 4MHz
  • Slew Rate: 2.5V/μs
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The ISL28214FUZ-T7 has a total of 8 pins, which are assigned specific functions:

  1. V- (Negative Power Supply)
  2. IN- (Inverting Input)
  3. IN+ (Non-Inverting Input)
  4. V+ (Positive Power Supply)
  5. OUT (Output)
  6. NC (No Connection)
  7. NC (No Connection)
  8. V- (Negative Power Supply)

Functional Features

  • Rail-to-Rail Inputs and Outputs: The ISL28214FUZ-T7 supports rail-to-rail input and output voltage ranges, allowing for maximum signal swing.
  • Unity-Gain Stable: This op-amp is unity-gain stable, making it suitable for applications requiring a gain of 1.
  • Low Distortion: The ISL28214FUZ-T7 exhibits low harmonic distortion, ensuring accurate signal reproduction.
  • Short-Circuit Protection: This product incorporates short-circuit protection, safeguarding the op-amp from damage in case of a short circuit.

Advantages and Disadvantages

Advantages

  • High gain and wide bandwidth enable accurate amplification of signals across a broad frequency range.
  • Low noise ensures precise signal processing.
  • Compact package allows for easy integration into various circuit designs.
  • Low power consumption results in energy-efficient operation.

Disadvantages

  • Limited supply voltage range compared to some other op-amps on the market.
  • Relatively low slew rate may limit its suitability for high-speed applications.

Working Principles

The ISL28214FUZ-T7 operates based on the principles of differential amplification. It amplifies the voltage difference between its inverting and non-inverting inputs, producing an amplified output signal.

Detailed Application Field Plans

The ISL28214FUZ-T7 finds applications in various fields, including: 1. Audio Amplification: This op-amp can be used in audio amplifiers to enhance the volume and quality of sound signals. 2. Sensor Signal Conditioning: It is suitable for conditioning signals from sensors such as temperature sensors, pressure sensors, etc., before further processing. 3. Active Filters: The ISL28214FUZ-T7 can be utilized in active filter circuits to shape and modify the frequency response of signals. 4. Instrumentation Amplifiers: It can serve as a building block for instrumentation amplifiers used in measurement and control systems.

Detailed and Complete Alternative Models

  1. LM358: This dual operational amplifier offers similar functionality and is widely available in the market.
  2. MCP6002: Another alternative, this op-amp provides low power consumption and rail-to-rail input/output capabilities.
  3. TL072: This JFET-input operational amplifier is known for its low noise and high gain characteristics.

These alternative models can be considered based on specific application requirements and availability.

Word count: 536 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ISL28214FUZ-T7 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ISL28214FUZ-T7 in technical solutions:

  1. Q: What is ISL28214FUZ-T7? A: ISL28214FUZ-T7 is a dual operational amplifier (op-amp) designed for various applications in industrial, automotive, and consumer electronics.

  2. Q: What is the supply voltage range for ISL28214FUZ-T7? A: The supply voltage range for ISL28214FUZ-T7 is typically between 2.7V and 36V.

  3. Q: What is the input offset voltage of ISL28214FUZ-T7? A: The input offset voltage of ISL28214FUZ-T7 is typically ±0.5mV.

  4. Q: Can ISL28214FUZ-T7 operate at high temperatures? A: Yes, ISL28214FUZ-T7 has a wide temperature range and can operate reliably at temperatures up to 125°C.

  5. Q: What is the typical gain bandwidth product of ISL28214FUZ-T7? A: The typical gain bandwidth product of ISL28214FUZ-T7 is 10MHz.

  6. Q: Does ISL28214FUZ-T7 have rail-to-rail inputs and outputs? A: Yes, ISL28214FUZ-T7 has rail-to-rail inputs and outputs, allowing it to handle signals close to the supply rails.

  7. Q: Can ISL28214FUZ-T7 be used in single-supply applications? A: Yes, ISL28214FUZ-T7 can be used in both single-supply and split-supply applications.

  8. Q: What is the quiescent current consumption of ISL28214FUZ-T7? A: The quiescent current consumption of ISL28214FUZ-T7 is typically 1.6mA per amplifier.

  9. Q: Is ISL28214FUZ-T7 suitable for low-power applications? A: Yes, ISL28214FUZ-T7 has a low power consumption and is suitable for low-power applications.

  10. Q: What are some typical applications of ISL28214FUZ-T7? A: Some typical applications of ISL28214FUZ-T7 include sensor interfaces, signal conditioning, active filters, and precision amplification in various electronic systems.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.