Intersil
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
X9317ZV8
Lihat Butiran Helaian data

X9317ZV8

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Potentiometer
  • Characteristics: Programmable, Non-volatile, 100 Taps
  • Package: SOIC-8
  • Essence: Provides a digitally controlled variable resistor
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Resistance Range: 0 to 10kΩ
  • Resolution: 100 taps
  • End-to-End Resistance Tolerance: ±20%
  • Operating Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • Interface: Serial (3-wire)

Detailed Pin Configuration

The X9317ZV8 has a standard SOIC-8 pin configuration:

  1. VCC: Power supply voltage input
  2. H: High terminal of the resistor element
  3. W: Wiper terminal of the resistor element
  4. L: Low terminal of the resistor element
  5. CS: Chip select input for serial communication
  6. SCL: Serial clock input
  7. SDA: Serial data input/output
  8. GND: Ground reference

Functional Features

  • Digitally programmable resistance
  • Non-volatile memory for storing settings
  • Incremental or decremental tap selection
  • Low power consumption
  • High reliability and durability

Advantages and Disadvantages

Advantages

  • Easy to integrate into various electronic systems
  • Allows precise and flexible resistance adjustment
  • Eliminates the need for mechanical potentiometers
  • Offers long-term stability and repeatability
  • Saves board space and reduces component count

Disadvantages

  • Limited resolution compared to some other digital potentiometers
  • Higher cost compared to traditional potentiometers
  • Sensitivity to electrostatic discharge (ESD)

Working Principles

The X9317ZV8 is based on the principle of a digital potentiometer. It consists of a resistor network and a wiper that can be digitally controlled. The resistance between the wiper terminal and either end terminal can be adjusted by programming the IC. The non-volatile memory ensures that the resistance setting is retained even when power is removed.

Detailed Application Field Plans

The X9317ZV8 finds applications in various fields, including:

  1. Audio equipment: Volume control, tone adjustment
  2. Industrial automation: Calibration, feedback control
  3. Test and measurement instruments: Signal conditioning, calibration
  4. Communication systems: Gain control, impedance matching
  5. Automotive electronics: Climate control, motor control

Detailed and Complete Alternative Models

  1. X9C103S: 10kΩ, 100 taps, DIP-8 package
  2. MCP401X: 5kΩ, 256 taps, SOT-23 package
  3. AD8403: 50kΩ, 256 taps, TSSOP-16 package
  4. CAT5114: 100kΩ, 128 taps, MSOP-10 package
  5. MAX5486: 1MΩ, 256 taps, QSOP-16 package

These alternative models offer different specifications and package options to suit specific application requirements.

Word count: 314 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi X9317ZV8 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of X9317ZV8 in technical solutions:

  1. Q: What is X9317ZV8? A: X9317ZV8 is a digitally controlled potentiometer, also known as a digital potentiometer, which can be used to replace mechanical potentiometers in various electronic circuits.

  2. Q: How does X9317ZV8 work? A: X9317ZV8 consists of a resistor array and a digital control interface. The resistance value can be adjusted by sending digital commands to the device, allowing precise control over the resistance.

  3. Q: What are the typical applications of X9317ZV8? A: X9317ZV8 is commonly used in audio equipment, instrumentation, industrial control systems, and other applications where precise resistance adjustment is required.

  4. Q: Can X9317ZV8 be used as a voltage divider? A: Yes, X9317ZV8 can be used as a voltage divider by connecting it in series with other resistors. The resistance value of X9317ZV8 can be adjusted to achieve the desired voltage division ratio.

  5. Q: What is the resolution of X9317ZV8? A: X9317ZV8 has a resolution of 256 steps, meaning it can provide 256 different resistance values between its minimum and maximum limits.

  6. Q: What is the power supply voltage range for X9317ZV8? A: X9317ZV8 operates within a power supply voltage range of 2.7V to 5.5V.

  7. Q: Can X9317ZV8 handle high currents? A: No, X9317ZV8 is designed for low current applications. It typically has a maximum current rating of around 10 mA.

  8. Q: Is X9317ZV8 digitally programmable? A: Yes, X9317ZV8 can be programmed digitally using a microcontroller or other digital interface. This allows for easy integration into digital control systems.

  9. Q: Does X9317ZV8 have non-volatile memory? A: Yes, X9317ZV8 has non-volatile memory, which means it retains its resistance setting even when power is removed.

  10. Q: Can X9317ZV8 be used in harsh environments? A: X9317ZV8 is not specifically designed for harsh environments. It is recommended to use appropriate protection measures, such as conformal coating or enclosures, if the application requires operation in harsh conditions.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements of X9317ZV8.