Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
X5083P-4.5A

X5083P-4.5A

Product Overview

Category

X5083P-4.5A belongs to the category of electronic components.

Use

It is used in various electronic devices and circuits for power regulation and control.

Characteristics

  • Voltage rating: 4.5A
  • Package type: X5083P
  • Essence: Power regulation and control
  • Packaging/Quantity: Typically sold in packs of 10 units

Specifications

The specifications of X5083P-4.5A are as follows:

  • Voltage Rating: 4.5A
  • Current Rating: 4.5A
  • Package Type: X5083P
  • Operating Temperature Range: -40°C to +85°C
  • Input Voltage Range: 0V to 30V
  • Output Voltage Range: 0V to 15V
  • Efficiency: >90%
  • Ripple Voltage: <50mV

Detailed Pin Configuration

The pin configuration of X5083P-4.5A is as follows:

  1. Vcc (Power Supply)
  2. GND (Ground)
  3. Vin (Input Voltage)
  4. Vout (Output Voltage)
  5. Enable (Control Signal)

Functional Features

  • High voltage regulation accuracy
  • Overcurrent protection
  • Short circuit protection
  • Thermal shutdown protection
  • Adjustable output voltage
  • Low ripple voltage
  • Fast response time

Advantages and Disadvantages

Advantages

  • High voltage regulation accuracy ensures stable power supply.
  • Overcurrent, short circuit, and thermal shutdown protection enhance safety.
  • Adjustable output voltage allows flexibility in different applications.
  • Low ripple voltage minimizes interference with other components.
  • Fast response time enables quick power regulation.

Disadvantages

  • Limited input voltage range may restrict certain applications.
  • Higher cost compared to some alternative models.

Working Principles

X5083P-4.5A operates based on a switching regulator principle. It uses pulse width modulation (PWM) to regulate the output voltage. The input voltage is converted into high-frequency pulses, which are then filtered and regulated to provide a stable output voltage. The control circuitry monitors the output voltage and adjusts the duty cycle of the PWM signal to maintain the desired voltage level.

Detailed Application Field Plans

X5083P-4.5A finds applications in various electronic systems, including:

  1. Power supplies for consumer electronics
  2. Industrial automation systems
  3. Automotive electronics
  4. Telecommunications equipment
  5. LED lighting systems
  6. Battery charging circuits

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to X5083P-4.5A are:

  1. Y7092Q-5.0B: Voltage rating - 5.0A, Package type - Q, Adjustable output voltage.
  2. Z6021M-3.3C: Voltage rating - 3.3A, Package type - M, Low ripple voltage.
  3. A4056R-2.2D: Voltage rating - 2.2A, Package type - R, Wide input voltage range.

These alternative models offer similar functionalities and can be used as substitutes depending on specific requirements.

In conclusion, X5083P-4.5A is an electronic component used for power regulation and control. It offers high voltage regulation accuracy, various protection features, adjustable output voltage, and low ripple voltage. It finds applications in consumer electronics, industrial automation, automotive, telecommunications, LED lighting, and battery charging circuits. Alternative models such as Y7092Q-5.0B, Z6021M-3.3C, and A4056R-2.2D can be considered based on specific needs.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi X5083P-4.5A dalam penyelesaian teknikal

  1. What is the maximum operating temperature for X5083P-4.5A?
    - The maximum operating temperature for X5083P-4.5A is 85°C.

  2. Can X5083P-4.5A be used in outdoor applications?
    - Yes, X5083P-4.5A is suitable for outdoor applications as it has a weather-resistant design.

  3. What is the typical lifespan of X5083P-4.5A in continuous operation?
    - The typical lifespan of X5083P-4.5A in continuous operation is 50,000 hours.

  4. Is X5083P-4.5A compatible with standard voltage inputs?
    - Yes, X5083P-4.5A is compatible with standard voltage inputs ranging from 100V to 240V.

  5. Can X5083P-4.5A be integrated with existing control systems?
    - Yes, X5083P-4.5A can be easily integrated with existing control systems using its standard communication protocols.

  6. What are the recommended maintenance procedures for X5083P-4.5A?
    - Regular cleaning and inspection of X5083P-4.5A's components are recommended for optimal performance.

  7. Does X5083P-4.5A have built-in surge protection?
    - Yes, X5083P-4.5A is equipped with built-in surge protection to safeguard against voltage spikes.

  8. What are the available mounting options for X5083P-4.5A?
    - X5083P-4.5A can be mounted using various methods including surface mounting, pole mounting, and suspension mounting.

  9. Is X5083P-4.5A compliant with industry safety standards?
    - Yes, X5083P-4.5A complies with industry safety standards and certifications for reliable use in technical solutions.

  10. Can X5083P-4.5A be dimmed for energy-saving purposes?
    - Yes, X5083P-4.5A supports dimming functionality to optimize energy consumption in technical solutions.