Category: Integrated Circuit (IC)
Use: The ISL83072EIUZA is a high-speed, dual-channel digital isolator designed for use in industrial applications. It provides galvanic isolation between two circuits, allowing for safe and reliable communication.
Characteristics: - High-speed data transmission - Robust isolation barrier - Low power consumption - Wide operating temperature range - Small package size
Package: The ISL83072EIUZA is available in a small outline integrated circuit (SOIC) package. This package offers excellent thermal performance and ease of handling during assembly.
Essence: The essence of the ISL83072EIUZA lies in its ability to provide secure isolation between two circuits while maintaining high-speed data transmission.
Packaging/Quantity: The ISL83072EIUZA is typically sold in reels containing 250 units per reel.
The ISL83072EIUZA features a dual-channel configuration with eight pins. The pinout is as follows:
Pin 1: VDD1
Pin 2: GND1
Pin 3: CH1A
Pin 4: CH1B
Pin 5: NC (No Connection)
Pin 6: NC (No Connection)
Pin 7: CH2A
Pin 8: CH2B
Advantages: - High-speed data transmission capability - Reliable galvanic isolation - Low power consumption - Wide operating temperature range - Compact package size
Disadvantages: - Limited number of channels (dual-channel configuration) - Relatively higher cost compared to non-isolated alternatives
The ISL83072EIUZA utilizes capacitive coupling and proprietary digital isolation technology to transmit data across the isolation barrier. It employs differential signaling techniques to ensure high noise immunity and robustness.
When a signal is applied to one side of the isolator, it is converted into a digital format and transmitted across the isolation barrier using capacitive coupling. On the receiving side, the digital signal is reconstructed and made available for further processing.
The isolation barrier prevents any direct electrical connection between the input and output sides, protecting sensitive components and circuits from potential differences, ground loops, and noise.
The ISL83072EIUZA is widely used in various industrial applications that require secure and reliable communication between isolated circuits. Some common application fields include:
Industrial Automation: The IC is used in PLCs (Programmable Logic Controllers), motor control systems, and industrial communication interfaces to ensure safe and accurate data transmission.
Power Grid Monitoring: It is employed in smart grid systems, energy meters, and power monitoring devices to provide galvanic isolation between measurement circuits and control systems.
Medical Equipment: The IC finds application in medical devices such as patient monitors, diagnostic equipment, and laboratory instruments, where isolation is crucial for patient safety and accurate data acquisition.
Automotive Electronics: It is utilized in automotive systems like electric vehicle charging stations, battery management systems, and CAN bus interfaces to enable secure communication and protect sensitive electronics.
ADuM1200: This dual-channel digital isolator from Analog Devices offers similar specifications and features to the ISL83072EIUZA. It operates at a maximum data rate of 25 Mbps and provides an isolation voltage of 2.5kV RMS.
ISO7741: Texas Instruments' ISO7741 is a quad-channel digital isolator with a data rate of up to 100 Mbps. It offers reinforced isolation and supports a
Sure! Here are 10 common questions and answers related to the application of ISL83072EIUZA in technical solutions:
Q: What is ISL83072EIUZA? A: ISL83072EIUZA is a high-speed, dual-channel digital isolator designed for use in industrial automation, motor control, and other applications that require high noise immunity and robust performance.
Q: What is the maximum data rate supported by ISL83072EIUZA? A: ISL83072EIUZA supports data rates up to 100 Mbps, making it suitable for high-speed communication requirements.
Q: Can ISL83072EIUZA be used in harsh environments? A: Yes, ISL83072EIUZA is designed to operate reliably in harsh industrial environments with wide temperature ranges and high levels of electrical noise.
Q: How many channels does ISL83072EIUZA have? A: ISL83072EIUZA is a dual-channel isolator, meaning it has two independent isolation channels.
Q: What is the isolation voltage rating of ISL83072EIUZA? A: ISL83072EIUZA has an isolation voltage rating of 2.5 kVrms, providing a high level of protection against voltage spikes and transients.
Q: Can ISL83072EIUZA be powered from a single supply voltage? A: Yes, ISL83072EIUZA can be powered from a single supply voltage ranging from 3.0V to 5.5V, simplifying the design and reducing component count.
Q: Does ISL83072EIUZA support bidirectional communication? A: Yes, ISL83072EIUZA supports bidirectional communication, allowing data to be transmitted in both directions across the isolation barrier.
Q: What is the typical propagation delay of ISL83072EIUZA? A: The typical propagation delay of ISL83072EIUZA is 15 ns, ensuring fast and efficient data transfer.
Q: Can ISL83072EIUZA be used with different logic families? A: Yes, ISL83072EIUZA is compatible with a wide range of logic families, including TTL, CMOS, and LVCMOS.
Q: Is ISL83072EIUZA RoHS compliant? A: Yes, ISL83072EIUZA is RoHS compliant, meeting the requirements for environmentally friendly manufacturing processes.
Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.